Indian Institute of Technology Kharagpur |

Journal

Radio frequency-induced catalysis using multi-component two-dimensional quasicrystals for effective sulfamethoxazole removal from water by Manzoor Z., Karthik R., Ferreira M.A., Galvao D.S., Mukhopadhyay N.K., Yadav T.P., Dadhwal P., Saka P.C., Woellner C.F., Chowdhury S., Tiwary C.S. Applied Catalysis B: Environmental 383 - (2026)
Radio frequency-induced catalysis using multi-component two-dimensional quasicrystals for effective sulfamethoxazole removal from water by Manzoor Z., Karthik R. , Ferreira M. A., Galvao D. S., Mukhopadhyay N. K., Yadav T. P., Dadhwal P. , Saka P. C., Woellner C. F., Chowdhury S. , Tiwary C. S. Applied Catalysis B: Environment and Energy 383 126062- (2026)
Recent Trends in Two-Dimensional Transition Metal-Tellurides and Their Applications by Chowde Gowda C., Yadav T.P., Chaudhary V., Kar S., Susarla S., Mukhopadhyay N.K., Tiwary C.S. Small 22 - (2026)
Atomistic-to-Device Understanding of Oxygen Reduction Using Redox-Active Lanthanide-Coupled Carbon Nitride Nanoparticles for Bio-Electrochemical Power Generation in Microbial Fuel Cells by Kuila S.K., Raj R., Gorai D.K., Ghosh D., Pradhan D., Tiwary C.S., Kundu T.K., Ghangrekar M.M., Dubey B.K., Dutta A. Small Methods - (2026)
Utilizing Green Graphene to Enhance Cement Compressive Strength and Accelerate Curing by Singh H., Verma A., Taran J., Katiyar N.K., Das B.K., Bhattacharya J., Tiwary C.S. Journal of Materials in Civil Engineering 38 - (2026)
Engineered 3D-printed Bi4O5I2@hematite scaffolds for visible light photocatalytic degradation of cresols by Rawat A., de Oliveira R.B., Pal T., Lima K.A.L., Fabris G.S.L., Tromer R.M., Pereira Junior M.L., Singh A., Gupta A.K., Galvão D.S., Tiwary C.S. Journal of Materials Chemistry A 14 2871-2883 (2026)
Localized RF Heating-Driven Thermoelectric Power Generation in Natural Galena (PbS) by R K., Zheng Y., Kumar Sahu R., Punathil Raman S., Banik S., Vashisth A., Tiwary C.S. ACS Applied Electronic Materials 8 1600-1613 (2026)
Scalable and Sustainable Growth of Bronze Telluride for Thermoelectric Energy Harvesting by Rajeev K., Abhijith M.B., Quispe J.G., Pal V., Paliwal M., Roy A.K., Autreto P.A.D.S., Punathil Raman S., Ajayan P.M., Tiwary C.S. Advanced Sustainable Systems 10 - (2026)
Magnetocaloric effect observations near room temperature in few-layered chromium telluride (Cr2Te3) by Tiwari N., Chowde Gowda C., Mishra S., Pandey P., Talapatra S., Chaudhary V., Singh A.K., Tiwary C.S. Nanoscale 18 1994-2007 (2026)
Manganese- Copper- Gallium Alloys for Sustainable Refrigeration Through a Synergistic Study of Magnetocaloric and Mechanical Behavior by Tiwari N., Mishra S., Kumar A., Malik V.K., Roy D., Paliwal M., Chaudhary V., Singh A.K., Tiwary C.S. Advanced Engineering Materials 28 - (2026)
Material Characterization of Ethanolic Preparation of Nux vomica: Structural and Functional Analysis from Mother Tincture to 200cH by Slathia S., Paul S., Singh S., Vadivel K., Singh S., Sharma P., Mahto L., Narula R.H., Kaushik S., Tiwary C.S. Homeopathy - (2026)
Size-dependent two-photon absorption and ultralow optical-limiting response in atomically-thin rhodonite by Mitra D., Campos de Oliveira C., Kartsev A., Sadhukhan R., Sarkar J.K., Safronov A.A., Goswami D.K., Costin G., Alves da Silva Autreto P., Tiwary C.S., Datta P.K. Nanoscale 18 5482-5495 (2026)
Microstructure engineered multiphase tellurides with enhanced thermoelectric efficiency by Pal V., Sivaprahasam D., Tiwary C.S., Paliwal M. Journal of Materials Chemistry A 14 3771-3791 (2026)
Multicomponent 2D quasicrystals as robust photocatalysts for antibiotic degradation: Mechanistic insights via in situ TEM and atomistic simulations by Manzoor Z., Chowdhury S., da Silva Lopes Fabris G., Ipaves B., Galvão D.S., Tiwary C.S. Journal of Hazardous Materials 507 - (2026)
Multicomponent 2D quasicrystals as robust photocatalysts for antibiotic degradation: Mechanistic insights via in situ TEM and atomistic simulations by Manzoor Z., Chowdhury S. , Lopes Fabris G. D., Ipaves B. , Galvão D. S., Tiwary C. S. Journal of Hazardous Materials 507 141638- (2026)
Nature-Inspired Photoresponsive Bionic Robots Using the Tellurium MoS2 Graphene Hybrid Structure by Salian R.D., Das A.K., Patil A., Tiwary C.S., Kumbhakar P. ACS Applied Materials and Interfaces 18 17083-17094 (2026)
Nickel-Enforced MoS2/MoTe2 Heterostructure for Energy Harvesting from Stray Magnetic Field by Yadav S.K., Mishra S., Salian R.D., Mathias R., Slathia S., Tiwari N., Tiwary C.S., Singh A.K., Kumbhakar P. Advanced Sustainable Systems 10 - (2026)
3D printed F-doped g-C3N4 reinforced porous boehmite for efficient degradation of broad-spectrum antibiotics under visible light irradiation by Dey D., Joseph A., Tiwary C.S., Chowdhury S., Sen R. Separation and Purification Technology 382 - (2026)
Defect-Engineered Layer-Dependent Nonlinear Optical Response in 2D Muscovite for Efficient Optical Limiting by Mitra D., Fabris G.S.L., Benjamim De Oliveira R., Sadhukhan R., Sarkar J.K., Ferrer M.M., Junior M.L.P., Mahapatra P.L., Goswami D.K., Costin G., Galvão D.S., Tiwary C.S., Datta P.K. Advanced Optical Materials 14 - (2026)
Immiscible Cu-W and Cu-Nb composites processed by pellet-based laser additive manufacturing by Das R., Dubey P.K., Katiyar N.K., Mishra V., Sarkar S., Manna I., Chakraborty S., Tiwary C.S. Journal of Materials Processing Technology 349 - (2026)
Impact Resistance of Complex 3D-Printed Schwarzites Structures by Ambekar R.S., Oliveira E.F., Pugazhenthi P., Singh S., Roy Mahapatra D., Galvao D.S., Tiwary C.S. Advanced Engineering Materials 28 - (2026)
Zeolites topology inspired multi-material-based 3D printing of porous composite structures with high resilience by Singh H., Santos A.B., Das D., Ambekar R.S., Woellner C.F., Nagarajaiah S., Tiwary C.S. Progress in Additive Manufacturing 10 8157-8169 (2025)
Exploring Sustainable Hydrogen Production from Alkaline Fresh and Seawater Using Natural Ore Derived 2D Bi2S3 by Chattopadhyay S., de Oliveira C.C., Bhar R., Banik D., Pieshkov T.S., Puthirath A.B., Pramanik A., Sreeram P.R., Saju S.K., Costin G., Vajtai R., Dubey B.K., Biswas K., da Silva Autreto P.A., Tiwary C.S., Ajayan P.M. Small 21 - (2025)
Layered natural oxide based soft actuators for controlling artificial motion by chemical stimulus by Salian R.D., Mathias R., Kumar M.S., Tiwary C.S., Das A.K., Kumbhakar P. Materials Today Chemistry 45 - (2025)
Native Oxide MoO? MoSe? Heterostructure-Based Self-Powered Gas Sensor for Selective NO? and H? Detection by Mondal D., Sharma D., Karthik R., Ashik Manoj N., Tiwary C.S., Bhat N., Kamble V.B. Small 21 - (2025)
Hydrogen evolution reactions using 3D printed composites of copper with graphene and hexagonal boron nitride by Das R., Benjamim R., Kotal M., Machado L., Galvao D.S., Tiwary C.S. Chemical Communications 61 9039-9042 (2025)
AlMnPdPtAu Quasicrystal Modulated Carbon Nanotubes for H2 Sensors: Experimental and DFT Computational Analysis by Kumar S., Chakraborty A., Gomez Quispe J.R., Mitra R., Barala S., Autreto P.A.D.S., Tiwary C.S., Biswas K., Kumar M. ACS Applied Materials and Interfaces - (2025)
Pressure-driven semiconductor-metal transition in two-dimensional InSiTe3: a DFT study of thermoelectric and optoelectronic properties by Singh A.K., Banik D., Sreeram P.R., Tiwary C.S., Kundu T.K. Computational Materials Science 258 - (2025)
Magnetic Field Effects in 2D Manganese Ditelluride Supercapacitors by Chowde Gowda C., Mandal D., Chandravanshi D., Pandey P., Chandra A., Tiwary C.S. Energy Technology 13 - (2025)
Magnetocaloric effect in Mn-rich Heusler-derived alloys for room temperature-based applications by Tiwari N., Mishra S., Sarkar S., Talapatra S., Palit M., Paliwal M., Singh A.K., Tiwary C.S. Journal of Materials Chemistry C 13 10789-10803 (2025)
Properties of highly controlled laser-melted aluminium nickel eutectic alloys and fundamental insights on the dynamics of nonequilibrium thermal processing by Das R., Dubey P.K., Manna I., Chakraborty S., Tiwary C.S. Journal of Materials Science 60 1598-1617 (2025)
Nucleobase identification using two-dimensional cobalt telluride by Chakraborty A., Upadhyaya A., Negedu S.D., Sarkar S., Lahiri B., Maiti P.K., Tiwary C.S. Physical Chemistry Chemical Physics 27 17407-17419 (2025)
Manganese telluride quantum dot decorated 3D printed structures for dye-degradation by Ghosal P., Chowde Gowda C., Chandravanshi D., Malya A., Chattopadhyay K., Kumbhakar P., Gupta A.K., Tiwary C.S. Materials Research Bulletin 189 - (2025)
Deciphering the Interface between Two-Dimensional Aluminum Quasicrystals and Norepinephrine Neurotransmitter by Chakraborty A., Hawthorne F., Yadav T.P., Mukhopadhyay N.K., Dadhwal P., Saka P.C., Lahiri B., Woellner C.F., Tiwary C.S. ACS Applied Materials and Interfaces 17 68552-68565 (2025)
Electronic and optical properties of the recently synthesized 2D Vivianites (Vivianenes): Insights from first-principles calculations by Benjamim de Oliveira R., Ipaves B., da Silva Lopes Fabris G., Slathia S., Lopes Pereira Júnior M., Matozo Tromer R., Sekhar Tiwary C., Soares Galvão D. Solid State Communications 404 - (2025)
Improvement in thermoelectric properties of directionally solidified Bi2Te3-AgBiTe2 eutectic via energy filtering effect by Jigi G.M., Pal V., Pati D., Sreeram P.R., Haile B.S., Negedu S.D., Paliwal M., Olu F.E., Tiwary C.S. Journal of Alloys and Compounds 1039 - (2025)
Pyrite-bismuth telluride heterojunction for hybrid electromagnetic-to-thermoelectric energy harvesting by Karthik R., Zheng Y., de Oliveira C.C., Punathil Raman S., Alves da Silva Autreto P., Vashisth A., Tiwary C.S. Journal of Materials Chemistry C - (2025)
Defect Engineered Few Layered MoS2 for Human Machine Interface by Salian R.D., Mishra S., Gowda C.C., Barik R.K., Singh A.K., Tiwary C.S., Kumbhakar P. Small Methods - (2025)
Mechanistic Understanding and Demonstration of Direct Chemical Vapor Deposition of Transition Metal Dichalcogenides Across Metal Contacts by Sassi L.M., Iyengar S.A., Puthirath A.B., Huang Y., Li X., Terlier T., Mojibpour A., de Carvalho Teixeira A.P., Bharadwaj P., Tiwary C.S., Vajtai R., Talapatra S., Yakobson B., Ajayan P.M. ACS Applied Electronic Materials 7 6499-6510 (2025)
Cellulose fiber (palm fiber and teff straw) reinforced 3D printed composites with enhanced fracture resistance by Bukate B.B., Lemu H.G., Olu F.E., Tolcha M.A., Joseph A., Tiwary C.S. Materials Today Communications 46 - (2025)
Engineering the Atomic Interface of Refractory-Metal-Reinforced Copper Matrix Using Direct Ink 3D Printing by Das R., de Oliveira R.B., Kumar B., Mishra V., Sarkar S., Felix I.D.M., Machado L.D., Tiwary C.S. Advanced Engineering Materials 27 - (2025)
Two-dimensional chromium telluride-coated 3D-printed architectures for energy harvesting by Mondal R., Mathias R., Bastos L.V., Gowda C.C., Tiwari N., Singh H., Woellner C.F., Tiwary C.S., Kumbhakar P. Nanoscale 17 14647-14659 (2025)
Optical properties of MnTe2 few-layer quantum dots by Ninan G.G., Varghese M., Gowda C.C., Bylappa Y., Nag A., Balachandran M., Junior L.R., Tromer R., Galvao D.S., Tiwary C.S., Kumbhakar P. Optical Materials 159 - (2025)
Enhanced corrosion resistance of epoxy composite coatings with green graphite and h-BN heterostructure reinforcement by Bandyopadhyay R., Verma A., Singh H., Bhattacharya J., Dubey B.K., Tiwary C.S. Surfaces and Interfaces 72 - (2025)
2D MnTe/rGO Hybrid Structure for Moisture Energy Harvesting by Kumbhakar P., Mishra S., Gowda C.C., Nishma P.M., Venugopal A., Singh A.K., Tiwary C.S. ACS Applied Materials and Interfaces 17 32973-32983 (2025)
Enhanced Heat Dissipation and Reduced Power Consumption in Electronics Using 2D Hexagonal Boron Nitride by Karthik R., Srivastava A., Midya S., Shanu A., Slathia S., Vandana S., Kar S., Glavin N.R., Roy A.K., Sreeram P.R., Singh A.K., Tiwary C.S. Small 21 - (2025)
