Indian Institute of Technology Kharagpur |

Journal

Tailoring the thermal and electrical conductivity of powder metallurgy porous copper for thermal management through pore structure modification by Ray S., Pillari L.K., Bichler L., Kar S.K., Roy S. International Journal of Heat and Mass Transfer 258 - (2026)
Deformation behaviour of friction stir welded Cu-Cr-Zr-Ti alloy sheet during single point incremental forming by Behera D. R., Katiyar B. S., Singh A. , Kundu P. , Panda S. K., Kar S. K., Murty S. N. Trends in Material Processing Proceedings of the AIMTDR 2023 281-292 (2026)
Segregation analysis using 3D APT in boron-containing modified 9Cr-1Mo steel by Sampreeth S., Poojari G., Das C.R., Makineni S.K., Pradeep K.G., Vasudevan M., Kar S.K. Scripta Materialia 278 - (2026)
On improvement in mechanical properties by aging heat-treatment of deformed Cu-Cr- Zr-Ti component fabricated through SPIF process by Behera D. R., Murty S. , Kar S. K., Panda S. K. Journal of Materials Engineering and Performance - (2026)
A comprehensive review of aspects of columnar to equiaxed transition, phase stability, and properties in novel Ti-alloys developed by additive manufacturing by Mohanty I., Kar S.K. Journal of Alloys and Compounds 1038 - (2025)
Non-destructive Ultrasound Phase Spectroscopy for the Analysis of Elastic Properties of Complex Hybrid Materials by Ray S., Kar S. K., Wanner A. , Roy S. Transactions of the Indian Institute of Metals 78 85- (2025)
Influence of aging on microstructure evolution and mechanical properties of ultra-low carbon Fe-Cr-Ni-Ti-Mo PH martensitic stainless steel: Insights into austenite stability and Ni3Ti precipitation by Poojari G., S S., Kumar H., Tharian T., Makineni S.K., Singh S.B., Kar S.K. Materials Science and Engineering: A 952 - (2025)
Insights into the sliding wear behaviour under dry and 3.5 wt.% NaCl solution of Fe-Cr-Ni-Mo-Ti PH martensitic stainless steel by Poojari G., Sampreeth S. , Tharian T. , Singh S. B., Kar S. K. Wear 572-573 - (2025)
Effect of aging temperature on the redrawn cup wall of a novel Cu-0.5Cr-0.05Zr-0.05Ti (wt.%) alloy sheet: Analyses on microstructure evolution, mechanical properties and strengthening mechanism by Behera D. R., Kundu P. , Murty S. N., Kar S. K., Panda S. K. Materials Chemistry and Physics 329 - (2025)
Effect of Fe Alloying on Phase Evolution, Microstructure, Mechanical and Tribological Properties of Ti64 Alloy via Laser Material Deposition by Mohanty I., Misra S. , Kar S. K., Saha P. TMS 2025 154th Annual Meeting & Exhibition Supplemental Proceedings. TMS 2025, The Minerals, Metals & Materials Series - (2025)
Effect of Porosity and Pore Morphology on the Elastic Properties and Compressive Deformation Behavior of Porous Copper Fabricated via Space Holder Route by Ray S., Kar S. K., Roy S. Advanced Engineering Materials 27 - (2025)
Effect of Porosity and Pore Morphology on the Elastic Properties and Compressive Deformation Behavior of Porous Copper Fabricated via Space-Holder Route by Ray S., Siddharth, Kar S.K., Roy S. Advanced Engineering Materials 27 - (2025)
Development of Beta-Phase Strengthened Ti Alloys With Improved Mechanical and Tribological Properties via Laser-Material Deposition by Mohanty I., Misra S. , Kar S. K., Saha P. Proceedings of the ASME 2024 19th International Manufacturing Science and Engineering Conference. Volume 1: Additive Manufacturing; Advanced Materials Manufacturing; Biomanufacturing; Life Cycle Engineering. Knoxville, Tennessee, USA. June 17 21, 2024. V001T01A009. ASME 1 09- (2024)
Forming limit and failure characterization of as-received and bi-axial prestrained Cu-Cr-Zr-Ti alloy sheets in the context of multistage forming by Behera D. R., Katiyar B. S., Panda S. K., Kar S. K., Murty S. N. Materials Characterization 214 114104- (2024)
