Indian Institute of Technology Kharagpur |

Patent

A method of measuring corrosion behaviour of underground metallic pipeline structures by Bairi L. R., Ghosh A. , Narang M. , Bandyopadhyay T. K., Mandal S. - (2026)
Medium-manganese steel and a method for fabricating the same by Ghosh D., Kumar S. , Mandal S. - (2025)
Process for selective recovery of rare earth elements (REEs) from spent neodymium iron boron (NdFeB) magnets by Borra C. R., Mandal S. , Borra V. L. - (2025)
Ni modified low alloy high strength steel and a process to produce the same by Kumar S., Sarkar A. , Nayak D. , Mandal S. , Bandyopadhyay T. K. - (2024)
Process for selective recovery of rare earth elements (REEs) from spent neodymium iron boron (NdFeB) magnets. by Borra C. R., Mandal S. , Borra V. - (2024)
Process for selective recovery of rare earth elements (REEs) from spent neodymium iron boron (NdFeB) magnets. by Borra C. R., Borra V. , Mandal S. - (2024)
Process For Selective Recovery Of Rare Earth Elements(REEs) From Spent Neodymium Iron Boron(NdFeB) Magnets. by Borra C. R., Mandal S. , Borra V. - (2024)
A method for fabricating low Manganese steel by Dhanya J., Kumar S. , Ghosh D. , Singh S. B., Mukherjee S. , Mandal S. - (2024)
Nickel containing medium manganese steel and the method of production thereof by Kumar S., Sarkar A. , Bandyopadhyay T. K., Mukherjee S. , Mandal S. - (2023)
Nickel-modified medium manganese advanced high strength steel with improved processing routes for automobile applications by Das S., Mozumder Y. H., Bandyopadhyay T. K., Mandal S. - (2023)
Ni modified low alloy high strength steel and a process to produce the same by Kumar S., Sarkar A. , Nayak D. , Bandyopadhyay T. K., Mandal S. - (2020)

Journal

Comprehensive analysis of hot deformation characteristics in high-Mn steel: Sensitivity to temperature and strain rate by Poorna Chander K., Arun Babu K. , Amirthalingam M. , Mandal S. , Singh S. B. Metallurgical and Materials Transactions A 1-25 (Accepted/In-Press)
Improvement in electrochemical behaviour of Ti-6Al-4V alloy by ultrasonic-assisted abrasive peening by Rao S., Bairagi D. , Mandal S. , Chakladar N. D., Paul S. Surface and Coatings Technology 522 133198- (2026)
Improvement in electrochemical behaviour of Ti-6Al-4V alloy by ultrasonic-assisted abrasive peening by Rao S.V.V.N.S., Bairagi D., Mandal S., Chakladar N.D., Paul S. Surface and Coatings Technology 522 - (2026)
Effect of quench- and age-induced grain boundary -phase precipitates on hydrogen environmentally induced cracking (H-EIC) behaviour of AA7085 alloy in humid air by Srivastava J., Curd M.E., Yao Y., Holroyd N.J.H., Shanthraj P., Singh S.B., Mandal S., Prangnell P.B., Burnett T.L. Journal of Materials Science 61 5412-5433 (2026)
Influence of amorphous grain boundaries on radiation induced damage mitigation and its role on mechanical properties in Ni-Nb alloy by Jha R.K., Mandal S. Surfaces and Interfaces 86 - (2026)
Influence of mischmetal content on the microstructure and mechanical properties of stir-squeeze cast Al-RE alloys, Journal of Rare Earths by Kumar C., Bada G. K., Giri A. , Sen M. , Mandal S. , Borra C. R., Roy S. Journal of Rare Earths - (2026)
Kinetics of grain growth: the effect of grain boundary engineering in high-Mn austenitic steel by Kokkula P.C., Ranjan R., Mandal S., Singh S.B. Scripta Materialia 277 - (2026)
A comprehensive study on microstructure evolution and associated damage mechanism in directionally solidified CM247LC superalloy under clockwise diamond and counterclockwise diamond thermomechanical fatigue by Kumar R., Jha R.K., Jayabalan B., Mukherjee S., Krishna E.H., Chatterjee D., Prasad K., Mandal S. Materials Science and Engineering: A 960 - (2026)
Deformation behavior and failure mechanism during in-phase and out-of-phase thermomechanical fatigue in directionally solidified CM247LC superalloy by Kumar R., Patnaik S., Jayabalan B., Mukherjee S., Krishna E.H., Chatterjee D., Prasad K., Mandal S. International Journal of Fatigue 203 - (2026)
Effect of ultrasonic-assisted abrasive peening on near-surface characteristics and electrochemical behaviour of Al-6061 alloy by Rao S., Bairagi D. , Mandal S. , Chakladar N. D., Paul S. Corrosion Science 242 112563- (2025)
