| About IIT Kharagpur
A- A= A+ | A A | Hindi Website

Home  > Academics  > Academic Units  > Departments > Metallurgical and Materials Engineering > Siddhartha Das

Faculty

Metallurgical and Materials Engineering

Responsibilities
  • Managing Director, STEP
  • Prof-in-Charge, Incubation & Enterpreneurship, SRIC
Contact
  •  sdas@metal.iitkgp.ac.in
  •  +91-3222-283256

Bio Sketch

  • IIM Distinguished Educator Awa
  • Indranil, 1983
  • MRSI Medal, 2006
  • TMS Technology Award USA,2015
  • Vidya Bharati, 1983

Electrodeposited Coating:

  1. Development of corrosion resistant functionally gradient Alloys (Ni-Zn):
This coating on steel consists of an alloy of Zn and Ni. Zn is anodic to Iron, whereas Ni is cathodic. Hence, a Zn-Ni undercoat followed by Ni coating provide a combination of cathodic and anodic coating 
  1. Development of corrosion resistant composite coatings (Ni-ZrO2, Cu-SiC, Ni-CeO2, Ni-Co-SiC) with high wear resistance:  
This composite assembly is designed to perform both as corrosion resistant as well as wear resistant coating. Ni and Cu provide cathodic protection to steel and hard particles like SiC, CeO2, and ZrO2 when dispersed within the matrix provide excellent wear resistance. Pulse electrodeposition technique is employed to synthesis this composite coating.
Lead-free Solder:
  1. Development of Creep resistant Sn-Cu-Y2O3 composite solder :
This Sn-Cu eutectic composition is an environment friendly alternative to the conventional toxic Sn-Pb based solders. The distribution of hard Yttria particles within the matrix enhances the creep property.
  1. Development of Creep resistant Sn-Ag-CeO2 composite solder:
Copper is replaced by silver for better conductivity
Electrodes for Li-ion battery:
  1. Development of Sn-alloy based porous multiphase electrodes for Li-ion battery:
 
Sn-alloys form intermetallics with lithium having capacities at least thrice than that of the commercial graphite electrodes. However, they suffer from high volumetric strain. In order to minimize the strain a porous multiphase tin alloy is electrodeposited on copper foil. This porous framework minimizes the strain by providing space for the lithiated product to expand.
    The conventional copper foil is replaced with a foamy current collector. The foamy structure was fabricated by electrodeposition by exploiting hydrogen evolution as dynamic template. The foamy collector buffers the volumetric strain generated at the interface of the collector and the electrode (Sn-alloy). Thus, it prevents the detachment of the electrode. 
     




    Principal Investigator

    New Generation Multifunctional Green Nanocomposite Coatings for the Control of Biodeterioration of Cultural Heritage Department of Science and Technology (DST)

    Development of Cheap and High Energy Density Alkali Metal - Ion Rechargeable Batteries for Renewable Energy Storage (Proposal ID : IITKGP_001) Accurate Industrial Controls Pvt. Ltd.

    Synthesis and characterization of molybdenum disilicide heating element Naskar and Company

    Study on the effect of heat-treatment on microstructures and properties of SUP9 and SUP11A steels Soni Auto & Allied Industries Ltd.


    Co-Principal Investigator

    Development of Facile, Green and Commercially Scalable, Non-Cyanide Bath Based Electrodeposition Route for Nanostructured Coloured Gold Coating with Advanced Mechanical and Scratch Resistance Properties (UAY_II_IITKGP_002) Chandrani Pearls Pvt. Ltd.


    Ph.D. Students

    Shakti Mishra
    Area of Research: Composite Materials

    Jayanta Mondal
    Area of Research: Physical Metallurgy

    Sambedan Jena
    Area of Research: Energy Materials

    Vijendra Kumar
    Area of Research: Physical Metallurgy

    Arijit Mitra
    Area of Research: Energy Materials

    Unmesha Ray
    Area of Research: Energy Materials

    Pakanati Siva Prasad
    Area of Research: Processing and Characterization of Advanced Materials

    Arghyadeep Sau
    Area of Research: Surface Coatings

    Bangmaya Satpathy
    Area of Research: Surface Coatings

    Sanhita Mandal
    Area of Research: Processing and Characterization of Advanced Materials

    Snehasish Adhikari
    Area of Research: Processing and Characterization of Advanced Materials

    Rohit Anand
    Area of Research: Energy Materials

    Sarmistha Guha
    Area of Research: Advanced Materials

    Pankaj Kumar
    Area of Research: Surface Coatings

    Juan David Matallana Guerrero
    Area of Research: Surface Engineering