Forming limit and failure characterization of as-received and bi-axial prestrained Cu-Cr-Zr-Ti alloy sheets in the context of multistage forming by Behera D.R., Katiyar B.S., Panda S.K., Kar S.K., Murty S.V.S.N. Materials Characterization 214 - (2024)
A novel attempt to deform electron beam welded C-103 refractory alloy sheets using multi-stage single point incremental forming for space applications by Katiyar B. S., Kundu P. , Behera D. R., Rakshit R. , Kumar R. R., Murty S. N., Kar S. K., Panda S. K. Journal of Manufacturing Processes 131 199-212 (2024)
A novel attempt to deform electron beam welded C-103 refractory alloy sheets using multi-stage single point incremental forming for space applications by Katiyar B.S., Kundu P., Behera D.R., Rakshit R., Kumar R.R., Murty S.V.S.N., Kar S.K., Panda S.K. Journal of Manufacturing Processes 131 199-212 (2024)
Microstructure characterization and formability assessment of electron beam welded Nb-10Hf-1Ti (wt.%) refractory alloy sheets by Behera D. R., Prakash P. L., Kundu P. , Jumar R. R., Murty S. N., Kar S. K., Panda S. K. International Journal of Refractory Metals and Hard Materials 125 - (2024)
Microstructure characterization and formability assessment of electron beam welded Nb-10Hf-1Ti (wt.%) refractory alloy sheets by Behera D.R., Lin Prakash P.S., Kundu P., Kumar R.R., Murty S.V.S.N., Kar S.K., Panda S.K. International Journal of Refractory Metals and Hard Materials 125 - (2024)
An ultrasonic study of the effect of uniaxial green compaction pressure on the elastic anisotropy of porous copper fabricated using the pore-former route by Ray S., Kar S. K., Roy S. Materials Chemistry and Physics 316 129094- (2024)
Exploring an alloy space in a new generation -TiAl system Ti xAl yNb 1Cr 1Mo 0.2 C 0.2 B (at.%)): Aspects of phase transformation, microstructure and texture by Banerjee T., Banumathy S. , Shekhar S. , Gupta D. K., Bhattacharjee A. , Kar S. K. Materials Characterization 217 - (2024)
Exploring an alloy space in a new generation -TiAl system Ti xAl yNb 1Cr 1Mo 0.2C 0.2B (at.%)): Aspects of phase transformation, microstructure and texture by Banerjee T., Banumathy S., Shekhar S., Gupta D.K., Bhattacharjee A., Kar S.K. Materials Characterization 217 - (2024)
Effect of prior cold rolling and aging temperature on PH martensitic stainless steel: Evolution of microstructure, micro-texture and austenite stability by Poojari G., Kumar H., Sampreeth S., Tharian T., Makineni S.K., Singh S.B., Kar S.K. Materialia 33 - (2024)
Study of phase evolution, mechanical, and tribological behaviour of a novel -phase strengthened Ti-alloy with Fe and Co alloying via a laser material deposition route by Mohanty I., Misra S., Kar S.K., Saha P. Journal of Alloys and Compounds 1007 - (2024)
Study of phase evolution, mechanical, and tribological behaviour of a novel -phase strengthened Ti-alloy with Fe and Co alloying via a laser material deposition route by Mohanty I., Misra S. , Kar S. K., Saha P. Journal of Alloys and Compounds 1007 176469- (2024)
Influence of monomodal K2CO3 and bimodal K2CO3 + NaCl as space holders on microstructure and mechanical properties of porous copper by Ray S., Jana P., Kar S.K., Roy S. Materials Science and Engineering A 862 - (2023)
Deep drawing and redrawing of solution-treated Cu-Cr-Zr-Ti alloy sheets and post-forming characterization of the redrawn cup wall by Behera D., Katiyar B. S., Das S. , Panda S. K., Kar S. K., Murty S. Archives of Civil and Mechanical Engineering 23 1-20 (2023)