Kinetics of pearlite transformation: The effect of grain boundary engineering by Kokkula P.C., Samanta S., Mandal S., Singh S.B. Acta Materialia 284 - (2025)
Role of site-specific solute segregation and structural transition on grain boundary diffusion in Ni-Nb alloy by Jha R.K., Kumar R., Mandal S. Journal of Applied Physics 137 - (2025)
Deformation behavior and the extent of crack propagation in a hot-rolled Ni added multiphase lightweight steel: A microstructure and micro-texture perspective by Ghosh D., Kumar S., Jayabalan B., Mukherjee S., Mandal S. Materials Science and Engineering: A 948 - (2025)
Unravelling the effect of diverse microstructural features on nano-mechanical properties and multiple pop-in behaviours in a multiphase lightweight steel by Ghosh D., Kumar S., Jayabalan B., Mukherjee S., Mandal S. Journal of Materials Science 60 16364-16392 (2025)
Elucidating the deformation behaviour of DX54 steel under a continuous strain path change by Dhara S., Rakshit R., Hazra S., Mandal S., Panda S.K. Journal of Materials Research and Technology 37 2627-2642 (2025)
Unveiling the Correlation among Microstructure, Texture, Slip System Activity, and Tensile Property in a Hot Rolled Ni Containing Medium-Mn Steel by Kumar S., Ghosh D., Rakshit R., Mukherjee S., Mandal S. Steel Research International 96 - (2025)
Implications of the microstructure on strength-ductility synergy in a novel B2-strengthened medium manganese advanced high strength steel by Das S., Kumar S., Pradhan S.K., Bandyopadhyay T.K., Mandal S. Materials Science and Engineering: A 924 - (2025)
Enhanced strength-ductility synergy in a rare-earth free Mg alloy for bio-implant application: Insights into the role of bimodal microstructure and slip activity by Bairagi D., Rakshit R., Kumar R., Jayabalan B., Mukherjee S., Paliwal M., Mandal S. Materials Science and Engineering: A 929 - (2025)
The Influence of Partially Recrystallized Grain Structures on Hydrogen Environmentally Induced Cracking (H-EIC) Behavior of AA7085 Alloy in Humid Air by Srivastava J., Card M. E., Euesden R. , Yao Y. , Garner A. , Singh S. B., Mandal S. , Burnett T. L., Prangnell P. B. Corrosion Science 256 - (2025)
Melting phenomenon in Cu-Al joining using a novel friction processing technique: A molecular dynamics study by Maity D., Jha R.K., Mandal S., Racherla V. Materials Today Communications 42 111354- (2025)
Grain boundary engineering for improved performance: A case study with Ni-superalloy on the hydrogen evolution reaction by Bhuyan P., Sanyal S., Fortunato G.V., Mandal S., Mingers A.M., Ledendecker M. Materials and Design 260 - (2025)
Insights into the corrosion mechanisms in a multiphase medium-manganese steel in marine environment: Experimental study and density functional theory simulations by Kumar S., Bairagi D. , Adhikary T. , Durga Prasad A. , Jayabalan B. , Mukherjee S. , Mandal S. Materials Today Communications 46 112640- (2025)
Insights into the corrosion mechanisms in a multiphase medium-manganese steel in marine environment: Experimental study and density functional theory simulations by Kumar S., Bairagi D., Adhikary T., Prasad A.D., Jayabalan B., Mukherjee S., Mandal S. Materials Today Communications 46 - (2025)
Microstructural characterization, formability and failure analyses of novel Ni-modified advanced high strength steel during stretch forming process by Das S., Behera D. , Rakshit R. , Panda S. K., Bandyopadhyay T. K., Mandal S. Materials Today Communications 49 114308- (2025)
A machine learning-based framework for predicting the solute segregation energy in bicrystal and nanocrystalline grain boundaries by Jha R.K., Kumar R., Varsheni R.S., Mandal S. Journal of Materials Science 60 23502-23525 (2025)
Effect of Ce concentration on in-vitro bio-corrosion and cytocompatibility of Mg 1Mn xCe alloys by Patnaik S., Bairi L.R., Bairagi D., Kumar R., Paliwal M., Palit M., Mandal S. Metals and Materials International - (2025)
Effect of microstructural evolution on the corrosion and passive film behavior of metastable ? Ti-5Al-5V-5Mo-3Cr alloy by Arohi A.C., Bairi L.R., Mandal S., Sen I. Materials Today Communications 48 - (2025)