Ultrasensitive detection of forever chemical perfluorooctanoic acid using two-dimensional aluminum quasicrystal by Chakraborty A., Tromer R., Yadav T.P., Mukhopadhyay N.K., Lahiri B., Rao R., Roy A.K., Aich N., Woellner C.F., Galvao D.S., Tiwary C.S. Journal of Materials Chemistry A 13 38829-38839 (2025)
Enhanced Magnetocaloric and Mechanical Properties of Novel Mn Ni Cu and Mn Ni Ga Alloys for Near-Room Temperature Applications by Tiwari N., Mishra S., Srivastava A., Sarkar S., Chaudhary V., Paliwal M., Singh A.K., Tiwary C.S. Advanced Engineering Materials 27 - (2025)
Enhanced mechanical, tribological, and thermal properties of copper-graphene composites using additive manufacturing by Das R., Katiyar N.K., Khan A., Owuor P.S., Ike S., Sarkar S., Mishra V., Tiwary C.S. Journal of Manufacturing Processes 136 380-390 (2025)
3D printed F-doped g-C3N4 reinforced porous boehmite for efficient degradation of broad-spectrum antibiotics under visible light irradiation by Dey D., Joseph A. , Tiwary C. S., Chowdhury S. , Sen R. Separation and Purification Technology 382 135867- (2025)
Enhanced Non-Invasive Radio Frequency Heating Using 2D Pyrite (Pyritene) by Rajeev K., Ipaves B., Campos de Oliveira C., Punathil Raman S., Kar S., S Galvao D., Alves da Silva Autreto P., Tiwary C.S. Small Methods - (2025)
Microstructural length scale manipulation via solidification and its influence on mechanical behavior in a high-strength intermetallic-based eutectic alloy by Sharma A., Tiwary C.S., Banerjee D. Journal of Materials Science 60 1522-1534 (2025)
Enhanced thermoelectric performance of sustainable earth-abundant two-dimensional Galena (PbS) by Singh A.K., Karthik R., Punathil Raman S., Kundu T.K., Tiwary C.S. Journal of Materials Science 60 1348-1360 (2025)
Microstructure evolution and thermoelectric behaviour of directionally solidified Bi2Te3 based multiphase thermoelectric by Jigi G.M., Pal V., Haile B.S., Sreeram P.R., Pati D., Negedu S.D., Paliwal M., Olu F.E., Tiwary C.S. Journal of Alloys and Compounds 1010 - (2025)
Microstructure evolution and thermoelectric behaviour of directionally solidified Bi2Te3-Ga2Te3 eutectic alloy by Pal V., Legese S.S., Sreeram P.R., Chattopadhyay K., Paliwal M., Tiwary C.S. Journal of Physics D: Applied Physics 58 - (2025)
Understanding the interface-driven thermoelectric behaviour of Bi2Te3 Ga2Te3 alloys by Pal V., Sreeram P.R., Legese S.S., Srivastava P., Rohini R., Chattopadhyay K., Paliwal M., Tiwary C.S. Journal of Physics and Chemistry of Solids 207 - (2025)
Enhancing mechanical strength and permeation efficiency of green graphene-reinforced chitosan/polyvinylpyrrolidone pervaporation membranes for lycopene separation from tomato waste by Nandeshwar K.A., Kodape S.M., Rathod A.P., Singh H., Das B.K., Tiwary C.S., Bhattacharya J. Journal of the Indian Chemical Society 102 - (2025)
Direct Ink Writing (3D Printing) of Robust, Highly Efficient, Double-Half-Heusler Thermoelectric High-Entropy Alloy by Haile B.S., Pal V., Pal T., Slathia S., Jigi G.M., Negedu S.D., Tiwari N., Singh H., Joseph A., Olu F.E., Tiwary C.S. Advanced Engineering Materials - (2025)
Environmental life cycle assessment of synthesis routes for industrial-scale graphene production from waste-based feed stocks by Siddique S., Cheela V.R.S., Tiwary C.S., Dubey B.K. Environmental Science and Pollution Research 32 10818-10835 (2025)
Particle size-controlled resolution enhancement and mechanical properties of 3D printed alumina monoliths by Joseph A., Ambekar R.S., Rawat A., Ganji S., Agrawal R., Nirmal G., Surya Teja Koniki D.S., Gupta A.K., Tiwary C.S. Ceramics International 51 56629-56641 (2025)
Direct ink writing of metals and metal-based heterostructures by Sajadi S.M., Das R., Thakur M.S.H., Boul P., Rahman M.M., Tiwary C.S., Ajayan P.M. Journal of Materials Science 60 1290-1300 (2025)
Green Energy Harvesting using a Flexible Bio-triboelectric Nanogenerator by Agarwal S., Mukesh P.I., Neog M., Mishra S., Tiwary C.S., Singh A.K., Kumbhakar P. Journal of Electronic Materials 54 2821-2833 (2025)
Green Graphene Reinforcement to Enhance Mechanical and Wear Performance of Styrene Butadiene Rubber-Based Composites by Singh H., Verma A., Vadapalli S.P., Kotal M., Das B.K., SekharTiwary C., Bhattacharya J. Journal of Applied Polymer Science 142 - (2025)
A Comprehensive Review of High-Entropy Alloys for Supercapacitor Application by Mohanty G.C., Gowda C.C., Suriyakumar S., Shaijumon M.M., Tiwary C.S. Energy Technology 13 - (2025)
Interface Engineering of 3D-Printed Liquid Crystal and 2D-White Pearl Composite for Tunable Fluorescence by Mandal N., Hawthorne F., Rao R., Roy A.K., Galvão D.S., Kochat V., Woellner C.F., McConney M.E., Tiwary C.S. Advanced Engineering Materials 27 - (2025)
Role of biofilm activity on novel interwoven lattice-shaped 3D printed biocarrier for enhanced removal of organics and nutrients with reduced footprint: Performance assessment and microbial community dynamics by Preetham V., Saidulu D., Tiwary C.S., Gupta A.K. Bioresource Technology 439 - (2025)
Composition tuning of structural high entropy alloy (Fe-Co-Ni-Cu-Mn/Zn) nano-electrocatalysts for synergistic water splitting by Campos-Mata A., Gakhad P., Banik D., Chandra Mohanty G., Chattopadhyay S., Gangwar B.P., Tiwary C.S., Singh A.K., Roy S., Ajayan P.M., Biswas K. Journal of Materials Chemistry A 13 42006-42016 (2025)
Vacancy-Enhanced Biotite Nanosheets for Optical Limiters by Mitra D., Hasan M. N., Gowda C. C., Costin G. , Tiwary C. S., Karmakar D. , Datta P. K. ACS Applied Nano Materials - (2025)
Additive manufacturing of immiscible/incompatible systems by Das R., Joshi S.S., Owuor P.S., Khan A., Ike S., Kumar P., Dahotre N.B., Tiwary C.S. Materials Today 87 125-150 (2025)
Additive Manufacturing of Topologically Engineered Double Half-Heusler High-Entropy Alloy with Enhanced Thermoelectric Properties by Haile B.S., Pal V., Meher S., Srivastava A., Pal T., Slathia S., Legese S.S., Negedu S.D., Jigi G.M., Chattopadhyay K., Singh A.K., Olu F.E., Tiwary C.S. Advanced Materials Technologies 10 - (2025)
Phosphoferrene for Mancozeb detection: A natural 2D phosphate mineral enhancing pesticide sensing by Slathia S., Santos A.B., Costin G., Sarkar S., Glavin N.R., Roy A.K., Galvao D.S., Woellner C.F., Tiwary C.S. Journal of Environmental Chemical Engineering 13 - (2025)
High entropy oxide nanoparticles for simultaneous photocatalytic degradation of antibiotics, analgesics, and antiepileptics in real water systems under continuous flow mode by Das S., Sain M. , Manzoor Z. , Kumar S. , Sarkar S. , Pradhan D. , Tiwary C. S., Chowdhury S. Journal of Environmental Management 388 125975- (2025)
High entropy oxide nanoparticles for simultaneous photocatalytic degradation of antibiotics, analgesics, and antiepileptics in real water systems under continuous flow mode by Das S., Sain M., Manzoor Z., Kumar S., Sarkar S., Pradhan D., Tiwary C.S., Chowdhury S. Journal of Environmental Management 388 - (2025)
Advancing anammox pathways for wastewater treatment: A focus on conventional carrier challenges and innovations of 3D printed biocarrier by Preetham V., Singh A., Tiwary C.S., Gupta A.K. Journal of Environmental Chemical Engineering 13 - (2025)
Exceptionally High Nonlinear Optical Response in Two-dimensional Type II Dirac Semimetal Nickel Di-Telluride (NiTe2) by Goswami S., de Oliveira C.C., Ipaves B., Mahapatra P.L., Pal V., Sarkar S., Autreto P.A.S., Ray S.K., Tiwary C.S. Laser and Photonics Reviews - (2025)
Wear resistance and conducting property of laser-melted copper graphene composite by Das R., de Oliveira R.B., Tromer R., Galvao D.S., Owuor P.S., Khan A., Katiyar N.K., Machado L.D., Tiwary C.S. Progress in Additive Manufacturing - (2025)
Experimental and theoretical study of size-dependent phase evolution in NaCl-KCl alloys by Kumar S., Mishra S.S., Naskar N., Sarkar S., Kashyap S., Katiyar N.K., Paliwal M., Biswas K., Tiwary C.S., Chattopadhyay K. Next Materials 6 - (2025)
Effect of cooling rate on the microstructure and thermal conductivity of 5 at% Cu Bi2Te3 by Legese S.S., Chandravanshi D., Gadhavajhala S.S.S., Pal V., Serbesa A.T., Srinivasan B., Olu F.E., Tiwary C.S. Journal of Materials Science 60 1313-1327 (2025)
Thermoelectric Transport of a Novel Zr-Based Half-Heusler High-Entropy Alloy by Adamo C.G., Srivastava A., Legese S.S., Kawamura Y., Serbesa A.T., Punathil Raman S., Olu F.E., Tiwary C.S., Singh A.K., Chattopadhyay K. Energy Technology 12 - (2024)
Integrated First Principles and Experimental Investigation of Thermoelectric Transport in Zr/Ti Half-Heusler-Type High Entropy Alloys by Adamo C.G., Srivastava A., Legese S.S., Kumar D., Kawamura Y., Serbesa A.T., Punathil Raman S., Olu F.E., Tiwary C.S., Singh A.K., Chattopadhyay K. Energy Technology - (2024)
Microstructure and thermoelectric properties of as-cast Ag2Te/AgBiTe2 and Ag2Te/Bi2Te3 two-phase alloys by Serbesa A.T., Pal V., Legese S.S., Mukherjee S., Das S., Kumar B., Adamo C.G., Sreeram P.R., Paliwal M., Olu E.F., Tiwary C.S., Chattopadhyay K. Journal of Physics and Chemistry of Solids 190 - (2024)
Quasicrystal Nanosheet/Î±-Fe2O3 Heterostructure-Based Low Power NO2 Sensors: Experimental and DFT Studies by Kumar S., Hojamberdiev M., Chakraborty A., Mitra R., Chaurasiya R., Kwoka M., Tiwary C.S., Biswas K., Kumar M. ACS Applied Materials and Interfaces 16 16687-16698 (2024)
Optical Resonator-Enhanced Random Lasing using Atomically Thin Aluminium-based Multicomponent Quasicrystals by Mandal N., Kumbhakar P., Dey A., Kumbhakar P., Chatterjee U., J. S. de Matos C., Prasad Yadav T., Krishna Mukhopadhyay N., Biswas K., Kochat V., Sekhar Tiwary C. Optics and Laser Technology 175 - (2024)
Harvesting Magneto-Acoustic Waves Using Magnetic 2D Chromium Telluride (CrTe3) by Chowde Gowda C., Kartsev A., Tiwari N., Sarkar S., Alexander S.A., Chaudhary V., Tiwary C.S. Small 20 - (2024)
An LED-driven Hematite/Bi4O5I2 nanocomposite as an S-scheme heterojunction photocatalyst for efficient degradation of phenolic compounds in real wastewater by Rawat A., Srivastava S.K., Tiwary C.S., Gupta A.K. Journal of Materials Chemistry A 13 1271-1286 (2024)
3D-printed flexible energy harvesting devices designed using non-layered two-dimensional natural tourmaline silicates by Mahapatra P.L., Tromer R., Jayakumar A., Costin G., Lahiri B., Nair R.R., Roy D., Roy A.K., Pandey P., Galvao D.S., Tiwary C.S. Journal of Materials Chemistry C 12 3418-3429 (2024)
Intermetallic eutectics with gigapascal strength and enhanced ductility by Gunjal V., Tiwary C.S., Chattopadhyay K., Banerjee D. Intermetallics 168 - (2024)
Thickness dependent nanoscale magnetism in two-dimensional manganese telluride (MnTe) by Slathia S., Tripathi M., Tromer R., Gowda C.C., Pandey P., Galvao D.S., Dalton A., Tiwary C.S. Materials Today Chemistry 38 - (2024)
Thickness dependent tribological and magnetic behavior of two-dimensional cobalt telluride (CoTe2) by Slathia S., Wei C., Tripathi M., Tromer R., Negedu S.D., Boland C.S., Sarkar S., Galvao D.S., Dalton A., Tiwary C.S. 2D Materials 11 - (2024)
Biotene: Earth-Abundant 2D Material as Sustainable Anode for Li/Na-Ion Battery by Pramanik A., Mahapatra P.L., Tromer R., Xu J., Costin G., Li C., Saju S., Alhashim S., Pandey K., Srivastava A., Vajtai R., Galvao D.S., Tiwary C.S., Ajayan P.M. ACS Applied Materials and Interfaces 16 2417-2427 (2024)
Strain-Induced Tribocatalytic Activity of 2D ZnO Quantum Dots by Kumbhakar P., Mishra S., Kumbhakar P., Barik R.K., Tiwary C.S., Singh A.K. Journal of Physical Chemistry C 128 10733-10741 (2024)
High-entropy-based nano-materials for sustainable environmental applications by Das S., Chowdhury S. , Tiwary C. S. Nanoscale 16 8256-8272 (2024)
High-entropy-based nano-materials for sustainable environmental applications by Das S., Chowdhury S., Tiwary C.S. Nanoscale - (2024)
High entropy spinel oxide nanoparticles for visible light-assisted photocatalytic degradation of binary mixture of antibiotic pollutants in different water matrixes by Das S., Kumar S., Sarkar S., Pradhan D., Tiwary C.S., Chowdhury S. Journal of Materials Chemistry A 12 16815-16830 (2024)