Analysis of Surface Strain Distribution over the Biaxial Stretch-Formed and Deep-Drawn Cups of Cu-Cr-Zr-Ti Alloy Thin Sheet by Behera D. R., Panda S. K., Kar S. K., Tharian T. K., Murty S. N. International Conference on Product Life Cycle Modelling, Simulation and Synthesis (PLMSS) - Product Life Cycle Space Systems Perspective 1-8 (2023)
Temporal evolution of precipitate in HAYNES 282 during ageing: growth and coarsening kinetics, solute partitioning and lattice misfit by Mukherjee S., Sahu B.P., Sarkar S.K., Ahlawat S., Biswas A., Mandal G.K., Tarafder S., Kar S.K. Materialia 26 - (2022)
A Comprehensive Review on Ti-Alloy Research and Recent Trends by Kar S. K., Banerjee T. IIM METAL NEWS 25 9-22 (2022)
Creep-Fatigue Response, failure mode and deformation mechanism of HAYNES 282 Ni based superalloy: Effect of dwell position and time by Mukherjee S., Kar S. K., Sivaprasad S. , Tarafder S. , Viswanathan G. B., Fraser H. L. International Journal of Fatigue 159 1-18 (2022)
Influence of ageing on high temperature tensile deformation of a Ni-based superalloy, HAYNES 282 by Mukherjee S., Sivaprasad S. , Tarafder S. , Bhattacharyya D. , Kar S. K. Journal of Alloys and Compounds - (2022)
Influence of ageing on high temperature tensile deformation of a Ni-based superalloy, HAYNES 282 by Mukherjee S., Sivaprasad S., Tarafder S., Bhattacharyya D., Kar S.K. Journal of Alloys and Compounds 917 - (2022)
Study of the elastic properties of porous copper fabricated via the lost carbonate sintering process by Jana P., Ray S. , Goldar D. , Kota N. , Kar S. K., Roy S. Materials Science and Engineering A 836 1-14 (2022)
Creep-fatigue behavior of a newly developed ultra-supercritical steam turbine grade nickel-based superalloy, Haynes 282 by Mukherjee S., Barat K., Tarafder S., Sivaprasad S., Kar S.K. Materials Performance and Characterization 10 - (2021)
Low cycle fatigue behavior and deformation mechanism of different microstructures in Ti-5Al-5Mo-5V-3Cr alloy by Sen M., Suman S., Mukherjee S., Banerjee T., Sivaprasad S., Tarafder S., Bhattacharjee A., Kumar Kar S. International Journal of Fatigue 148 - (2021)
Atomic Scale Structure Inspired 3D Printed Porous Structures with Tunable Mechanical Response by Ambekar R. S., Mohanty I. , Kishore S. , Das R. , Pal V. , Kushwaha B. , Roy A. K., Kar S. K., Tiwary C. S. Advance Engineering Materials - (2021)
Constitutive modelling and formability prediction of Inconel-718 sheet at elevated temperatures for space applications by Prasad K.S., Panda S.K., Kar S.K., Murty S.V.S.N., Sharma S.C. Advances in Materials and Processing Technologies - (2020)
Anomalous Dilatometric Response of Hot-Worked Ti-5Al-5Mo-5V-3Cr Alloy: In Terms of Evolution of Microstructure, Texture and Residual Stress by Sen M., Kar S.K., Banerjee T., Bhattacharjee A., Dutta A., Banerjee S. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 51 2011-2024 (2020)
A novel rate based methodology for creep fatigue life estimation of superalloys by Barat K., Sivaprasad S., Kar S.K., Tarafder S. International Journal of Pressure Vessels and Piping 182 - (2020)
Tensile deformation mechanism and failure mode of different microstructures in Tiâ 5Alâ 5Moâ 5Vâ 3Cr alloy by Sen M., Suman S., Banerjee T., Bhattacharjee A., Kar S.K. Materials Science and Engineering A 753 156-167 (2019)
Low-cycle fatigue of IN 718: Effect of waveform by Barat K., Sivaprasad S., Kar S.K., Tarafder S. Fatigue and Fracture of Engineering Materials and Structures 42 2823-2843 (2019)
Low Transverse Ductility in a New High-Strength Corrosion-Resistant Steel: Microstructure andÂ Texture by Poojari G., Kar S.K., Singh S.B., Kadavil T.T., Anoop C.R. Transactions of the Indian Institute of Metals 72 1453-1457 (2019)
Prediction Capability of Constitutive Models for Inconel 718 Sheets Deformed at Various Elevated Temperatures and Strain Rates by Prasad S. K., Panda S. K., Kar S. K., Murty S. , Sharma S. C. Materials Performance and Characterization 8 869-891 (2019)