Cyclic deformation behavior and micro-mechanism of crack initiation during thermomechanical fatigue in an intermediate temperature range (573 K 723 K) in Timetal 834 alloy by Kumar R., Bhagyaraj J. , Hari Krishna E. , Mukherjee S. , Prasad K. , Mandal S. International Journal of Fatigue 197 108924- (2025)
Effect of Thermomechanical Processing Induced Retained Strain on In Vitro, In Vivo Biodegradation Response and Cytocompatibility of Mg Alloy by Bairagi D., Mandal S. , Hoque S. , Ghosh D. , Nandi S. K., Mondal S. , Roy M. , Paliwal M. , Mandal S. ACS Biomaterials Science & Engineering 10 6191-6209 (2024)
Nanoscale visualization of high-angle misorientations in quartz-rich rocks using SEM-EBSD and Atomic Force Microscopy by Dey S., Chatterjee S. , Ritanjali S. R., Dobe R. , Mukherjee R. , Mandal S. , Gupta S. Journal of Structural Geology 183 105146- (2024)
Implication of site-specific segregation on grain boundary structural transition and deformation response in nanocrystalline Ni-Nb alloy by Jha R. K., Kumar R. , Dutta A. , Mandal S. Comp. Mater. Sci. 233 1-16 (2024)
Enhanced in-vitro degradation resistance and cytocompatibility of a thermomechanically processed novel Mg alloy: Insights into the role of microstructural attributes by Bairagi D., Mandal S., Roy M., Paliwal M., Mandal S. Journal of Magnesium and Alloys 12 700-725 (2024)
Influence of pre-strain on nano-scale elasto-plastic response and dislocation activities in Ni added multiphase lightweight steel: Experimental and simulation approaches by Ghosh D., Kumar S., Jha R.K., Mozumder Y.H., Mandal S. Materialia 34 1-16 (2024)
Influence of strain rate on the work hardening, strain induced martensite formation, strain partitioning, and variant selection in a medium-Mn steel by Patra A.K., Kapoor R., Mandal S., Hari Kumar K.C., Vadlamani S.S. Materials Science and Engineering: A 902 - (2024)
Microbially induced corrosion issues in the underground buried crude oil and natural gas bearing pipelines: A review by Bairi L.R., Bhuyan P., Ghosh A., Narang M., Mandal S. Materials and Corrosion 75 197-211 (2024)
Microstructure Evolution in a Cast and Homogenized Nd-Fe-B-Cu Alloy: Experimental Study and Thermodynamic Calculations by Patnaik S., Kumar R., Pal V., Paliwal M., Palit M., Mandal S. JOM 76 5324-5331 (2024)
Deformation and damage mechanisms during clockwise diamond and counter clockwise diamond thermomechanical fatigue in Timetal 834 alloy by Kumar R., Sanyal S., Bhagyaraj J., Hari Krishna E., Mukherjee S., Prasad K., Mandal S. International Journal of Fatigue 179 1-18 (2024)
High temperature air and steam oxidation and fireside corrosion behavior of 304HCu stainless steel: dichotomous role of grain boundary engineering by Sanyal S., Bhuyan P. , Karthikeyan R. , Alroy R. , Siva Kumar G. , Mandal S. , Kamaraj M. , Seshadri S. , Sarma V. S. High Temperature Corrosion of Materials 101 143-168 (2024)
High temperature uniaxial deformation characteristics in Al-Li alloy: insights into the perspective of microstructure, microtexture and slip system activity by Rakshit R., Sudarsan C. , Panda S. K., Mandal S. Materialia 34 1-13 (2024)
Comprehending the correlation between microstructural features and wear performance in multiphase lightweight steels by Soren A., Ghosh D. , Kumar S. , Mandal S. Materials Letters 352 1-5 (2023)
Excellent strength-ductility synergy in a novel medium manganese steel containing 2.4Al-2.9Mn-4.1Ni realized through limited thermo-mechanical processing steps by Kumar S., Rakshit R. , Durga Prasad A. , Jayabalan B. , Mukherjee S. , Mandal S. Materials Science and Engineering: A 883 1-16 (2023)
On the role of grain size variation on pitting corrosion and passive film behavior of Alloy 600H by Kaithwas C. K., Bairi L. R., Mozumder Y. H., Pradhan S. K., Mandal S. Materials and Corrosion 74 929-942 (2023)
Controlled nano Cu precipitation through age treatment: A method to enhance the biodegradation, mechanical, antimicrobial properties and biocompatibility of Fe-20Mn-3Cu alloys by Mandal S., Vvngsv Kishore A. , Mandal S. , Bhar B. , Mandal B. B., Nandi S. K., Roy M. Acta Biomaterialia 168 650-669 (2023)