Stress concentration targeted reinforcement using multi-material based 3D printing by Singh H., Santos A.B., Das D., Ambekar R.S., Saxena P., Woellner C.F., Katiyar N.K., Tiwary C.S. Applied Materials Today 36 - (2024)
Paramagnetic two-dimensional silicon-oxide from natural silicates by Mahapatra P.L., de Oliveira C.C., Costin G., Sarkar S., Autreto P.A.S., Tiwary C.S. 2D Materials 11 - (2024)
Particle size-dependent anti-corrosion and mechanical behavior of green-graphene composite by Verma A., Tiwary C.S., Bhattacharya J. Progress in Organic Coatings 192 - (2024)
A comprehensive review of atomically thin silicates and their applications by Mahapatra P.L., Costin G., Galvao D.S., Lahiri B., Glavin N., Roy A.K., Ajayan P.M., Tiwary C.S. 2D Materials 11 - (2024)
Human Mastication Analysis A DEM Based Numerical Approach by Mishra R., Deb S.K., Chakrabarty S., Das M., Das M., Panda S.K., Tiwary C.S., Arora A. International Journal for Numerical Methods in Biomedical Engineering 40 - (2024)
Tuning the band gap of manganese telluride quantum dots (MnTe QDs) for photocatalysis by Chowde Gowda C., Chandravanshi D., Tromer R.M., Malya A., Chattopadhyay K., Galvão D.S., Tiwary C.S. Applied Physics A: Materials Science and Processing 130 - (2024)
Effect of Zn/Mn on the supercapacitor behavior of high-entropy FeCoNiCrZn/Mn alloy by Mohanty G.C., Chowde Gowda C., Gakhad P., Sanjay M., Singh A., Biswas K., Tiwary C.S. Energy Advances 3 2972-2985 (2024)
Ultralow Detection of Mancozeb Using Two-Dimensional Cobalt Telluride (CoTe2) by Slathia S., Ipaves B., Campos de Oliveira C., Negedu S.D., Sarkar S., Autreto P.A.S., Tiwary C.S. Langmuir - (2024)
Plasmonically Active Atomically Thin Titanium-Based Quasicrystals for Dopamine Sensing by Mandal N., Santos A.B., Chakraborty A., Sarkar S., Rao R., Glavin N.R., Roy A.K., Kochat V., Yadav T.P., Mukhopadhyay N.K., Galvão D.S., Woellner C.F., Tiwary C.S. ACS Applied Nano Materials 7 15395-15405 (2024)
Sustainable additives for anticorrosive bitumen coatings on carbon steel under marine environment: Harnessing remnant agricultural biomass-derived green graphene by Singh H., Verma A., Joseph A., Danam V.A., Kanti Das B., Sekhar Tiwary C., Bhattacharya J. Materials Letters 369 - (2024)
Multi-Wavelength Optoelectronic Synaptic Transistors Based on Transition Metal Telluride-Sulfide Heterostructures by Das S., Pal V., Mukherjee S., Das S., Tiwary C.S., Ray S.K. Advanced Optical Materials - (2024)
Multi-Wavelength Optoelectronic Synaptic Transistors Based on Transition Metal Telluride-Sulfide Heterostructures by Das S., Pal V. , Mukherjee S. , Das S. , Tiwary C. S., Ray S. K. Advanced Optical Materials - (2024)
Porous 3D Printed System for Synergistic Tandem Water Cleaning-Energy Generation by Ghosal P., Parui A., Singh A.K., Kumbhakar P., Gupta A.K., Tiwary C.S. Advanced Sustainable Systems 8 - (2024)
Positive changes in the mechanical and optical properties of the floor epoxy reinforced with green graphene by Samanta M., Verma A., Singh H., Katiyar N.K., Bandyopadhyay R., Das B.K., Tiwary C.S., Bhattacharya J. Polymer Composites 45 14672-14686 (2024)
Sachharomyces Cerevisae Dry Powder-Mediated Exfoliation of Graphite Chunks into Functionalized Few-Layer Graphene by Mahle R., Suran S., Singh A., Kumbhakar P., Galvao D.S., Cheela V.R.S., Dubey B., Nair R.R., Tiwary C.S., Banerjee R. ACS Sustainable Chemistry and Engineering 12 11891-11900 (2024)
Schwarzite-based 3D-printed carriers for enhanced performance of sequencing batch biofilm reactor (SBBR) for wastewater treatment by Srivastava A., Ambekar R.S., Gupta B., Tiwary C.S., Gupta A.K. Journal of Environmental Chemical Engineering 12 - (2024)
Liquid monomer phase exfoliation of non-van der Waals hematite and processing of poly(methyl methacrylate) hematene composite substrates by Tohgha U., Carothers K., Krein D.M., Brennan M.C., Costin G., Tiwary C.S., Grusenmeyer T.A., McConney M.E., Stevenson P.R. MRS Communications 14 935-941 (2024)
Schwarzites and Triply Periodic Minimal Surfaces: From Pure Topology Mathematics to Macroscale Applications by Felix L.C., Ambekar R., Tromer R.M., Woellner C.F., Rodrigues V., Ajayan P.M., Tiwary C.S., Galvao D.S. Small - (2024)
Unlocking the Potential: Atomically Thin 2D Fluoritene from Exfoliated Fluorite Ore and Its Electrochemical Activity by Chattopadhyay S., Mahapatra P.L., Mattur M.N., Pramanik A., Gupta S., Pieshkov T.S., Saju S., Costin G., Vajtai R., Tiwary C.S., Yakobson B.I., Ajayan P.M. Nano Letters 24 7284-7292 (2024)
Flexible Nanogenerators Based on Enhanced Flexoelectricity in Mn3O4 Membranes by Chowde Gowda C., Cavin J., Kumbhakar P., Tiwary C.S., Mishra R. Small 20 - (2024)
Self-Assembled Ultrathin H-terminated Si Nanosheet/g-C3N4 Heterojunction for Photocatalytic Hydrogen Evolution by Cai R., Wang Y., Wang J., Zhang J., Yu C., Cui J., Zhang Y., Tiwary C.S., Wu Y. ACS Applied Nano Materials 7 11136-11145 (2024)
Low-temperature dry reforming using high entropy alloy (Co-Fe-Ga-Ni-Zn)-cerium oxide (CeO2) hybrid nanostructure by Gangwar B.P., Tripathi P., Das R., Sarkar S., Kumar Singh A., Sekhar Tiwary C., Sharma S. Chemical Engineering Journal 495 - (2024)
Nickel Telluride Quantum Dots as a Counter Electrode for an Efficient Dye-Sensitized Solar Cell by Narendhiran S., Midya S., Mahapatra P.L., Balachandran M., Tiwary C.S., Singh A.K., Kumbhakar P. ACS Applied Electronic Materials 6 487-495 (2024)
Tailoring Ni/Fe Doping for Superior Thermoelectric Performance of Zr2Ni2 xFexSnSb (x = 0.30, 0.35, 0.40) High-Entropy Alloys by Adamo C.G., Srivastava A., Kumar D., Legese S.S., Sreeram P.R., Mangalassery N.M., Kawamura Y., Olu F.E., Tiwary C.S., Singh A.K., Chattopadhyay K. Energy Technology - (2024)
Engineered Two-Dimensional Transition Metal Dichalcogenides for Energy Conversion and Storage by Roy S., Joseph A., Zhang X., Bhattacharyya S., Puthirath A.B., Biswas A., Tiwary C.S., Vajtai R., Ajayan P.M. Chemical Reviews 124 9376-9456 (2024)
Non-thermal magnetic deicing using two-dimensional chromium telluride by Chowde Gowda C., Kartsev A., Tiwari N., Safronov A.A., Pandey P., Roy A.K., Ajayan P.M., Galvão D.S., Tiwary C.S. Journal of Materials Chemistry C 12 18691-18703 (2024)
Enhanced energy density of high entropy alloy (Fe-Co-Ni-Cu-Mn) and green graphene hybrid supercapacitor by Mohanty G.C., Chowde Gowda C., Gakhad P., Verma A., Das S., Chowdhary S., Bhattacharya J., K Singh A., Biswas K., Tiwary C.S. Energy Storage 6 - (2024)
Enhanced energy density of high entropy alloy (Fe-Co-Ni-Cu-Mn) and green graphene hybrid supercapacitor by Mohanty G. C., Gowda C. C., Gakhad P. , Verma A. , Das S. , Chowdhury S. , Bhattachary J. , Singh A. K., Biswas K. , Tiwary C. S. Energy Storage 6 668- (2024)
Printing resolution effect on mechanical properties of porous boehmite direct ink 3D printed structures by Ambekar R.S., Joseph A., Ganji S., Agrawal R., Nirmal G., Tiwary C.S. Ceramics International 50 44447-44456 (2024)
Composite strengthening via stress-concentration regions softening: The proof of concept with Schwarzites and Schwarzynes inspired multi-material additive manufacturing by Singh H., Bastos L.V., Das D., Ambekar R.S., Woellner C., Pugno N.M., Tiwary C.S. Additive Manufacturing 90 - (2024)
Enhanced Mechanical Properties of Direct Ink Writing (3D Printed) Hexagonal Boron Nitride Reinforced Porous Boehmite Structures by Ambekar R.S., Joseph A., Ganji S., Nirmal G., Agrawal R., Tiwary C.S. Advanced Engineering Materials - (2024)
Utilization of High Entropy Alloy (Co Cu Fe Mn Ni) and Support (CeO2) Interaction for CO2 Conversion into Syngas by Gangwar B.P., Mitra R., Parui A., Gakhad P., Yadav P.K., Singh A.K., Tiwary C.S., Biswas K., Sharma S. Advanced Sustainable Systems 8 - (2024)
Enhanced Metastable Solubility by Ball Milling of Rapidly Solidified Cu-Co-Mn Ribbon by Chabri S., Tiwary C.S. Journal of Materials Engineering and Performance - (2024)
Enhanced Thermoelectric Performance of Nanostructured 2D Tin Telluride by Singh A.K., Karthik R., Sreeram P.R., Kundu T.K., Tiwary C.S. Small 20 - (2024)
Enhanced toughness and strength of 3D printed carbide-oxide composite for biomedical applications by Das M., Dixit A. , Jana A. , Karthik R. , Sreeram P. R., Bora H. , Dhara S. , Panda S. K., Tiwary C. S. Journal of the Mechanical Behavior of Biomedical Materials 19 106290-106290 (2024)
Material extrusion of topologically engineered architecture inspired by carbon-based interlocked petal-schwarzites by Ambekar R.S., Bastos L.V., Galvao D.S., Tiwary C.S., Woellner C.F. Carbon Trends 17 - (2024)
Enhanced toughness and strength of 3D printed carbide-oxide composite for biomedical applications by Das M., Dixit A., Jana A., Karthik R., Sreeram P.R., Bora H., Dhara S., Panda S.K., Tiwary C.S. Journal of the Mechanical Behavior of Biomedical Materials 150 - (2024)
Enhancement of hydrophobic, resistive barrier and anticorrosion performance of epoxy coating with addition of Clay-Modified Green Silico-Graphitic Carbon by Verma A., Tiwary C.S., Bhattacharya J. Carbon Trends 15 - (2024)
Enhancement of simultaneous nitrification denitrification (SND) and simultaneous nitrification-anammox-denitrification (SNAD) via 3D printed carriers: Insights into critical factors, functional microbes, and potential solutions by Preetham V., Saidulu D., Tiwary C.S., Gupta A.K. Journal of Cleaner Production 458 - (2024)
Gd3+ Encapsulation on 2D-g-C3N4 Nanostructure for Spintronics and Ultrasound Assisted Photocatalytic Applications: First-Principles and Experimental Studies by Kuila S.K., Gorai D.K., Agarwal S., Sarkar R., Tiwary C.S., Kundu T.K. Small - (2024)
Visible light driven Z-scheme -MnO2 (1D)/Bi7O9I3 (2D) heterojunction photocatalyst for efficient degradation of bisphenol A in water by Rawat A., Srivastava S.K., Tiwary C.S., Gupta A.K. Journal of Environmental Chemical Engineering 12 - (2024)
Enhancing structural resilience by using 3D printed complex polymer reinforcement for high damage tolerant structures by Singh H., Ambekar R.S., Das D., Danam V.A., Katiyar N.K., Kanti Das B., Tiwary C.S., Bhattacharya J. Construction and Building Materials 425 - (2024)
Co-pyrolysis of waste wood and plastic to produce quasi graphitic carbon: enhanced biochar properties for metal coatings through safe sequestration and green technology by Verma A., Banik D., Tiwary C.S., Bhattacharya J. Carbon Trends 15 - (2024)
Drop-Weight Impact Resistance of 3D-Printed Complex Zeolite-Inspired Structures by Ambekar R.S., Oliveira E.F., Pugazhenthi P., Singh S., Mahapatra D.R., Galvao D.S., Tiwary C.S. Advanced Engineering Materials - (2024)
Giant Stark effect assisted radio frequency energy harvesting using atomically thin earth-abundant iron sulphide (FeS2) by Karthik R., Singh A.K., Das S., Sarkar S., Kundu T.K., Kar S., Sreeram P.R., Tiwary C.S. Journal of Materials Chemistry A - (2024)
Highly Sensitive Pyroelectric Detector Using Atomically Thin Nanoscale Silicon Ditelluride by R K., R S. P., Singh A. K., Anantharaman M. R., S. A., Sarkar S. , Kundu T. K., Tiwary C. S. ACS Applied Nano Materials 6 10168-10177 (2023)
Anomalous indirect carrier relaxation in direct band gap atomically thin gallium telluride by Karmakar M., Kumbhakar P., Singha T., Tiwary C.S., Chanda D., Datta P.K. Physical Review B 107 - (2023)
Two-Dimensional Multicomponent Quasicrystal as Bifunctional Electrocatalysts for Alkaline Oxygen and Hydrogen Evolution Reactions by Mishra S.S., Kumbhakar P., Nellaiappan S., Katiyar N.K., Tromer R., Woellner C.F., Galvao D.S., Tiwary C.S., Ghosh C., Dasgupta A., Biswas K. Energy Technology 11 - (2023)
Dimensionality effects of g-C3N4 from wettability to solar light assisted self-cleaning and electrocatalytic oxygen evolution reaction by Kuila S. K., Guchhait S. K., Pradhan D. , Kumbhakar P. , Chandra A. , Tiwary C. S., Kundu T. K. Chemosphere 333 1-11 (2023)