Elevated temperature low cycle fatigue behaviour of Haynes 282 and its correlation with microstructure â Effect of ageing conditions by Mukherjee S., Barat K., Sivaprasad S., Tarafder S., Kar S.K. Materials Science and Engineering A 762 - (2019)
Effect of solution treatment on deep drawability of IN718 sheets: Experimental analysis and metallurgical characterization by Prasad K.S., Panda S.K., Kar S.K., Murty S.V.S.N., Sharma S.C. Materials Science and Engineering A 727 97-112 (2018)
Effect of solution treatment on the formability and part performance of IN718 sheet material by Prasad K.S., Panda S.K., Kar S.K., Murty S.V.S.N., Sharma S.C. Advances in Materials and Processing Technologies 4 680-694 (2018)
Thermo-mechanical processing window for Î² phase recrystallization inTi-5Al-5Mo-5V-3Cr alloy by Sen M., Suman S., Kumar M., Banerjee T., Bhattacharjee A., Kar S.K. Materials Characterization 146 55-70 (2018)
Effect of Temperature and Deformation Speed on Formability of IN718 Sheets: Experimentation and Modelling by Prasad S. K., Panda S. K., Kar S. K., Singh S. K., Murty S. , Sharma S. C. IOP Conference Series: Materials Science and Engineering 418 1-8 (2018)
Prediction of fracture and deep drawing behavior of solution treated Inconel-718 sheets: Numerical modeling and experimental validation by Prasad K.S., Panda S.K., Kar S.K., Murty S.V.S.N., Sharma S.C. Materials Science and Engineering A 733 393-407 (2018)
High-Temperature Low-Cycle Fatigue Behavior in HAYNES 282: Influence of Initial Microstructure by Barat K., Ghosh M., Sivaprasad S., Kar S.K., Tarafder S. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 49 5211-5226 (2018)
Creep Fatigue Interaction under Different Test Variables: Mechanics and Mechanisms by Barat K., S S. , Kar S. K., Tarafder S. Journal of Testing and Evaluation 46 2521-2539 (2018)
Microstructures, forming limit and failure analyses of Inconel 718 sheets for fabrication of aerospace components by Prasad S., Panda S. K., Kar S. K., Murty S. , Sharma S. C. Journal of material engineering and performance 26 1-18 (2017)
Ultrasonic quantification of high temperature cyclic damage in an advanced nickel based superalloy by Kaustav Barat, A. Metya , S. Sathpathy, S. Sivaprasad, S. Tarafder and Sujoy Kumar Kar Materials Science and Engineering A 625 194-204 (2015)
Finite Element Validation of Forming Limit Diagram of IN-718 Sheet Metal by Prasad K. S., Kamal T. , Panda S. K., Kar S. K., Murty S. , Sharma S. C. Materials Today 2 2037-2045 (2015)
Effect of Bending Strain in Forming Limit Strain and Stress of IN-718 Sheet Metal by Prasad S., Panda S. K., Kar S. K., Murty S. , Sharma S. C. Materials Science Forum 830 238-241 (2015)
Effect of solution treatment and aging on microstructure and tensile properties of high strength β titanium alloy, Ti-5Al-5V-5Mo-3Cr by Shashi Shekhar, Rajdeep Sarkar, Sujoy Kumar Kar, Amit Bhattacharjee Materials and Design 66 596-610 (2015)
Influence of boron and nitrogen on microstructure and hardness of heat-affected zone of modified 9Cr 1Mo steel Gleeble simulation study by Das C. R., Bhaduri A. K., Lakshmi S. , Chakravarty S. , Kar S. K., Albert S. K. Welding in the World 59 513-519 (2015)
Influence of PWHT on toughness of high chromium and nickel containing martensitic stainless steel weld metals by M. Divya, C. Das, S. Mahadevan, Shaju Albert, R. Pandian, Sujoy Kar, Arun Bhaduri, and T. Jayakumar Metallurgical and Materials Transactions A 46A 2554-2567 (2015)
Processing-Microstructure-Yield strength correlation in a near beta Ti alloy, Ti-5Al-5Mo-5V-3Cr by Sujoy Kumar Kar, Swati Suman, S Sivaprasad, Atanu Chaudhuri, Amit Bhattacharjee Materials Science and Engineering A 610 171-180 (2014)