Unveiling the corrosion perspective of Al-Si alloy/SiC foam interpenetrating phase composite by Bhuyan P., Kota N. , Bairagi D. , Sahasrabudhe S. , Roy S. , Mandal S. Materials Today Communication 35 105495- (2023)
Implication of Nano-Scale Grain Refinement on the Passive Film Formation and Corrosion Response of AISI 301L Steel with and without Pre-Existing Martensite by Surya Prakash N., Mandal S. , Mandal S. , Chakrabarti D. , Roy M. Materials Letters 336 1-5 (2023)
Assessing the implication of homogenization and hard-plate hot forging induced microstructural evolution on corrosion response of a cast Mg-2Zn-1Nd alloy by Bhuyan P., Bairagi D. , Kumar R. , Paliwal M. , Mandal S. Materials Today Communications 37 1-11 (2023)
A finite element coupled visco-plastic self-consistent simulation to predict micro-texture and anisotropy evolution during single point incremental forming in Al-Li alloy by Rakshit R., Katiyar B. S., Tomé C. N., Panda S. K., Mandal S. Journal of Materials Processing Technology 312 117834- (2023)
Microstructural, Mechanical, and Corrosion Performance of Components Fabricated through Wire Arc Additive Manufacturing Process by Sudarsan C., Katiyar B. S., Behera D. R., Rakshit R. , Rajak B. , Perka A. K., Arora K. S., Mandal S. , Panda S. K. Journal of Materials Engineering and Performance 1-15 (2023)
Influence of strain path dependent microstructural evolution on corrosion behaviour in Al-Li alloy by Rakshit R., Bairagi D. , Panda S. K., Mandal S. Materials Letters 348 1-5 (2023)
Insights into the role of Nb segregation on grain boundary structural transition and mechanical deformation behavior in a Ni-Nb binary system by Jha R. K., Bhuyan P. , Mandal S. , Pal S. Materials Chemistry and Physics 299 127531- (2023)
Influence of out-of-plane stretch forming induced different strain paths on micro-texture evolution, slip system activity and Taylor factor distribution in Al Li alloy by Rakshit R., Sarkar A., Panda S.K., Mandal S. Materials Science and Engineering A 830 - (2022)
Oxide scale characterization and modeling of oxidation kinetics in T91 steel exposed to dry air at high temperatures (873-1073 K) by Das S., Sanyal S. , Halder P. , Varma A. , Ravi Kumar Y. , Mandal S. Metals and Materials International 28 1864-1880 (2022)
Insights into the effect of different thermomechanical processing on the microstructure, phases, texture and tensile properties in Mg-0.9Al-0.6Mn-0.2Si-0.1Ca alloy by Sanyal S., Bhuyan P. , Bandyopadhyay T. , Mandal S. Intermetallics 146 107564- (2022)
Superior strength-ductility combination in a Ni-modified medium manganese lightweight steel with the determining role of phase transformation and recrystallization behaviour by Kumar S., Sarkar A., Prasad A.D., Paliwal M., Mukherjee S., Mandal S. Materials Science and Engineering A 835 - (2022)
Uniaxial tensile deformation behaviour of electron beam welded commercially pure titanium and Ti6Al4V joints: Experimental and metallurgical characterization by Lin Prakash P.S., Rakshit R., Mandal S., Roy G.G., Panda S.K. Journal of Manufacturing Processes 76 444-456 (2022)
Grain size dependant high-temperature hot corrosion (HTHC) degradation behaviour in Alloy 617 during exposure in Na2SO4 + NaCl + V2O5 salt mixture by Bhuyan P., Sanyal S. , Mitra R. , Mandal S. Journal of the alloys and compounds 914 165262.1-165262.14 (2022)
A novel approach combining grain boundary engineering and grain boundary serration to enhance high-temperature hot corrosion resistance in Alloy 617 by Bhuyan P., Sanyal S. , Sarma V. S., Boer B. D., Mitra R. , Mandal S. Materialia 23 101451-101451 (2022)
Multiscale precipitate evolution and its implications on the tensile deformation behavior in thermomechanically processed and peak-aged lean Mg-Al-Ca-Mn alloy by Sanyal S., Bhuyan P., Bandyopadhyay T.K., Mandal S. Materialia 26 101566- (2022)
Nano-mechanical properties and onset of plasticity in Fe Mn Al Ni C duplex lightweight steel processed by high temperature compression by Mozumder Y.H., Rakshit R., Ghosh D., Marandi L., Mandal S. Materials Science and Engineering A 849 - (2022)
A comprehensive review on biocompatible Mg-based alloys as temporary orthopaedic implants: Current status, challenges, and future prospects by Bairagi D., Mandal S. Journal of Magnesium and Alloys 10 627-669 (2022)