3D printing of tough nature inspired hierarchical architecture using chicken bone and eggshell biowaste for biomedical applications by Das M., Jana A. , Dixit A. , Mishra R. , Maity S. , Karthik R. , S. , P. , Panda S. K., A. , P. , Tiwary C. S. Ceramics International 49 29274-29287 (2023)
Unleashing Enhanced Compressive Strength: 3D Printed Octopus-Inspired Suction Cups Using Topological Engineering by Dixit A., Das M. , Singh H. , Panda S. K., Pugno N. M., Katiyar N. K., Tiwary C. S. ACS Applied Polymer Materials 5 9236-9244 (2023)
Low bandgap high entropy alloy for visible light-assisted photocatalytic degradation of pharmaceutically active compounds: Performance assessment and mechanistic insights by Das S., Sanjay M. , Gautam A. R., Behera R. , Tiwary C. S., Chowdhury S. Journal of Environmental Management 342 118081- (2023)
Sustainable Piezoelectric Energy Harvesting Using 3D Printing with Chicken Bone Extract by M., S. , A. , A. , Panda S. K., D. , Tiwary C. S. ACS Sustainable Chemistry & Engineering 11 14308-14316 (2023)
Magnetically separable MnFeCoNiCu-based high entropy alloy nanoparticles for photocatalytic oxidation of antibiotic cocktails in different aqueous matrices by Das S., Sanjay M. , Kumar S. , Sarkar S. , Tiwary C. S., Chowdhury S. Chemical Engineering Journal 476 146719- (2023)
Comprehensive excited state carrier dynamics of 2D selenium: One-photon and multi-photon absorption regimes by Tiwary C. S., Datta P. K., Singha T. , Prodhan S. , Chauhan K. K., Karmakar M. , Maity N. , Nadarajan R. , Kumbhakar P. , Singh A. K., Shaijumon M. M. Applied Physics Letters 123 - (2023)
Utilization of DNA and 2D metal oxide interaction for an optical biosensor by Kumbhakar P., Das Jana I. , Basu S. , Mandal S. , Banerjee S. , Roy S. , Gowda C. , Chakraborty A. , Pramanik A. , Lahiri P. , Lahiri B. , Chandra A. , Kumbhakar P. , Mondal A. , Maiti P. , Tiwary C. S. RCS Phys. Chem. Chem. Phys - (2023)
Utilization of laterite ore as an oxygen carrier in chemical looping reforming of methane for syngas production by Das S., Biswas A., Bhattacharya J., Tiwary C.S., Paliwal M. International Journal of Hydrogen Energy - (2023)
Utilization of two-dimensional multicomponent Quasicrystal for NO2 gas detection by Mishra S.S., Kumar S., Kumbhakar P., Katiyar N.K., Tromer R., Woellner C.F., Galvao D.S., Tiwary C.S., Kumar M., Biswas K. Materials Chemistry and Physics 298 - (2023)
Controlled directionality in 3D printing of graphite-reinforced polymer composite with enhanced mechanical properties by Das M., Mishra R., Das P., Kashyap S.K., Panda S.K., Mitra R., Owuor P.S., Arora A., Tiwary C.S. Composites Science and Technology 235 109955- (2023)
Synthesis of atomically thin yellow pearl: An impetus for nonlinear optical effect assisted light scattering application by Mandal N., Pramanik A., Dey A., Kumbhakar P., Kochat V., Gautam A.R.S., Glavin N., Roy A.K., Ajayan P.M., Tiwary C.S. Optical Materials 135 - (2023)
Effect of particle size on additive manufacturing of complex architecture of silicon carbide by Jana A., Das M., Tiwari S., Basha S.S., Gautam A.R.S., Panda S.K., Mitra R., Kumar S., Devasia R., Tiwary C.S. Ceramics International 49 17396-17404 (2023)
Microstructure design in Bi-Ga-Te system using a combination of thermodynamic calculations and experiments for potential thermoelectric material by Pal V., Kumar B., Paek M.-K., Tiwary C.S., Paliwal M. Materials Chemistry and Physics 297 - (2023)
Nanocomposites of Quasicrystal Nanosheets and MoS2 Nanoflakes for NO2 Gas Sensors by Kumar S., Chaurasiya R., Mishra S.S., Kumbhakar P., Meng G., Tiwary C.S., Biswas K., Kumar M. ACS Applied Nano Materials - (2023)
Energy Harvesting Using High-Strength and Flexible 3D-Printed Cellulose/Hexagonal Boron Nitride Nanosheet Composites by Jayakumar A., Ambekar R. S., Mahapatra P. L., Singh A. K., Kundu T. K., Pr S. , Nair R. R., Tiwary C. S. ACS Applied Nano Materials 6 14278-14288 (2023)
Energy harvesting using two-dimensional (2D) d-silicates from abundant natural minerals by Mahapatra P.L., Singh A.K., Tromer R., Karthik R., Ambresha M., Costin G., Lahiri B., Kundu T.K., Ajayan P.M., Altman E.I., Galvao D.S., Tiwary C.S. Journal of Materials Chemistry C 11 2098-2106 (2023)
Spontaneous hydrogen production using gadolinium telluride by Kumbhakar P., Parui A., Dhakar S., Paliwal M., Behera R., Gautam A.R.S., Roy S., Ajayan P.M., Sharma S., Singh A.K., Tiwary C.S. iScience 26 - (2023)
Energy harvesting using two-dimensional magnesiochromite (MgCr2O4) by Mahapatra P. L., Singh A. K., Tromer R. , Kumbhakar P. , Sinha S. K., Lahiri B. , Kundu T. K., Galvao D. S., Tiwary C. S. Materials Today Nano 23 1-13 (2023)
An efficient transition metal chalcogenide sensor for monitoring respiratory alkalosis by Kumbhakar P., Sha M.S., Tiwary C.S., Muthalif A.G.A., Al-maadeed S., Sadasivuni K.K. 3 Biotech 13 - (2023)
Prospective applications of two-dimensional materials beyond laboratory frontiers: A review by Kumbhakar P., Jayan J.S., Sreedevi Madhavikutty A., Sreeram P.R., Saritha A., Ito T., Tiwary C.S. iScience 26 - (2023)
Engineering Materials at the Atomic Scale for Energy, Environment, and Healthcare Applications by Tiwary C.S. Microscopy and microanalysis : the official journal of Microscopy Society of America, Microbeam Analysis Society, Microscopical Society of Canada 29 20- (2023)
Iron-cobalt-nickel-copper-zinc (FeCoNiCuZn) high entropy alloy as positive electrode for high specific capacitance supercapacitor by Mohanty G., Gowda C. , Gakhad P. , Das S. , Sanjay M. , Chowdhury S. , Biswas K. , Singh A. , Tiwary C. S. Electrpchimica Acta 470 143272- (2023)
Stable nanocrystalline structure attainment and strength enhancement of Cu base alloy using bi-modal distributed tungsten dispersoids by Roy D., Pal S., Tiwary C.S., Gupta A.K., Babu P.N., Mitra R. Philosophical Magazine 102 189-209 (2022)
Real-time quality monitoring and organic pollutants degradation of water using atomically thin Magnesiochromite by Mahapatra P.L., Kumbhakar P., Lahiri B., Sinha S.K., Tiwary C.S. Materials Research Bulletin 146 - (2022)
Two-dimensional cobalt telluride as a piezo-tribogenerator by Negedu S.D., Tromer R., Gowda C.C., Woellner C.F., Olu F.E., Roy A.K., Pandey P., Galvao D.S., Ajayan P.M., Kumbhakar P., Tiwary C.S. Nanoscale 14 7788-7797 (2022)
Anaerobe Syntrophic Co-culture-Mediated Green Synthesis of Ultrathin Niobium Carbide (NbC) Sheets for Flexoelectricity Generation by Mahle R., Mahapatra P.L., Singh A.K., Kumbhakar P., Paliwal M., Tiwary C.S., Banerjee R. ACS Sustainable Chemistry and Engineering 10 13650-13660 (2022)
Understanding the electrocatalysis OER and ORR activity of ultrathin spinel Mn3O4 by Chowde Gowda C., Mathur A., Parui A., Kumbhakar P., Pandey P., Sharma S., Chandra A., Singh A.K., Halder A., Tiwary C.S. Journal of Industrial and Engineering Chemistry 113 153-160 (2022)
Understanding the mechanics of complex topology of the 3D printed Anthill architecture by Kushwaha B., Kumar A., Ambekar R.S., Arya V., Negedu S.D., Bakshi D., Olu F.E., Sastri Ayyagari R., Pal V., Sadasivuni K.K., Pugno N.M., Bakli C., Tiwary C.S. Oxford Open Materials Science 2 - (2022)
Energy Harvesting from Atomically Thin Co2Te3 by Negedu S.D., Karstev A., Palit M., Pandey P., Olu F.E., Roy A.K., Das G.P., Ajayan P.M., Kumbhakar P., Tiwary C.S. Journal of Physical Chemistry C 126 12545-12553 (2022)
Energy Harvesting Using Cotton Fabric Embedded with 2D Hexagonal Boron Nitride by Mahapatra P.L., Singh A.K., Lahiri B., Kundu T.K., Roy A.K., Kumbhakar P., Tiwary C.S. ACS Applied Materials and Interfaces 14 30343-30351 (2022)
Vacancy-Mediated Anomalous Emission Characteristics of Size-Confined Semiconducting CoTe2 by Das S., Pal S., Kumbhakar P., Tromer R.M., Negedu S.D., Galvao D.S., Das S., Tiwary C.S., Ray S.K. ACS Applied Materials and Interfaces 14 53139-53149 (2022)
Enhancement in magnetization of two-dimensional cobalt telluride and its magnetic field-assisted photocatalytic activity by Negedu S.D., Tromer R., Siddique S., Woellner C.F., Olu F.E., Palit M., Roy A.K., Pandey P., Galvao D.S., Kumbhakar P., Tiwary C.S. Applied Physics A: Materials Science and Processing 128 - (2022)
Synthesis and Characterization of Biotene: A New 2D Natural Oxide From Biotite by Mahapatra P.L., Tromer R., Pandey P., Costin G., Lahiri B., Chattopadhyay K., Ajayan P.M., Roy A.K., Galvao D.S., Kumbhakar P., Tiwary C.S. Small 18 - (2022)
Growth of highly crystalline ultrathin two-dimensional selenene by Sarma P.V., Nadarajan R., Kumar R., Patinharayil R.M., Biju N., Narayanan S., Gao G., Tiwary C.S., Thalakulam M., Kini R.N., Singh A.K., Ajayan P.M., Shaijumon M.M. 2D Materials 9 - (2022)
Development of a self-consistent thermodynamic database for Ga-In-Te system and experimental validation: a potential system for thermoelectric application by Pal V., Kumar B., Choi J., Kumar B., Tiwary C.S., Paliwal M., Paek M.-K. Journal of Materials Science 57 18178-18194 (2022)
Heat transfer enhancement using CNT-coated needle electrodes in corona wind discharge system by Vibin Antony P., Joseph M., Ozden S., Tiwary C.S., Sajith V. European Physical Journal Plus 137 - (2022)
Photon and vibration synergism on planar defects induced 2D-graphitic carbon nitride for ultrafast remediation of dyes and antibiotic ampicillin by Kuila S. K., Kumbhakar P. , Tiwary C. S., Kundu T. K. Journal of Materials Science - (2022)
Schwarzites and schwarzynes based load-bear resistant 3D printed hierarchical structures by Oliveira E.F., Ambekar R.S., Galvao D.S., Tiwary C.S. Additive Manufacturing 60 - (2022)
Chemisorption of gadolinium ions on 2D-graphitic carbon nitride nanosheet for enhanced solid-state supercapacitor performance by Kuila S. K., Ghorai A. , Midya A. , Tiwary C. S., Kundu T. K. Chemical Physics Letters 796 - (2022)
Chemisorption of gadolinium ions on 2D-graphitic carbon nitride nanosheet for enhanced solid-state supercapacitor performance by Kumar Kuila S., Ghorai A., Midya A., Sekhar Tiwary C., Kumar Kundu T. Chemical Physics Letters 796 - (2022)
Highly Sensitive and Selective Triethylamine Sensing through High-Entropy Alloy (Ti-Zr-Cr-V-Ni) Nanoparticle-Induced Fermi Energy Control of MoS2Nanosheets by Jishnu V., Mishra S.S., Mb K.U., Thomas S.P., Tiwary C.S., Biswas K., Kamble V.B. ACS Applied Materials and Interfaces 14 13653-13664 (2022)
3D Printed Materials in Water Treatment Applications by Ghosal P., Gupta B., Ambekar R.S., Rahman M.M., Ajayan P.M., Aich N., Gupta A.K., Tiwary C.S. Advanced Sustainable Systems 6 - (2022)
Hydrogen production using chemical looping technology: A review with emphasis on H2 yield of various oxygen carriers by Das S., Biswas A., Tiwary C.S., Paliwal M. International Journal of Hydrogen Energy 47 28322-28352 (2022)
Identification of aggregated 2D cobalt tellurides using a spatial self-phase modulation technique by Pramanik A., Kumbhakar P., Negedu S.D., Tiwary C.S. Optics Letters 47 4965-4968 (2022)
Low temperature CVD growth of WSe2 enabled by moisture-assisted defects in the precursor powder by Sassi L.M., Krishnamoorthy A., Hachtel J.A., Susarla S., Apte A., Castro-Pardo S., Ajnsztajn A., Vajtai R., Vashishta P., Tiwary C.S., Puthirath A.B., Ajayan P.M. 2D Materials 9 - (2022)
Management of hard tissue abnormalities and digital orthopaedics using additive manufacturing techniques by Das M., Alam R., Das M., Biswal B., Samal B.P., Patnaik A., Panda S.K., Owuor P.S., Patra P., Tiwary C.S. Oxford Open Materials Science 2 - (2022)
Atomically thin gallium telluride nanosheets: A new 2D material for efficient broadband nonlinear optical devices by Singha T., Karmakar M., Kumbhakar P., Tiwary C.S., Datta P.K. Applied Physics Letters 120 - (2022)
Mechanical properties of 3D-printed pentadiamond by Felix L.C., Ambekar R.S., Woellner C.F., Kushwaha B., Pal V., Tiwary C.S., Galvao D.S. Journal of Physics D: Applied Physics 55 - (2022)
Mechanical response of pentadiamond: A DFT and molecular dynamics study by Felix L.C., Tromer R.M., Woellner C.F., Tiwary C.S., Galvao D.S. Physica B: Condensed Matter 629 - (2022)