Microstructure based and temperature dependent model of flow behavior of a polycrystalline nickel based superalloy by Sujoy Kumar Kar, S. K. Sondhi Materials Science and Engineering: A 601 97-105 (2014)
Phase Stability in the Mo-Ti-Zr-C system via Thermodynamic Modeling and Diffusion Multiple Validation by Sujoy Kumar Kar, Voramon S. Dheeradhada, and Don M. Lipkin Metallurgical and Materials Transactions A 44 3999 - 4010 (2013)
Quantitative Microstructural Characterization of a near beta Ti alloy, Ti-5553 under Different Processing Conditions by Sujoy Kumar Kar, Atasi Ghosh, Nishant Fulzele, Amit Bhattacharjee Materials Characterization 81 37-48 (2013)
Review of Phase Transformations in Multicomponent Melts, edited by Dieter M. Herlach by Kar S. K. Materials and Manufacturing Processes 28 225-226 (2013)
Microstructure-fracture toughness correlation in an aircraft structural component alloy Ti-5Al-5V-5Mo-3Cr by Ghosh A., Sivaprasad S. , Bhattacharjee A. , Kar S. K. Materials Science and Engineering: A 568 61-67 (2013)
Evolution of microstructure and mechanical properties during annealing of cold-rolled AA8011alloy by Roy R. K., Kar S. K., Das S. Journal of Alloys and Compounds 468 122-129 (2009)
Thermodynamic and microstructural modeling of Nb-Si based alloys by Amancherla S., Kar S. K., Bewlay B. P., Yang Y. , Chang A. Journal of phase equilibria and diffusion 28 2-8 (2007)
Selection of alpha variants during microstructural evolution in alpha/beta titanium alloys by Lee E., Banerjee R. , Kar S. K., Bhattacharya D. , Fraser H. L. Philos. Mag. A 87 3615-3627 (2007)
Modeling The Tensile Properties in Beta-Processed Alpha/Beta Ti Alloys by S. Kar, T. Searles, E. Lee, G.B. Viswanathan, J. Tiley, R. Banerjee, H. L. Fraser Metallurgical and Materials Transactions A 37A - (2006)
A study of precipitation and recrystallization behavior of aluminum alloy AA1235 by Roy R. K., Kar S. K., Das K. , Das S. Journal of Materials Science 41 1039-1045 (2006)
Root-like Structure at the Nanowire / Substrate Interface in GaAs Nanowires by Banerjee R., Bhattacharya A. , Ratan R. , Shah A. P., Gokhale M. R., Arora B. M., Genc A. , Kar S. K. Appl. Phys. Lett. 88 - (2006)
Evolution of In-Situ generated Reinforcement Precipitates In Metal Matrix Composites by Sen S., Kar S. K., Catalina A. V., Stefanescu D. M., Dhindaw B. K. International Conference on Solidification Science and Processing, Emerging Trends 58 709-714 (2005)
Microstructures and tensile properties of commertial purity aluminum alloy AA1235 under different annealing conditions by Roy R. K., Kar S. K., Das K. , Das S. Materials Letters 59 - (2005)
Quantification of Alpha Laths in Alpha/Beta Titanium Alloys by Williams R. E., Searles T. , Kar S. K., Uchic M. , Dimiduk D. , Fraser H. L. Microscopy and Microanalysis 11 1662-1663 (2005)
Rapid Characterization of Titanium Microstructural Features for Specific Modeling of Mechanical Properties by Searles T., Tiley J. , Tanner A. , Williams R. , Rollins B. , Lee E. , Kar S. K., Banerjee R. , Fraser H. L. Measurement Science and Technology 16 - (2005)
Quantification of microstructural features in alpha/ beta Titanium alloys by Tiley J., Searles T. , Lee E. , Kar S. K., Banerjee R. , Russ J. C., Fraser H. L. Materials Science and Engineering A 372 - (2004)

Book Chapter/Section

Development of Novel Ti64-Fe-Co-Based -Titanium Alloy with Improved Strength and Elongation Properties Using Laser Processing Route by Mohanty I., Misra S. , Kar S. K., Saha P. Advances in Additive Manufacturing Volume I: Lecture Notes in Mechanical Engineering 55-66 (2025)