Implication of initial grain size on DRX mechanism and grain refinement in super-304H SS in a wide range of strain rates during large-strain hot deformation by Arun Babu K., Mozumder Y.H., Athreya C.N., Sarma V.S., Mandal S. Materials Science and Engineering A 832 - (2022)
Implications of second phase precipitates evolved through optimized homogenization treatment on mechanical and in-vitro corrosion behaviour of Mg-4Zn-0.5Ca-0.8Mn alloy by Bairagi D., Duley P. , Paliwal M. , Mandal S. Journal of Magnesium and Alloys - (2022)
Effect of long-term immersion on the corrosion and passivation behavior of lean duplex stainless steel 2101 in 3.5 wt. % NaCl solution by Bairi L. R., Bairagi D. , Duley P. , Mandal S. Metals and Materials International - (2022)
Comprehending the role of individual microstructural features on electrochemical response and passive film behaviour in type 304 austenitic stainless steel by Pradhan S.K., Bhuyan P., Bairi L.R., Mandal S. Corrosion Science 180 109187- (2021)
High strength-high ductility medium Mn steel obtained through CALPHAD based alloy design and thermomechanical processing by Patra A.K., Athreya C.N., Mandal S., Hari Kumar K.C., Subramanya Sarma V. Materials Science and Engineering A 810 140756- (2021)
Evolution of microstructure, phases and mechanical properties in lean as-cast Mg Al Ca Mn alloys under the influence of a wide range of Ca/Al ratio by Sanyal S., Paliwal M., Bandyopadhyay T.K., Mandal S. Materials Science and Engineering A 800 140322- (2021)
Strain-induced microstructural evolution and its implication on high-temperature hot corrosion (HTHC) phenomena in Alloy 617 by Bhuyan P., Pradhan S. K., Mitra R. , Mandal S. Materials Characterization 178 111272- (2021)
Effect of microstructural evolution and texture change on the in-vitro bio-corrosion behaviour of hard-plate hot forged Mg-4Zn-0.5Ca-0.16Mn (wt%) alloy by Duley P., Bairagi D., Bairi L.R., Bandyopadhyay T.K., Mandal S. Corrosion Science 192 - (2021)
Precipitate evolution during aging and its individual role on high-temperature hot corrosion response in Alloy 617 by Bhuyan P., Paliwal M., Sarma V.S., de Boer B., Mitra R., Mandal S. Journal of Alloys and Compounds 871 159499- (2021)
Effect of spheroidized microstructure on the impact toughness and electrochemical performance of a high-carbon steel by Bairagi D., Munukuti V., Bhuyan P., Saha R., Mandal S. Materials and Corrosion 72 829-838 (2021)
Deformation mechanism and nano-scale interplay of dual precipitation during compressive deformation of a duplex lightweight steel at high strain rate by Mozumder Y. H., Arun Babu K. , Saha R. , Mandal S. Materials Science and Engineering A 823 141725- (2021)
Implications of annealing treatments on microstructure, texture, and tensile properties of hard plate hot forged Mg-Zn-Ca-Mn alloy by Duley P., Sanyal S. , Bandyopadhyay T. K., Mandal S. Materials Characterization 172 110885- (2021)
Microstructural evolution and its implications on the mechanical properties during age hardening in Mg-1Al-0.28Ca-0.13Mn-0.05Si alloy by Sanyal S., Gabhale O.G., Bandyopadhyay T.K., Mandal S. Journal of Alloys and Compounds 861 158540- (2021)
Grain boundary engineering and its implications on corrosion behavior of equiatomic CoCrFeMnNi high entropy alloy by Thota H., Jeyaraam R., Bairi L.R., Tirunilai A.S., Kauffmann A., Freudenberger J., Heilmaier M., Mandal S., Vadlamani S.S. Journal of Alloys and Compounds 888 - (2021)
Enhanced corrosion resistance of surface nanostructured Ti-13Nb-13Zr alloy by Kumar P., Mahobia G. , Mandal S. , Singh V. , Chattopadhyay K. Corrosion Science 189 109597- (2021)
Modeling and simulation of dynamic recrystallization in super austenitic stainless steel employing combined cellular automaton, artificial neural network and finite element method by Arun Babu K., Prithiv T.S., Gupta A., Mandal S. Computational Materials Science 195 110482- (2021)
Implications of grain size distribution, precipitate evolution and texture development on tensile properties in hard plate hot forged and annealed Mg-Zn-Ca-Mn alloy by Duley P., Sanyal S. , Bandyopadhyay T. K., Mandal S. Materials Science and Engineering A 784 139288- (2020)