Rain Energy Harvesting Using Atomically Thin Gadolinium Telluride Decorated 3D Printed Nanogenerator by Kumbhakar P., Parui A., Ambekar R.S., Mukherjee M., Siddique S., Pugno N.M., Singh A.K., Tiwary C.S. Advanced Sustainable Systems 6 - (2022)
Thermodynamic modelling of the ternary Bi-Ga-Te system for potential application in thermoelectric materials by Kumar B., Tiwary C.S., Paek M.-K., Paliwal M. Calphad: Computer Coupling of Phase Diagrams and Thermochemistry 74 - (2021)
Thermodynamic optimization of the ternary Ga-Sn-Te system using modified Quasichemical model by Kumar B., Paliwal M., Tiwary C.S., Paek M.-K. Metals 11 - (2021)
Lanthanum ions decorated 2-dimensional g-C3N4 for ciprofloxacin photodegradation by Kuila S.K., Gorai D.K., Gupta B., Gupta A.K., Tiwary C.S., Kundu T.K. Chemosphere 268 128780- (2021)
Lanthanum ions decorated 2-dimensional g-C3N4 for ciprofloxacin photodegradation by Kuila S. K., Gorai D. ., Gupta B. , Gupta A. K., Tiwary C. S., Kundu T. K. Chemosphere 268 128780- (2021)
Three-dimensional printing of complex graphite structures by Sajadi S.M., Enayat S., Vásárhelyi L., Alabastri A., Lou M., Sassi L.M., Kutana A., Bhowmick S., Durante C., Kukovecz Á., Puthirath A.B., Kónya Z., Vajtai R., Boul P., Tiwary C.S., Rahman M.M., Ajayan P.M. Carbon 181 260-269 (2021)
Spontaneous Time-Reversal Symmetry Breaking at Individual Grain Boundaries in Graphene by Hsieh K., Kochat V., Biswas T., Tiwary C.S., Mishra A., Ramalingam G., Jayaraman A., Chattopadhyay K., Raghavan S., Jain M., Ghosh A. Physical Review Letters 126 - (2021)
Conducting Graphene Synthesis from Electronic Waste by Bajpai A., Kumbhakar P., Tiwary C.S., Biswas K. ACS Sustainable Chemistry and Engineering - (2021)
Spontaneous Time-Reversal Symmetry Breaking at Individual Grain Boundaries in Graphene by Hseih K., Kochat V. , Biswas T. , Tiwary C. S., Mishra A. , Ramalingam G. , Jayaraman A. , Chattopadhyay K. , Raghavan S. , Jain M. , Ghosh A. Physical Review Letters 126 206803- (2021)
Confinement Aided Simultanous Water Cleaning and Energy Harvesting Using Atomically Thin Wurtzite (Wurtzene) by Kumbhakar P., Mukherjee M., Pramanik A., Karmakar S., Singh A.K., Tiwary C.S., Kumbhakar P. Advanced Sustainable Systems 5 - (2021)
Topologically engineered 3D printed architectures with superior mechanical strength by Ambekar R.S., Kushwaha B., Sharma P., Bosia F., Fraldi M., Pugno N.M., Tiwary C.S. Materials Today 48 72-94 (2021)
A study of microbially fabricated bio-conjugated quantum dots for pico-molar sensing of H2O2and glucose by Mahle R., Mandal D., Kumbhakar P., Chandra A., Tiwary C.S., Banerjee R. Biomaterials Science 9 157-166 (2021)
A multivariate modeling and experimental realization of photocatalytic system of engineered S C3N4/ZnO hybrid for ciprofloxacin removal: Influencing factors and degradation pathways by Gupta B., Gupta A.K., Tiwary C.S., Ghosal P.S. Environmental Research 196 110390- (2021)
Convert waste petroleum coke to multi-heteroatom self-doped graphene and its application as supercapacitors by Mandal D., Mahapatra P.L., Kumari R., Kumbhakar P., Biswas A., Lahiri B., Chandra A., Tiwary C.S. Emergent Materials 4 531-544 (2021)
A multivariate modeling and experimental realization of photocatalytic system of engineered S C3N4/ZnO hybrid for ciprofloxacin removal: Influencing factors and degradation pathways by Gupta B., Gupta A.K., Tiwary C.S., Ghosal P.S. Environmental Research 196 - (2021)
Copper Nanoparticle-Graphene Composite-Based Transparent Surface Coating with Antiviral Activity against Influenza Virus by Das Jana I., Kumbhakar P., Banerjee S., Gowda C.C., Kedia N., Kuila S.K., Banerjee S., Das N.C., Das A.K., Manna I., Tiwary C.S., Mondal A. ACS Applied Nano Materials 4 352-362 (2021)
Atomic Scale Structure Inspired 3D Printed Porous Structures with Tunable Mechanical Response by Ambekar R. S., Mohanty I. , Kishore S. , Das R. , Pal V. , Kushwaha B. , Roy A. K., Kar S. K., Tiwary C. S. Advance Engineering Materials - (2021)
Atomic Scale Structure Inspired 3D-Printed Porous Structures with Tunable Mechanical Response by Ambekar R.S., Mohanty I., Kishore S., Das R., Pal V., Kushwaha B., Roy A.K., Kumar Kar S., Tiwary C.S. Advanced Engineering Materials - (2021)
Reversible temperature-dependent photoluminescence in semiconductor quantum dots for the development of a smartphone-based optical thermometer by Kumbhakar P., Roy Karmakar A., Das G.P., Chakraborty J., Tiwary C.S., Kumbhakar P. Nanoscale 13 2946-2954 (2021)
Review of strategies toward the development of alloy two-dimensional (2D) transition metal dichalcogenides by Singh A.K., Kumbhakar P., Krishnamoorthy A., Nakano A., Sadasivuni K.K., Vashishta P., Roy A.K., Kochat V., Tiwary C.S. iScience 24 - (2021)
Low-cost high entropy alloy (HEA) for high-efficiency oxygen evolution reaction (OER) by Sharma L., Katiyar N.K., Parui A., Das R., Kumar R., Tiwary C.S., Singh A.K., Halder A., Biswas K. Nano Research - (2021)
Roadblocks faced by graphene in replacing graphite in large-scale applications by Owuor P.S., Khan A., Leon C.L.Y., Ozden S., Priestley R., Arnold C., Chopra N., Tiwary C.S. Oxford Open Materials Science 1 - (2021)
Current advances in bio-fabricated quantum dots emphasising the study of mechanisms to diversify their catalytic and biomedical applications by Mahle R., Kumbhakar P., Nayar D., Narayanan T.N., Kumar Sadasivuni K., Tiwary C.S., Banerjee R. Dalton Transactions 50 14062-14080 (2021)
Damage-tolerant 3D-printed ceramics via conformal coating by Sajadi S.M., Vásárhelyi L., Mousavi R., Rahmati A.H., Kónya Z., Kukovecz Á., Arif T., Filleter T., Vajtai R., Boul P., Pang Z., Li T., Tiwary C.S., Rahman M.M., Ajayan P.M. Science Advances 7 - (2021)
Ultrahigh transverse rupture strength in tungsten-based nanocomposites with minimal lattice misfit and dual microstructure by Chakravarty D., Laxman N., Jayasree R., Mane R.B., Mathiazhagan S., Srinivas P.V.V., Das R., Nagini M., Eizadjou M., Venkatesh L., Ravi N., Mahapatra D.R., Vijay R., Ringer S.P., Tiwary C.S. International Journal of Refractory Metals and Hard Materials 95 - (2021)
Deformation resilient cement structures using 3D-printed molds by Sajadi S.M., Tiwary C.S., Rahmati A.H., Eichmann S.L., Thaemlitz C.J., Salpekar D., Puthirath A.B., Boul P.J., Rahman M.M., Meiyazhagan A., Ajayan P.M. iScience 24 - (2021)
Improved mechanical and wear properties of Cu-Ga-In ternary alloys through liquid reinforcement by Das R., Pal V., Kumar B., Roy A.K., Paliwal M., Palit M., Paek M.-K., Tiwary C.S. Materials Today Communications 27 - (2021)
Five decades of research on the development of eutectic as engineering materials by Tiwary C.S., Pandey P., Sarkar S., Das R., Samal S., Biswas K., Chattopadhyay K. Progress in Materials Science - (2021)
Scalable Synthesis of Atomically Thin Gallium Telluride Nanosheets for Supercapacitor Applications by Siddique S., Gowda C.C., Tromer R., Demiss S., Gautam A.R.S., Femi O.E., Kumbhakar P., Galvao D.S., Chandra A., Tiwary C.S. ACS Applied Nano Materials 4 4829-4838 (2021)
Mechanical and Acoustic Behavior of 3D-Printed Hierarchical Mathematical Fractal Menger Sponge by Kushwaha B., Dwivedi K., Ambekar R.S., Pal V., Jena D.P., Mahapatra D.R., Tiwary C.S. Advanced Engineering Materials 23 - (2021)
Flexure resistant 3D printed zeolite-inspired structures by Ambekar R.S., Oliveira E.F., Kushwaha B., Pal V., Ajayan P.M., Roy A.K., Galvao D.S., Tiwary C.S. Additive Manufacturing 47 - (2021)
2D nanomaterials in 3D/4D-printed biomedical devices by Das M., Ambekar R.S., Panda S.K., Chakraborty S., Tiwary C.S. Journal of Materials Research 36 4024-4050 (2021)
Electrooxidation of Hydrazine Utilizing High-Entropy Alloys: Assisting the Oxygen Evolution Reaction at the Thermodynamic Voltage by Katiyar N.K., Dhakar S., Parui A., Gakhad P., Singh A.K., Biswas K., Tiwary C.S., Sharma S. ACS Catalysis 11 14000-14007 (2021)
Synthesis, physico-mechanical properties, material processing, and math models of novel superior materials doped flake of carbon and colloid flake of carbon by K rg z M.S., Galdino A.G.D.S., Kinuthia J., Khitab A., Ul Hassan M.I., Khatib J., El Naggar H., Thomas C., Mirza J., Kenai S., Nguyen T.A., Nehdi M., Syarif M., Ashteyat A., Gobinath R., Soliman A., Tagbor T.A., Kumbhalkar M.A., Bheel N., Tiwary C.S. Journal of Materials Research and Technology 15 4993-5009 (2021)
Development and assessment of cement and concrete made of the burning of quinary by-product by Syarif M., K rg z M.S., Galdino A.G.D.S., Naggar M.H.E., Mirza J., Khatib J., Kenai S., Nehdi M., Kinuthia J., Khitab A., Thomas C., Gobinath R., Hassan M.I.U., Wu Y.K., Ashteyat A., Soliman A., Muthusamy K., Janardhanan T., Tagbor T.A., Nguyen T.A., Bheel N., Kumbhalkar M.A., Tiwary C.S. Journal of Materials Research and Technology 15 3708-3721 (2021)
On the mechanical properties of atomic and 3D printed zeolite-templated carbon nanotube networks by Ambekar R.S., Oliveira E.F., Kushwaha B., Pal V., Machado L.D., Sajadi S.M., Baughman R.H., Ajayan P.M., Roy A.K., Galvao D.S., Tiwary C.S. Additive Manufacturing 37 - (2021)
Development of a schwarzite-based moving bed 3D printed water treatment system for nanoplastic remediation by Gupta B., Ambekar R.S., Tromer R.M., Ghosal P.S., Sinha R., Majumder A., Kumbhakar P., Ajayan P.M., Galvao D.S., Gupta A.K., Tiwary C.S. RSC Advances 11 19788-19796 (2021)
Microstructure and Wear Behaviour of a Novel Fe-Cr-V- C Plasma Transferred Arc Coating by Ranjan A., Kishore K., Pal V., Adhikary M., Kumar A., Tiwary C.S., Paliwal M. JOM 73 4328-4337 (2021)
Development of a schwarzite-based moving bed 3D printed water treatment system for nanoplastic remediation by Gupta B., Ambekar R. S., Tromer R. M., Ghosal P. S., Sinha R. , Majumder A. , Kumbhakar P. , Ajayan P. M., Galvao D. S., Gupta A. K., Tiwary C. S. RSC Advances 11 19788-19796 (2021)
Emerging 2D metal oxides and their applications by Kumbhakar P., Chowde Gowda C., Mahapatra P.L., Mukherjee M., Malviya K.D., Chaker M., Chandra A., Lahiri B., Ajayan P.M., Jariwala D., Singh A., Tiwary C.S. Materials Today 45 142-168 (2021)
Emerging two-dimensional tellurides by Siddique S., Chowde Gowda C., Demiss S., Tromer R., Paul S., Sadasivuni K.K., Olu E.F., Chandra A., Kochat V., Galvão D.S., Kumbhakar P., Mishra R., Ajayan P.M., Sekhar Tiwary C. Materials Today 51 402-426 (2021)
Quantifying instant water cleaning efficiency using zinc oxide decorated complex 3D printed porous architectures by Kumbhakar P., Ambekar R.S., Mahapatra P.L., Sekhar Tiwary C. Journal of Hazardous Materials 418 - (2021)
A.Copper Nanoparticle Graphene Composite-Based Transparent Surface Coating with Antiviral Activity against Influenza Virus by Das I. J., Kumbhakar P. , Banerjee S. , Gowda C. C., Kedia N. , Kuila S. K., Banerjee S. , Das N. C., Das A. K., Manna I. , Tiwary C. S., Mondal A. ACS Appl Nano Mater 4 352-362 (2021)
Advance Optical Properties and Emerging Applications of 2D Materials by Kumbhakar P., Chowde Gowda C., Tiwary C.S. Frontiers in Materials 8 - (2021)
Hierarchical cage-frame type nanostructure of CeO2 for bio sensing applications: From glucose to protein detection by Mandal D., Biswas S., Chowdhury A., De D., Tiwary C.S., Gupta A.N., Singh T., Chandra A. Nanotechnology 32 - (2021)
Bioinspired Aluminum Composite Reinforced with Soft Polymers with Enhanced Strength and Plasticity by Rout A., Gumaste A., Pandey P., Oliveira E.F., Demiss S., Mahesh V.P., Bhatt C., Raphael K., Ayyagari R.S., Autreto P.A.S., Palit M., Olu F., Galvao D.S., Arora A., Tiwary C.S. Advanced Engineering Materials 22 - (2020)
Bioinspired Aluminum Composite Reinforced with Soft Polymers with Enhanced Strength and Plasticity by Tiwary C. S., Rout A. , Gumaste A. , Pandey P. , Oliveria E. F., Mahesh V. P., Bhatt C. , Raphael K. , Autreto P. A., Palit M. , Olu F. , Galvao D. S., Arora A. , Demiss S. Advanced Engineering Materials 22 - (2020)