Solidification Microstructure Evolution Modeling in Nb-Si Based Intermetallics-Strengthened-Metal-Matrix Composites by Kar S. K., Bewlay B. P., Yang Y. Symposium U Advanced Intermetallic-Based Alloys for Extreme Environment and Energy Applications - MRS Proceedings, 1128 - (2008)
Influence of Crystallographic Variant Selection on Microstructural Evolution in Titanium Alloys by Kar S. K., Banerjee R. , Lee E. , Fraser H. L. Proceedings of an International Conference on Solid - Solid Phase Transformations in Inorganic Materials 2005, Diffusional Transformations 133-138 (2005)

Conferences

Effect of Fe Alloying on Phase Evolution, Microstructure, Mechanical and Tribological Properties of Ti64 Alloy via Laser Material Deposition by Mohanty I., Misra S. , Kar S. K., Saha P. TMS 2025 154th Annual Meeting & Exhibition (TMS 2025) 101-112 (2025)
Unravelling the physical metallurgy of XH55 alloy used in cryogenic application by Das S., Gosain O. P., Kumar R. R., Kar S. K., Murty S. Metals, Materials and Manufacturing conference - (2025)
Segregation during solutionizing and subsequent phase evolution during tempering and creep in P91B steel a study through APT and TEM analyses by S S., Makineni S. , Das C. R., Kar S. K. International Conference of Microscopy & XLIII (43rd) Annual Meeting of Electron Microscopy Society of India (EMSI) - (2025)
Development of Novel Ti64-Fe-Co-Based Beta-Titanium Alloy with Improved Strength and Elongation Properties Using Laser Processing Route by Mohanty I., Misra S., Kar S.K., Saha P. Lecture Notes in Mechanical Engineering 55-66 (2025)
Microstructure evolution and mechanical properties of Fe-Cr-Ni-Ti-Mo PH martensitic stainless steel: Influence of aging temperature and time by Poojari G., Tharian T. , Singh S. B., Kar S. K. INDO-AUSTRIAN symposium on Materials Engineering (IASME-2024) - (2024)
DEVELOPMENT OF -PHASE STRENGTHENED TI ALLOYS WITH IMPROVED MECHANICAL AND TRIBOLOGICAL PROPERTIES VIA LASER-MATERIAL DEPOSITION by Mohanty I., Misra S., Kar S.K., Saha P. Proceedings of ASME 2024 19th International Manufacturing Science and Engineering Conference, MSEC 2024 1 - (2024)
Segregation analysis by 3D atom probe tomography in boron containing modified 9Cr-1Mo steel by S S., Das C. R., Kar S. K. International Conference on Electron Microscopy - (2024)
Effect of Novel -eutectoid Alloying for Improved Mechanical and Tribological Properties of Titanium via Laser Material Deposition by Mohanty I., Misra S. , Kar S. K., Saha P. IIM ATM 2024 - (2024)
Study of the elastic properties and compressive behaviour of porous copper fabricated using powder metallurgy route and having different porosities and pore morphologies by Ray S., Kar S. K., Roy S. IIM-ATM 2024 & NMA - (2024)
Development of Novel Ti64-Fe-Co-based -Titanium Alloy with Improved Strength and Elongation Properties Using Laser Processing Route by Mohanty I., Misra S. , Kar S. K., Saha P. 9th International & 30th All India Manufacturing Technology, Design & Research Conference (AIMTDR 2023) - (2023)
Development of -phase strengthened Titanium alloy to achieve improved strength and ductility via laser processing by Mohanty I., Misra S. , Kar S. K., Saha P. EUROMAT 2023 - (2023)
Influence of aging temperature and time on the formation of reverted austenite and precipitation of Ni3Ti during aging of indigenously developed PH martensitic stainless steel by Poojari G., Tharian T. , Singh S. B., Kar S. K. EUROMAT 2023 - (2023)
Quantitative analysis of boron enrichment into M23C6 precipitates after tempering and creep in B added modified 9Cr-1Mo steel using 3D APT by S S., Das C. R., Kar S. K. EUROMAT 2023 - (2023)
Comparative study of the elastic and compressive properties of monomodal and bimodal porous copper fabricated via powder metallurgy technique by Ray S., Kar S. K., Roy S. FEMS EUROMAT 2023 - (2023)