A comprehensive study on texture development and twin related domain evolution following hot compression in a super austenitic stainless steel by Arun Babu K., Athreya C. N., Mozumder Y. H., Sarma V. S., Mandal S. Metallurgical and Materials Transactions A 51 3535-3551 (2020)
A potential insight into the serration behaviour of sigma 3n (n less than equal to 3) boundaries in Alloy 617 by Bhuyan P., Reddy K. V., Pradhan S. K., Pal S. , Mitra R. , Mandal S. Materials Chemistry and Physics 248 122919- (2020)
Hall-Petch type of relationship between the extent of intergranular corrosion and grain size in a Ni-based superalloy by Kaithwas C.K., Bhuyan P., Pradhan S.K., Mandal S. Corrosion Science 175 108868- (2020)
Assessing the potential of sparsely nucleated recrystallized grains to lead grain boundary engineering during extending annealing in Alloy 600H by Kaithwas C.K., Bhuyan P., Mandal S. Materials Characterization 168 110538- (2020)
Compressive flow behaviour and deformation instabilities of Fe-Mn-Al-Ni-C lightweight duplex steel by Mozumder Y. H., Arun Babu K. , Mandal S. Transactions of the INAE 5 465-474 (2020)
Dynamic microstructural evolution and recrystallization mechanism during hot deformation of intermetallic-hardened duplex lightweight steel by Mozumder Y. H., Arun Babu K. , Saha R. , Sarma V. S., Mandal S. Materials Science and Engineering A 788 139613- (2020)
Influence of hard plate hot forging temperature on the microstructure, texture and mechanical properties in a lean Mg Zn Al alloy by Sanyal S., Kanodia S. , Saha R. , Bandyopadhyay T. K., Mandal S. Journal of Alloys and Compounds 800 343-354 (2019)
Influence of the individual microstructural features on pitting corrosion in type 304 austenitic stainless steel by Pradhan S. K., Bhuyan P. , Mandal S. Corrosion Science 158 108091- (2019)
A systematic assessment of various stability/instability criteria in predicting the hot deformation-related instabilities in super-304H stainless steels by Arun Babu K., Mozumder Y. H., Saha R. , Mandal S. Journal of Materials Engineering and Performance 28 4718-4730 (2019)
Evaluating the efficacy of grain boundary serrations in attenuating high-temperature hot corrosion degradation in Alloy 617 by Bhuyan P., Pradhan S. K., Mitra R. , Mandal S. Corrosion Science 149 164-177 (2019)
Recrystallization behavior and tensile properties of Al-added medium-Mn-steel at different deformation-annealing conditions by Sarkar A., Sanyal S. , Bandyopadhyay T. K., Mandal S. Materials Science and Technology 35 2054-2068 (2019)
Homogenization-induced age-hardening behavior and room temperature mechanical properties of Mg-4Zn-0.5Ca-0.16Mn (wt%) alloy by Duley P., Sanyal S. , Bandyopadhyay T. K., Mandal S. Materials & Design 164 1-16 (2019)
Role of grain boundary engineered microstructure on high temperature steam oxidation behaviour of Ni based superalloy Alloy 617 by Athreya C. N., Deepak K. , Kim D. , De Boer B. , Mandal S. , Sarma V. S. Journal of Alloys and Compounds 778 224-233 (2019)
Implications of microstructure, Taylor factor distribution and texture on tensile properties in a Ti-added Fe-Mn-Al-Si-C steel by Sarkar A., Sanyal S. , Bandyopadhyay T. K., Mandal S. Materials Science and Engineering A 767 138402- (2019)
Hot-workability of super-304H exhibiting continuous to discontinuous dynamic recrystallization transition by Arun Babu K., Mozumder Y. H., Saha R. , Sarma V. S., Mandal S. Materials Science and Engineering A 734 269-280 (2018)
Correlating the five parameter grain boundary character distribution and the intergranular corrosion behaviour of a stainless steel using 3D orientation microscopy based on mechanical polishing serial sectioning by An D., Griffiths T. A., Konijnenberg P. , Mandal S. , Wang Z. , Zaefferer S. Acta Materialia 156 297-309 (2018)
Microstructure engineering by dispersing nano-spheroid cementite in ultrafine-grained ferrite and its implications on strength-ductility relationship in high carbon steel by Prasad C., Bhuyan P., Kaithwas C., Saha R., Mandal S. Materials and Design 139 324-335 (2018)