Ultra-low density three-dimensional nano-silicon carbide architecture with high temperature resistance and mechanical strength by Hart A.H.C., Owuor P.S., Hamel J., Bhowmik S., Asif S.A.S., Gentles A.X., Ozden S., Tsafack T., Keyshar K., Mital R., Hurst J., Vajtai R., Tiwary C.S., Ajayan P.M. Carbon 164 143-149 (2020)
Ultra-low density three-dimensional nano-silicon carbide architecture with high temperature resistance and mechanical strength by Tiwary C. S., Hart A. H., Owuor P. S., Hamel J. , Bhowmik S. , Asif S. S., Gentles A. X., Ozden S. , Tsafack T. , Keyshar K. , Mital R. , Hurst J. , Vajtai R. , Ajayan P. M. Carbon 164 143-149 (2020)
Formic acid and methanol electro-oxidation and counter hydrogen production using nano high entropy catalyst by Katiyar N.K., Nellaiappan S., Kumar R., Malviya K.D., Pradeep K.G., Singh A.K., Sharma S., Tiwary C.S., Biswas K. Materials Today Energy 16 - (2020)
Formic acid and methanol electro-oxidation and counter hydrogen production using nano high entropy catalyst by Tiwary C. S., Katiyar N. K., Nellaiappan S. , Kumar R. , Malviya K. D., P. K., Singh A. K., Sharma S. , Biswas K. Materials Today Energy 16 - (2020)
Forster resonance energy transfer assisted white light generation and luminescence tuning in a colloidal graphene quantum dot-dye system by Pramanik A., Biswas S., Tiwary C.S., Kumbhakar P., Sarkar R., Kumbhakar P. Journal of Colloid and Interface Science 565 326-336 (2020)
Forster resonance energy transfer assisted white light generation and luminescence tuning in a colloidal graphene quantum dot-dye system by Tiwary C. S., Pramanik A. , Biswas S. , Kumbhakar P. , Sarkar R. , Kumbhakar P. Journal of Colloid and Interface Science 565 326-336 (2020)
Scale-Enhanced Magnetism in Exfoliated Atomically Thin Magnetite Sheets by Puthirath A.B., Shirodkar S.N., Gao G., Hernandez F.C.R., Deng L., Dahal R., Apte A., Costin G., Chakingal N., Balan A.P., Sassi L.M., Tiwary C.S., Vajtai R., Chu C.-W., Yakobson B.I., Ajayan P.M. Small 16 - (2020)
Synthesis of bilayer MoS2 nanosheets by green chemistry approach and its application in triboelectric and catalytic energy harvesting by Karmakar S., Sarkar R., Tiwary C.S., Kumbhakar P. Journal of Alloys and Compounds 844 - (2020)
Self-assembly of 0D/2D homostructure for enhanced hydrogen evolution by Tiwary C. S., Zhang J. , Zhu T. , Cui J. , Sun J. , Qin Y. , Shu X. , Zhang Y. , Wu J. , Ajayen P. M., Wu Y. Materialstoday 36 83-90 (2020)
Microstructural evolution and its outcome on the photo induced micro actuation effect and mechanical properties of copper doped Co-Ni-Al FSMA by Bagchi A., Sarkar S., Bysakh S., Tiwary C.S., Hossain M.S., Sarkar S., Mukhopadhyay P.K. Journal of Alloys and Compounds 846 - (2020)
Microstructures and mechanical properties of ternary Ti Si Sn alloys by Tiwary C. S., Paliwal M. , Kashyap S. , Pandey P. , Sarkar S. , Kundu I. , Bhaskar S. , Jung I. , Chattopadhyay K. , Banerjee D. Materials Science and Engineering:A 770 138472- (2020)
Microstructures and mechanical properties of ternary Ti Si Sn alloys by Tiwary C.S., Paliwal M., Kashyap S., Pandey P., Sarkar S., Kundu I., Bhaskar S., Jung I.-H., Chattopadhyay K., Banerjee D. Materials Science and Engineering A 770 - (2020)
Electroreduction of Carbon Dioxide into Selective Hydrocarbons at Low Overpotential Using Isomorphic Atomic Substitution in Copper Oxide by Tiwary C. S., Nellaiappan S. , Kumar R. , S. C., Irusta S. , Hachtel J. A., Idrobo J. , Singh A. K., Sharma S. ACS Sustainable Chemistry & Engineering 8 179-189 (2020)
Shear exfoliation synthesis of large-scale graphene-reinforced nanofibers by Joyner J., Javvaji B., Owuor P.S., Raghavan P., Salpekar D., Tsafack T., Bhowmick S., Vajtai R., Mahapatra D.R., Tiwary C.S., Ajayan P.M. Carbon 166 405-413 (2020)
Shear exfoliation Synthesis of large-scale graphene-reinforced nanofibers by Tiwary C. S., Joyner J. , Javvaji B. , Owuor P. S., Raghavan P. , Salpekar D. , Bhowmick S. , Vajtai R. , Mahapatra D. R., Ajayan P. M. Carbon 166 405-413 (2020)
Development of a copper-graphene nanocomposite based transparent coating with antiviral activity against influenza virus by Das Jana I., Kumbhakar P. , Banerjee S. , Chowde Gowda C. , Kedia N. , Kuila S. K., Banerjee S. , Das N. C., Das A. K., Manna I. , Tiwary C. S., Mondal A. BioRxiv - (2020)
Enhancing the oxygen evolution activity of nitrogen-doped graphitic carbon shell-embedded nickel/nickel oxide nanoparticles by surface dissolution by Madan C., Tiwary C.S., Halder A. Materials Chemistry Frontiers 4 3267-3279 (2020)
Graphene Supported MoS2 Structures with High Defect Density for an Efficient HER Electrocatalysts by Joyner J., Oliveira E.F., Yamaguchi H., Kato K., Vinod S., Galvao D.S., Salpekar D., Roy S., Martinez U., Tiwary C.S., Ozden S., Ajayan P.M. ACS Applied Materials and Interfaces 12 12629-12638 (2020)
Graphene Supported MoS2 Structures with High Defect Density for an Efficient HER Electrocatalysts by Tiwary C. S., Joyner J. , Oliveira E. F., Yamaguchi H. , Kato K. , Vinod S. , Galvao D. S., Salpekar D. , Roy S. , Martinez U. , Ozden S. , Ajayan P. M. ACS APLLIED MATERIALS AND INTERFACES 12 12629-12638 (2020)
Green Route for Beneficiation of Metallic Materials from Electronic Waste for Selective Reduction of CO2 by Sharma N., Bajpai A., Yadav P.K., Nellaiappan S., Sharma S., Tiwary C.S., Biswas K. ACS Sustainable Chemistry and Engineering 8 12142-12150 (2020)
MoS2 quantum dots decorated ultrathin NiO nanosheets for overall water splitting by Tiwary C. S., Zhan G. , Zhang J. , Wang Y. , Yu C. , Wu J. , Cui J. , Qin Y. , Zheng H. , Yan J. , Zhang Y. , Wu Y. Journal of Colloid and Interface Science 566 411-418 (2020)
Multi-component (Ag Au Cu Pd Pt) alloy nanoparticle-decorated p-type 2D-molybdenum disulfide (MoS2) for enhanced hydrogen sensing by Tiwary C. S., Urs K. M., Katiyar N. K., Kumar R. , Biswas K. , Singh A. K., Kamble V. NanoScale 12 11830-11841 (2020)
Multi-component (Ag-Au-Cu-Pd-Pt) alloy nanoparticle-decorated p-type 2D-molybdenum disulfide (MoS2) for enhanced hydrogen sensing by Urs K.M.B., Katiyar N.K., Kumar R., Biswas K., Singh A.K., Tiwary C.S., Kamble V. Nanoscale 12 11830-11841 (2020)
Hexagonal boron nitride-carbon nanotube hybrid network structure for enhanced thermal, mechanical and electrical properties of polyimide nanocomposites by Tiwary C. S., Park O. K., Owuor P. S., Jaques Y. M., Galvao D. S., Kim N. H., Lee J. H., Ajayan P. M. Composites Science and Technology 188 107977- (2020)
Hexagonal boron nitride-carbon nanotube hybrid network structure for enhanced thermal, mechanical and electrical properties of polyimide nanocomposites by Park O.-K., Owuor P.S., Jaques Y.M., Galvao D.S., Kim N.H., Lee J.H., Tiwary C.S., Ajayan P.M. Composites Science and Technology 188 - (2020)
Hierarchical cage-frame type nanostructure of CeO2 for bio sensing applications: From glucose to protein detection by Mandal D., Biswas S. , Chowdhury A. , De D. , Tiwary C. S., Gupta A. N., Singh T. , Chandra A. Nanotechnology - (2020)
High-Entropy Alloys as Catalysts for the CO2 and CO Reduction Reactions: Experimental Realization by Nellaiappan S., Katiyar N.K., Kumar R., Parui A., Malviya K.D., Pradeep K.G., Singh A.K., Sharma S., Tiwary C.S., Biswas K. ACS Catalysis 10 3658-3663 (2020)
High-Entropy Alloys as Catalysts for the CO2 and CO Reduction Reactions: Experimental Realization by Tiwary C. S., Nellaiappan S. , Katiyar N. K., Kumar R. , Pauri A. , Malviya K. D., Pradeep K. , Singh A. K., Sharma S. , Biswas K. ACS Catalysis 10 3658-3663 (2020)
Nature inspired solid liquid phase amphibious adhesive by Tiwary C. S., Chipara A. C., Brunetto G. , Ozden S. , Haspel H. , Kumbhakar P. , Kukovecz . , Kónya Z. , Vajtai R. , Chipara M. , Galvao D. S., Ajayan P. M. Soft Matter 16 5854-5860 (2020)
Nature inspired solid-liquid phase amphibious adhesive by Chipara A.C., Brunetto G., Ozden S., Haspel H., Kumbhakar P., Kukovecz Á., Kónya Z., Vajtai R., Chipara M., Galvao D.S., Tiwary C.S., Ajayan P.M. Soft Matter 16 5854-5860 (2020)
Hydrogen evolution at the in-situ MoO 3 /MoS 2 heterojunctions created by non-thermal O 2 plasma treatment by Tiwary C. S., Sharma L. , Botari T. , Halder A. ACS Applied Energy Materials 3 5333-5342 (2020)
Extraction of Two-Dimensional Aluminum Alloys from Decagonal Quasicrystals by Yadav T.P., Woellner C.F., Sharifi T., Sinha S.K., Qu L.-L., Apte A., Mukhopadhyay N.K., Srivastava O.N., Vajtai R., Galvão D.S., Tiwary C.S., Ajayan P.M. ACS Nano 14 7435-7443 (2020)
Extraction of Two-Dimensional Aluminum Alloys from Decagonal Quasicrystals by Tiwary C. S., Yadav T. P., Woellner C. F., Sharifi T. , Sinha S. K., Qu L. , Galvão D. S., Ajayan P. M., Apte A. , Mukhopadhyay N. , Vajtai R. ACS Nano 7435-7443 (2020)
Photocatalytic dye degradation under sunlight irradiation using cerium ion adsorbed two-dimensional graphitic carbon nitride by Kuila S. K., Sarkar R. , Kumbhakar P. , Kumbhakar P. , Tiwary C. S., Kundu T. K. Journal of Environmental Chemical Engineering 8 1-11 (2020)
Photocatalytic dye degradation under sunlight irradiation using cerium ion adsorbed two-dimensional graphitic carbon nitride by Kuila S.K., Sarkar R., Kumbhakar P., Kumbhakar P., Tiwary C.S., Kundu T.K. Journal of Environmental Chemical Engineering 8 - (2020)
Photo-induced degradation of bio-toxic Ciprofloxacin using the porous 3D hybrid architecture of an atomically thin sulfur-doped g-C3N4/ZnO nanosheet by Gupta B., Gupta A.K., Ghosal P.S., Tiwary C.S. Environmental Research 183 - (2020)
Photo-induced degradation of bio-toxic Ciprofloxacin using the porous 3D hybrid architecture of an atomically thin sulfur-doped g-C3N4/ZnO nanosheet by Tiwary C. S., Gupta B. , Gupta A. K., Ghosal P. S. Environmental Research 183 109154- (2020)
Photo-induced degradation of bio-toxic Ciprofloxacin using the porous 3D hybrid architecture of an atomically thin sulfur-doped g-C3N4/ZnO nanosheet by Gupta B., Gupta A. K., Ghosal P. S., Tiwary C. S. Environmental Research 183 1-9 (2020)
2D Hexagonal Boron Nitride-Coated Cotton Fabric with Self-Extinguishing Property by Ambekar R.S., Deshmukh A., Suárez-Villagrán M.Y., Das R., Pal V., Dey S., Miller J.H., Machado L.D., Kumbhakar P., Tiwary C.S. ACS Applied Materials and Interfaces 12 45274-45280 (2020)
Cryomilling as environmentally friendly synthesis route to prepare nanomaterials by Katiyar N.K., Biswas K., Tiwary C.S. International Materials Reviews - (2020)
Waste Animal Bone as a Novel Layered Heterogeneous Catalyst for the Transesterification of Biodiesel by Chingakham C., Tiwary C., Sajith V. Catalysis Letters 149 1100-1110 (2019)
Graphene as an electrochemical transfer layer by Sharifi T., Xie Y., Zhang X., Barzegar H.R., Lei J., Coulter G., Sun S., Tiwary C., Zettl A., Yakobson B., Ajayan P.M. Carbon 141 266-273 (2019)
Interface and defect engineering of hybrid nanostructures toward an efficient HER catalyst by Ozden S., Bawari S., Vinod S., Martinez U., Susarla S., Narvaez C., Joyner J., Tiwary C.S., Narayanan T.N., Ajayan P.M. Nanoscale 11 12489-12496 (2019)
Optical control of non-equilibrium phonon dynamics by Krishnamoorthy A., Lin M. , Zhang X. , Weninger C. , Ma R. , Britz A. , Tiwary C. S., Kochat V. , Apte A. , Yang J. , Park S. , Li R. , Shen X. , Wang X. , Kalia R. , Nakano A. , Shimojo F. , Fritz D. , Bergmann U. , Ajayan P. , Vashishta P. Nano Letters 19 4981-4989 (2019)
Atomically locked interfaces of metal (Aluminum) and polymer (Polypropylene) using mechanical friction by Rout A., Pandey P., Oliveira E.F., da Silva Autreto P.A., Gumaste A., Singh A., GalvÃ£o D.S., Arora A., Tiwary C.S. Polymer 169 148-153 (2019)
Mixing the immiscible through high-velocity mechanical impacts: an experimental and theoretical study by Tiwary C. S., Malviya K. D., Oliveira E. F., Autreto P. A., Ajayan P. M., Galvão D. S., Chattopadhyay K. Journal of Physics D: Applied Physics 52 - (2019)
Mixing the immiscible through high-velocity mechanical impacts: An experimental and theoretical study by Malviya K.D., Oliveira E.F., Autreto P.A.S., Ajayan P.M., GalvÃ£o D.S., Tiwary C.S., Chattopadhyay K. Journal of Physics D: Applied Physics 52 - (2019)