Deformation behaviour of friction stir welded Cu-Cr-Zr-Ti alloy sheet during single point incremental forming by Behera D. R., Katiyar B. S., Singh A. , Kundu P. , Panda S. K., Kar S. K., Murty S. AIMTDR-2023 - (2023)
Investigation on the formation of reverted austenite and precipitation of Ni3Ti during ageing of MDN 465 PH martensitic stainless steel by Poojari G., Tharian T. K., Singh S. B., Kar S. K. IIM ATM 2022 - (2022)
Quantitative analysis of Boron enrichment into M23C6 precipitates during tempering and creep in modified 9Cr-1Mo steel by atom probe tomography by S S., Pradeep K. G., Das C. R., Kar S. K. IIM ATM 2022 - (2022)
Effect of addition of -phase stabilizing elements on the microstructure and mechanical properties of Ti64 via laser-based processing route by Mohanty I., Misra S. , Kar S. K., Saha P. IIT ATM 2022 - (2022)
Effect of addition of -phase stabilizing elements on the microstructure and mechanical properties of Ti64 via laser-based processing route by Mohanty I., Mishra G. , Saha P. , Kar S. K. IIM ATM 2022 - (2022)
Effect of Al and Nb variations on post solidification and heat treatment microstructure characteristics by Banerjee T., Banumathy S. , Gupta D. K., Shekhar S. , Bhattacharjee A. , Kar S. K. IIM ATM 2022 - (2022)
Quantitative analysis of segregation of elements at the PAGB in B added 9Cr 1mo steel by S S., Das C. R., Kar S. K. IIM ATM 2021 - (2021)
Correlative microscopy of precipitate evolution during ageing, its coarsening kinetics, solute partitioning behavior, and lattice misfit in Haynes 282 by Mukherjee S., Sarkar S. K., Ahlawat S. , Biswas A. , Tarafder S. , Kar S. K. 12th Asia Pacific Microscopy Conference - (2020)
Effect of Al and Nb variation on compressive behaviour of -TiAl by Banerjee T., Rao M. B., Sen M. , Bhattacharjee A. , Kar S. K. EUROMAT 2019 - (2019)
Phase stability study in TiAl based intermetallic system by Banerjee T., Banumathy S. , Neelam N. , Bhattacharjee A. , Kar S. K. NMD-ATM 2019 - (2019)
Effect of Temperature and Deformation Speed on Formability of IN718 Sheets: Experimentation and Modelling by Prasad K. S., Panda S. K., Kar S. K., Murty S. , Sharma S. C. IDDRG-2018 - (2018)
Effect of Temperature and Deformation Speed on Formability of IN718 Sheets: Experimentation and Modelling by Prasad K.S., Panda S.K., Kar S.K., Singh S.K., Murty S.V.S.N., Sharma S.C. IOP Conference Series: Materials Science and Engineering 418 - (2018)
Low Transverse Ductility in a New High-Strength Corrosion-Resistant Steel: Microstructure and Texture by Poojari G., Tharian T. , Singh S. B., Kar S. K. ICAMPS2018 - (2018)
Effect of long term ageing on HTLCF behaviour and deformation mechanisms of Ni based superalloy by Mukherjee S., Sivaprasad S. , Tarafder S. , Kar S. K. NMD ATM 2018 - (2018)
Effect of microstructural heterogeneity and inclusions on the transverse ductility of ultra high strength steel by Poojari G., Tharian T. , Singh S. B., Kar S. K. NMD ATM IIM 2018 - (2018)
Phenomenological models to predict flow stress behavior of IN718 sheets at various elevated temperatures and strain by Prasad K., Panda S. K., Kar S. K., Murty S. , Sharma S. C. ADMAT-2017 - (2017)
Effect of solution treatment on the formability and part performance of IN718 sheet material by Prasad S., Panda S. K., Kar S. K., Murty S. , Sharma S. C. AMPT-2017 - (2017)
Effect of Bending Strain in Forming Limit Strain and Stress of IN-718 Sheet Metal by Prasad S., Panda S. K., Kar S. K., Murty S. , Sharma S. C. ICAMPS-2015 - (2015)
Finite Element Validation of Forming Limit Diagram of IN-718 Sheet Metal by Prasad S., Kamal T. , Panda S. K., Kar S. K., Murty S. , Sharma S. C. ICMPC-2015 - (2015)