Microstructure engineering by dispersing nano-spheroid cementite in ultrafine-grained ferrite and its implications on strength-ductility relationship in high carbon steel by Prasad C., Bhuyan P. , Kaithwas C. K., Saha R. , Mandal S. Materials & Design 139 324-335 (2018)
Microstructure evolution during low-strain thermo-mechanical processing and its repercussion on intergranular corrosion in alloy 600H by Kaithwas C. K., Bhuyan P. , Pradhan S. K., Mandal S. Materials Characterization 145 582-593 (2018)
Flow characteristics and hot workability studies of a Ni-containing Fe-Mn-Al-C lightweight duplex steel by Mozumder Y. H., Arun Babu K. , Saha R. , Mandal S. Materials Characterization 146 1-14 (2018)
Individual and synergistic influences of microstructural features on intergranular corrosion behavior in extra-low carbon type 304L austenitic stainless steel by Pradhan S. K., Bhuyan P. , Mandal S. Corrosion Science 139 319-332 (2018)
Strain-annealing-based grain boundary engineering to evaluate its sole implication on intergranular corrosion in extra-low-carbon type 304L austenitic stainless steel by Pradhan S. K., Bhuyan P. , Kaithwas C. K., Mandal S. Metallurgical and Materials Transactions A 49 2817-2831 (2018)
Development and characterization of a novel Ti modified high Si-medium Mn steel possessing ultra-high strength and reasonable ductility after hot rolling by Kisku N., Sarkar A. , Ray K. K., Mandal S. Journal of Materials Engineering & Performances 27 4077-4089 (2018)
A critical evaluation on efficacy of recrystallization vs. strain induced boundary migration in achieving grain boundary engineered microstructure in a Ni-base superalloy by Prithiv T. S., Bhuyan P. , Pradhan S. K., Sarma V. S., Mandal S. Acta Materialia 146 187-201 (2018)
Phenomenological constitutive modeling of high-temperature flow behavior incorporating individual and coupled effects of processing parameters in super-austenitic stainless steel by Roy S., Biswas S. , Arun Babu K. , Mandal S. Journal of Materials Engineering & Performances 27 3762-3772 (2018)
Regression based novel constitutive analyses to predict high temperature flow behavior in super austenitic stainless steel by Arun Babu K., Mandal S. Materials Science and Engineering A 703 187-195 (2017)
A comparative assessment of fatigue deformation behavior of 316 LN SS at ambient and high temperature by Goyal S., Mandal S. , Parameswaran P. , Sandhya R. , Athreya C. N., Laha K. Materials Science and Engineering A 696 407-415 (2017)
Enhanced strength-ductility relationship in a medium Mn high Al-alloyed multi component steel through thermomechanical processing by Sarkar A., Sanyal S. , Bandyopadhyay T. K., Mandal S. Materials Science and Engineering: A 703 205-213 (2017)
Hot deformation characteristics and processing map of a phosphorous modified super austenitic stainless steel by Arun Babu K., Mandal S. , Athreya C. N., Shakthipriya B. , Sarma V. S. Materials and Design 115 262-275 (2017)
Through-thickness microstructural evolution during grain boundary engineering type thermomechanical processing and its implication on sensitization behavior in austenitic stainless steel by Pradhan S. K., Prithiv T. S., Mandal S. Materials Characterization 134 134-142 (2017)
Influence of annealing parameters on phase evolution and recrystallization kinetics of a Mn-Al-Si alloyed duplex steel by Sarkar A., Sanyal S. , Bandyopadhyay T. K., Mandal S. Materials Characterization 134 213-224 (2017)
Influence of processing parameters on dynamic recrystallization and the associated annealing twin boundary evolution in a nickel base superalloy by Pradhan S. K., Mandal S. , Athreya C. N., Arun Babu K. , Deboer B. , Sarma V. S. Materials Science and Engineering A Materials Science and Engineering A 49-58 (2017)
Implication of grain boundary engineering on high temperature hot corrosion of alloy 617 by Deepak K., Mandal S. , Athreya C. , Kim D. , Deboer B. , Sarma V. Corrosion Science 106 293-297 (2016)
Characterization of hot deformation behavior of alloy 617 through kinetic analysis, dynamic material modeling and microstructural studies by Arun Babu K., Mandal S. , Kumar A. , Athreya C. N., De Boer B. , Sarma V. S. Materials Science and Engineering A 664 177-187 (2016)