Etching of transition metal dichalcogenide monolayers into nanoribbon arrays by Wang Z., Zhang X., Hachtel J.A., Apte A., Tiwary C.S., Vajtai R., Idrobo J.C., Ozturk R., Ajayan P. Nanoscale Horizons 4 689-696 (2019)
Efect of Mn Addition on the Mechanical Properties of Al 12.6Si Alloy: Role of Al15(MnFe)3Si2 Intermetallic and Microstructure Modifcation by Tiwary C. S., Biswas P. , Patra S. , Roy H. , Paliwal M. , Mondal M. K. Metals and Materials International - (2019)
High-K dielectric sulfur-selenium alloys by Susarla S., Tsafack T., Owuor P.S., Puthirath A.B., Hachtel J.A., Babu G., Apte A., Jawdat B.I., Hilario M.S., Lerma A., Calderon H.A., Hernandez F.C.R., Tam D.W., Li T., Lupini A.R., Idrobo J.C., Lou J., Wei B., Dai P., Tiwary C.S., Ajayan P.M. Science Advances 5 - (2019)
High temperature quasistatic and dynamic mechanical behavior of interconnected 3D carbon nanotube structures by Bhowmick S., Ozden S., BizÃ£o R.A., Machado L.D., Asif S.A.S., Pugno N.M., GalvÃ£o D.S., Tiwary C.S., Ajayan P.M. Carbon 142 291-299 (2019)
Stabilization of a Highly Concentrated Colloidal Suspension of Pristine Metallic Nanoparticles by Katiyar N.K., Biswas K., Tiwary C.S., Machado L.D., Gupta R.K. Langmuir 35 2668-2673 (2019)
3D carbon coated NiCo2S4 nanowires doped with nitrogen for electrochemical energy storage and conversion by Tiwary C. S., Zhang J. , Zhu T. , Wang Y. , Cui J. , Sun J. , Yan J. , Qin Y. , Wu J. , Ajayan P. M., Wu Y. Journal of colloid and Interface Science 556 449-457 (2019)
3D Printed Tubulanes as Lightweight Hypervelocity Impact Resistant Structures by Sajadi S.M., Woellner C.F., Ramesh P., Eichmann S.L., Sun Q., Boul P.J., Thaemlitz C.J., Rahman M.M., Baughman R.H., GalvÃ£o D.S., Tiwary C.S., Ajayan P.M. Small 15 - (2019)
3D Printed Tubulanes as Lightweight Hypervelocity Impact Resistant Structures by Tiwary C. S., Sajadi S. M., Woellner C. F., Ramesh P. , Eichmann S. L., Sun Q. , Boul P. J., Thaemlitz C. J., Rahman M. M., Baughman R. H., Galvão D. S., Ajayan P. M. Small 15 - (2019)
Effect of Mn Addition on the Mechanical Properties of Alâ 12.6Si Alloy: Role of Al15(MnFe)3Si2 Intermetallic and Microstructure Modification by Biswas P., Patra S., Roy H., Tiwary C.S., Paliwal M., Mondal M.K. Metals and Materials International - (2019)
Strain-controlled optical transmittance tuning of three-dimensional carbon nanotube architectures by Li Y., Owuor P.S., Dai Z., Xu Q., Salvatierra R.V., Kishore S., Vajtai R., Tour J.M., Lou J., Tiwary C.S., Ajayan P.M. Journal of Materials Chemistry C 7 1927-1933 (2019)
Strain-Induced Structural Deformation Study of 2D Mo x W (1- x ) S 2 by Susarla S., Manimunda P., Jaques Y.M., Hachtel J.A., Idrobo J.C., Asif S.A.S., GalvÃ£o D.S., Tiwary C.S., Ajayan P.M. Advanced Materials Interfaces 6 - (2019)
Structure-Dependent Electrical and Magnetic Properties of Iron Oxide Composites by Tiwary C. S., Lertcumfu N. , Sayed F. N., Shirodkar S. N., Radhakrishnana S. , Mishra A. , Rajijanagul G. , Singh A. K., Yakobson B. I., Ajayan P. M. physica status solidi (a) 216 - (2019)
Structure-Dependent Electrical and Magnetic Properties of Iron Oxide Composites by Lertcumfu N., Sayed F.N., Shirodkar S.N., Radhakrishnana S., Mishra A., Rujijanagul G., Singh A.K., Yakobson B.I., Tiwary C.S., Ajayan P.M. Physica Status Solidi (A) Applications and Materials Science 216 - (2019)
Boxception: Impact Resistance Structure Using 3D Printing by Sajadi S.M., Owuor P.S., Vajtai R., Lou J., Ayyagari R.S., Tiwary C.S., Ajayan P.M. Advanced Engineering Materials - (2019)
Boxception: Impact Resistance Structure Using 3D Printing by Tiwary C. S., Sajadi S. M., Owuor P. S., Vajtai R. , Lou J. , Ayyagari R. S., Ajayan P. M. Advanced Engineering Materials 21 - (2019)
Two-Dimensional Amorphous Cr2O3 Modified Metallic Electrodes for Hydrogen Evolution Reaction by Tiwary C. S., Narayanan S. P., Thakur P. , Balan A. P., Abraham A. A., Mathew F. , Yeddala M. , Subair T. , Thomas S. , Narayanan T. N., Ajayan . ., Anantharaman M. . physica status solidi-Rapid Research Letters 13 - (2019)
Two-Dimensional Amorphous Cr2O3 Modified Metallic Electrodes for Hydrogen Evolution Reaction by Narayanan S.P., Thakur P., Balan A.P., Abraham A.A., Mathew F., Yeddala M., Subair T., Tiwary C., Thomas S., Narayanan T.N., Ajayan P.M., Anantharaman M.M.R. Physica Status Solidi - Rapid Research Letters 13 - (2019)
Two-Dimensional Lateral Epitaxy of 2H (MoSe2) 1T (ReSe2) Phases by Tiwary C. S., Apte A. , Krishnamoorthy A. , Hachtel J. A., Susarla S. , Yoon J. , Sassi L. M., Bhardwaj P. , Tour J. M., Idrobo J. C., Kalia R. K., Nakano A. , Vashishta P. , Ajayan P. M. ACS Nano Letters 19 6338-6345 (2019)
Polytypism in ultrathin tellurium by Apte A., Bianco E., Krishnamoorthy A., Yazdi S., Rao R., Glavin N., Kumazoe H., Varshney V., Roy A., Shimojo F., Ringe E., Kalia R.K., Nakano A., Tiwary C.S., Vashishta P., Kochat V., Ajayan P.M. 2D Materials 6 - (2019)
Low Contact Barrier in 2H/1Tâ ² MoTe 2 In-Plane Heterostructure Synthesized by Chemical Vapor Deposition by Zhang X., Jin Z., Wang L., Hachtel J.A., Villarreal E., Wang Z., Ha T., Nakanishi Y., Tiwary C.S., Lai J., Dong L., Yang J., Vajtai R., Ringe E., Idrobo J.C., Yakobson B.I., Lou J., Gambin V., Koltun R., Ajayan P.M. ACS Applied Materials and Interfaces 11 12777-12785 (2019)
Elastic and â transparent boneâ as an electrochemical separator by Owuor P.S., Inthong S., Sajadi S.M., Intawin P., Chipara A.C., Woellner C.F., Sayed F.N., Tsang H.H., Stender A., Vajtai R., Pengpat K., Eitssayeam S., GalvÃ£o D.S., Lou J., Tiwary C.S., Ajayan P.M. Materials Today Chemistry 12 132-138 (2019)
Elastic and transparent bone as an electrochemical separator by Tiwary C. S., Owuor P. , Inthong S. , Sajadi S. , Intawin P. , Chipara A. , Woellner C. , Sayed F. , Tsang H. , Stender A. , Vajtai R. , Lou J. , Ajayan P. Materials Today Chemistry 12 132-138 (2019)
Magnetism in two-dimensional materials beyond graphene by Sethulakshmi N., Mishra A., Ajayan P.M., Kawazoe Y., Roy A.K., Singh A.K., Tiwary C.S. Materials Today 27 107-122 (2019)
Direct Ink Writing of Cement Structures Modified with Nanoscale Additive by Sajadi S.M., Boul P.J., Thaemlitz C., Meiyazhagan A.K., Puthirath A.B., Tiwary C.S., Rahman M.M., Ajayan P.M. Advanced Engineering Materials - (2019)
Direct Ink Writing of Cement Structures Modified with Nanoscale Additive by Tiwary C. S., Sajadi S. M., Boul P. J., Thaemlitz C. , Meiyazhagan A. K., Puthirath A. B., Rahman M. M., Ajayan P. M. Advanced Engineering Materials 21 - (2019)
Exfoliation of a non-van der Waals material from iron ore hematite by Balan A. P., Radhakrishnan S. , Woellner C. F., Sinha S. K., Deng L. , Reyes C. D., Rao B. M., Paulose M. , Neupane R. , Apte A. , Kochat V. , Vajtai R. , Harutyunyan A. H., Chu C. , Costin G. , Galyao D. S., Marti A. A., Aken P. A., Varghese O. K., Tiwary C. S., Ramaswamy Iyer A. M., Ajayan P. M. Nature Nanotechnology 13 602-609 (2018)
Atomically thin gallium layers from solid-melt exfoliation by Kochat V., Samanta A. , Zhang Y. , Bhowmick S. , Asif S. A., Vajtai R. , Singh A. K., Tiwary C. S., Ajayan P. M. Science Advances 4 1701373- (2018)
Thermally Induced 2D Alloy-Heterostructure Transformation in Quaternary Alloys by Susarla S., Hachtel J.A., Yang X., Kutana A., Apte A., Jin Z., Vajtai R., Idrobo J.C., Lou J., Yakobson B.I., Tiwary C.S., Ajayan P.M. Advanced Materials 30 - (2018)
An Insight into the Phase Transformation of WS2 upon Fluorination by Radhakrishnan S., Das D., Deng L., Sudeep P.M., Colas G., de los Reyes C.A., Yazdi S., Chu C.W., MartÃ A.A., Tiwary C.S., Filleter T., Singh A.K., Ajayan P.M. Advanced Materials 30 - (2018)
Impurity-Controlled Crystal Growth in Low-Dimensional Bismuth Telluride by Sharifi T., Yazdi S., Costin G., Apte A., Coulter G., Tiwary C., Ajayan P.M. Chemistry of Materials 30 6108-6115 (2018)
Structural Phase Transformation in Strained Monolayer MoWSe2 alloy by Apte A., Kochat V. , Rajak P. , Krishnamoorthy A. , Manimunda P. , Hatchel J. A., Idrobo J. C., Syed Amanulla S. A., Vashishta P. , Nakano A. , Kalia R. K., Tiwary C. S., Ajayan P. M. ACS Nano 12 3468-3476 (2018)
Interconnecting Bone Nanoparticles by Ovalbumin Molecules to Build a Three-Dimensional Low-Density and Tough Material by Owuor P.S., Tsafack T., Hwang H.Y., Sajadi M., Jung S., Li T., Susarla S., Wei B., Vajtai R., Lou J., Bhowmick S., Tiwary C.S., Ajayan P.M. ACS Applied Materials and Interfaces 10 41757-41762 (2018)
Polytypism in ultrathin tellurium by Apte A., Bianco E. , Krishnamoorthy A. , Yazdi S. , Rao R. , Glavin N. , Kumazoe H. , Varshney V. , Roy A. , Shimojo F. , Ringe E. , Kalia R. K., Nakano A. , Tiwary C. S., Vashishta P. , Kochat V. , Ajayan P. M. 2D Materials 6 015013- (2018)
Consolidation of Functionalized Graphene at Ambient Temperature via Mechano-chemistry by Kabbani M. A., Kochat V. , Bhowmick S. , Soto M. , Som A. , Krishnadas K. R., Woellner C. F., Jaques Y. M., Barrera E. V., Asif S. , Vajtai R. , Pradeep T. , Galvão D. S., Kabbani A. T., Tiwary C. S., Ajayan P. M. Carbon 134 491-499 (2018)
Telluride-Based Atomically Thin Layers of Ternary Two-Dimensional Transition Metal Dichalcogenide Alloys by Apte A., Krishnamoorthy A., Hachtel J.A., Susarla S., Idrobo J.C., Nakano A., Kalia R.K., Vashishta P., Tiwary C.S., Ajayan P.M. Chemistry of Materials 30 7262-7268 (2018)
Re Doping in 2D Transition Metal Dichalcogenides as a New Route to Tailor Structural Phases and Induced Magnetism by Kochat V., Apte A. , Hatchel J. A., Kumazoe H. , Krishnamoorthy A. , Susarla S. , Idrobo J. C., Shimojo F. , Vashishta P. , Kalia R. , Nakano A. , Tiwary C. S., Ajayan P. M. Advanced Materials 29 1703754- (2017)
Metal Immiscibility Route to Synthesis of Ultrathin Carbides, Borides, and Nitrides by Wang Z., Kochat V. , Pandey P. , Kashyap S. , Chattopadhyay S. , Samanta A. , Sarkar S. , Manimunda P. , Zhang X. , Asif S. , Singh A. K., Chattopadhyay K. , Tiwary C. S., Ajayan P. M. Advanced Materials 29 1700364- (2017)
Directly Identifying Phase Segregation in 2D Quaternary Alloys by Hatchel J. A., Susarla S. , Kochat V. , Tiwary C. S., Ajayan P. , Idrobo J. C. Microscopy and Microanalysis 23 1438-1439 (2017)
Phase Segregation Behavior of Two-Dimensional Transition Metal Dichalcogenide Binary Alloys Induced by Dissimilar Substitution by Susarla S., Kochat V. , Kutana A. , Hatchel J. A., Idrobo J. C., Vajtai R. , Yakobson B. I., Tiwary C. S., Ajayan P. M. Chemistry of Materials 29 7431-7439 (2017)
Effect of Carrier Localization on Electrical Transport and Noise at Individual Grain Boundaries in Monolayer MoS2 by Hseih K., Kochat V. , Zhang X. , Gong Y. , Tiwary C. S., Ajayan P. M., Ghosh A. Nano Letters 17 5452-5457 (2017)
Fluorinated h-BN as magnetic semiconductor by Radhakrishnan S., Das D. , Samanta A. , Reyes C. D., Deng L. , Alemany L. B., Weldeghiorghis T. K., Khabashesku V. N., Kochat V. , Jin Z. , Sudeep P. M., Marti A. A., Chu C. , Roy A. , Tiwary C. S., Ajayan P. M. Science Advances 3 1700842- (2017)
Ultrafast non-radiative dynamics of atomically thin MoSe2 by Lin M., Kochat V. , Krishnamoorthy A. , Weninger C. , Zhang X. , Apte A. , Tiwary C. S., Li R. , Prezhdo O. , Kalia R. , Ajayan P. , Nakano A. , Wang X. , Vashishta P. , Fritz D. , Bergmann U. Nature Communications 8 1745- (2017)
Quaternary 2D transition metal dichalcogenides with tunable bandgap by Susarla S., Kutana A. , Hatchel J. A., Kochat V. , Apte A. , Vajtai R. , Idrobo J. C., Yakobson B. I., Tiwary C. S., Ajayan P. M. Advanced Materials 29 1702457- (2017)
2D Heterostructure coatings of hBN-MoS2 layers for corrosion resistance by Vandana S., Kochat V. , Lee J. , Varshney V. , Yazdi S. , Shen J. , Kosolwattana S. , Vinod S. , Vajtai R. , Roy A. K., Tiwary C. S., Ajayan P. M. J. Phys. D: Appl. Phys. 50 045301- (2016)
Magnitude and Origin of Electrical Noise at Individual Grain Boundaries in Graphene by Kochat V., Tiwary C. S., Biswas T. , Ramalingam G. , Hseih K. , Chattopadhyay K. , Raghavan S. , Jain M. , Ghosh A. Nano Letters 16 562- (2016)

Edited Volume

A Pioneer in Nanotechnology: Journey of Materials Innovation by Tiwary C.S., Shaijumon M.M., Narayanan T.N., Kochat V. Small 21 2504813-2504813 (2025)
Preface: Festschrift in honor of Prof. Kamanio Chattopadhyay by Tiwary C.S., Mukhopadhyay N.K., Narayanan R. Journal of Materials Science 60 1043-1045 (2025)

Others

Corrigendum to Use of waste to wealth process derived sustainable silica-rich graphene analogues to provide enhanced corrosion resistance properties for coatings on carbon steel, exposed to marine environments [Surf. Coat. Technol. 464 (2023) 129420] (Surface & Coatings Technology (2023) 464, (S0257897223001950), (10.1016/j.surfcoat.2023.129420)) by Verma A., Singh H., Mahton Y., Saha P., Tiwary C.S., Bhattacharya J. Surface and Coatings Technology 497 - (2025)

Conferences

Ultrafast Transient Absorption Spectroscopy in Few-layered MnTe by Prodhan S., Karmakar A.J., Ghosh D., Gowda C.C., Tiwary C.S., Datta P.K. Laser Science - Proceedings Frontiers in Optics + Laser Science 2025 - (2025)
Green Graphene-Based Anticorrosive Coating for Carbon Steel in Marine Environment by Verma A., Tiwary C.S., Bhattacharya J. Springer Proceedings in Physics 293 161-166 (2023)
Enhanced photocatalytic degradation of sulfamethoxazole over a quinary high entropy alloy under visible light by Das S., Chowdhury S. , Tiwary C. S. 27th Annual Green Chemistry & Engineering Conference - (2023)
A scalable one-pot synthesis of Fe-N-ZnO catalyst for the degradation of bio-toxic Ciprofloxacin under UV irradiation by Gupta B., Gupta A. K., Ghosal P. S., Tiwary C. S. International Conference on Water, Energy, and Environmental Sustainability 2020 (WEES 2020) 29- (2020)
A short review on the source, occurrence, eco-toxic effects, and catalyst based advanced oxidation techniques for the removal of Ciprofloxacin by Gupta B., Gupta A. K., Ghosal P. S., Tiwary C. S. 52nd Annual Convention 2020 of Indian Water Works Association (IWWA) - (2020)

Book Chapter/Section

Elastomeric hybrid nanosystems for multifunctional applications by Ambekar R.S., Ozden S., Tiwary C.S. Hybrid Nanofillers for Polymer Reinforcement: Synthesis, Assembly, Characterization, and Applications 391-400 (2024)
Emerging Contaminants in the Aquatic Environment: Fate, Occurrence, Impacts, and Toxicity by Das S., Parida V.K., Tiwary C.S., Gupta A.K., Chowdhury S. ACS Symposium Series 1475 1-32 (2024)
The effective utilization of different types of wastes to produce graphene and graphene analogs: applications, innovations, and challenges with special emphasis on agricultural waste by Verma A., Mahapatra P.L., Srija A., Taksal P.A., Raj S., Singh H., Das B., Choudhury S., Tiwary C.S., Bhattacharya J. Graphene Extraction from Waste: a Sustainable Synthesis Approach for Graphene and Its Derivatives 349-374 (2023)

Book

Graphene Extraction from Waste: A Sustainable Synthesis Approach for Graphene and its Derivatives by Hussain C.M., Srivastav A.K., Tiwary C.S., Tour J.M. Graphene Extraction from Waste: A Sustainable Synthesis Approach for Graphene and its Derivatives 1-381 (2023)

Patent

FLUORINE AND HYDROGEN - BASED ADHESIVE COMPOSITIONS AND METHODS OF MAKING THE SAME by Tiwary C. S., Chipara A. C., Chipara M. , Ajayan P. M. - (2019)

Metallurgical and Materials Engineering

Faculty

Chandra Sekhar Tiwary

Responsibilities

Research Areas

Principal Investigator

Co-Principal Investigator

Ph. D. Students

Abhilasha Pandey

Akash Rawat

Anjali Jayakumar

Arghyarupa Mallick

Bethelehem Burju Bukate

Dipanwita Mitra

Dipika Sarkar

Komal Dubey

Md Tahrim Alam

Noorbasha Bhavani Sai

Pranjal Ghosal

Pratyasha Das

Rupam Bandyopadhyay

Sanjit Kumar

Saswata Goswami

Shivangi Pandey

Sibani Mahapatra

Suman Supriya Sahu

Surbhi Slathia

Tapas Pal

Zahoor Manzoor