Role of carbide precipitates and process parameters on achieving grain boundary engineered microstructure in a Ni-based superalloy by Shyam Swaroop K., Mandal S. , Athreya C. N., Deboer B. , Sarma V. S. Metallurgical and Materials Transactions A 46 4740-4754 (2015)
Dynamic strain-induced transformation: An atomic scale investigation by Zhang H., Pradeep K. G., Mandal S. , Ponge D. , Springer H. , Raabe D. Scripta Materialia 109 23-27 (2015)
New insights into the austenitization process of low-alloyed hypereutectoid steels: Nucleation analysis of strain-induced austenite formation by Zhang H., Pradeep K. , Mandal S. , Ponge D. , Raabe D. Acta Materialia 80 296-308 (2014)
New insights into the relationship between dynamic softening phenomena and efficiency of hot working domains of a nitrogen enhanced 316L (N) stainless steel by Samantaray D., Mandal S. , Jayalakshmi M. , Athreya C. , Bhaduri A. , Sarma V. Materials Science and Engineering A 598 368-375 (2014)
Effect of strain rate on dynamic recrystallization behaviour in a nitrogen enhanced 316L(N) by Mandal S., Jayalakshmi M. , Bhaduri A. , Sarma V. Metallurgical and Materials Transactions A 45 5645-5656 (2014)
Enhanced superplasticity in an Al-alloyed multicomponent Mn-Si-Cr-C steel by Zhang H., Pradeep K. , Mandal S. , Ponge D. , Choi P. , Tasan C. , Raabe D. Acta Materialia 63 232-244 (2014)
A novel approach to measure grain boundary segregation in bulk polycrystalline materials in dependence of the boundaries five rotational degrees of freedom, by Mandal S., Pradeep K. , Zaefferer S. , Raabe D. Scripta Materialia 81 16-19 (2014)
Resisting stress for constitutive analysis of hot deformation in modified 9Cr 1Mo (P91) steel by Samantaray D., Phaniraj C. , Bhaduri A. , Mandal S. , Albert S. Materials Science and Engineering: A 560 170-177 (2013)
Thermally activated deformation of a high-nitrogen grade 316LN stainless steel under compressive loading by Samantaray D., Mandal S. , Albert S. , Bhaduri A. , Jayakumar T. Materials Science Forum 710 477-482 (2012)
Influence of state of stress on dynamic recrystallization in a titanium-modified austenitic stainless steel by Mandal S., Bhaduri A. , Sarma V. Metallurgical and Materials Transactions A 43 410-414 (2012)
Dynamic recrystallisation during isothermal hot deformation in a titanium modified austenitic stainless steel by Mandal S., Bhaduri A. , Raj B. , Sarma V. Materials Science Forum 715-716 140-145 (2012)
Role of twinning on dynamic recrystallization and microstructure during moderate to high strain rate hot deformation of a Ti modified austenitic stainless steel by Mandal S., Bhaduri A. , Sarma V. Metallurgical and Materials Transactions A 43 2056-2068 (2012)
Optimization of processing parameters based on high temperature flow behavior and microstructural evolution of a nitrogen enhanced 316L (N) stainless steel by Samantaray D., Mandal S. , Kumar V. , Albert S. , Bhaduri A. , Jayakumar T. Materials Science and Engineering A 552 236-244 (2012)
Origin and role of sigma 3 boundaries during thermo-mechanical processing of a Ti-modified austenitic stainless steel by Mandal S., Bhaduri A. , Sarma V. Materials Science Forum 702 714-717 (2012)
Strain dependent rate equation to predict elevated temperature flow behavior of modified 9Cr-1Mo (P91) steel by Samantaray D., Phaniraj C. , Mandal S. , Bhaduri A. Materials Science and Engineering A 528 1071-1077 (2011)
A critical comparison of various data processing methods in simple uni-axial compression testing by Samantaray D., Mandal S. , Bhaduri A. Materials & Design 32 2797-2802 (2011)
Analysis and mathematical modelling of elevated temperature flow behaviour of austenitic stainless steels by Samantaray D., Mandal S. , Bhaduri A. , Venugopal S. , Sivaprasad P. Materials Science and Engineering: A 528 1937-1943 (2011)
A new relationship between the stress multipliers of Garofalo equation for constitutive analysis of hot deformation in modified 9Cr 1Mo (P91) steel by Phaniraj C., Samantaray D. , Mandal S. , Bhaduri A. Materials Science and Engineering A 528 6066-6071 (2011)
One-step and iterative thermo-mechanical treatments to enhance sigma 3n boundaries in a Ti-modified austenitic stainless steel by Mandal S., Bhaduri A. , Sarma V. Journal of Materials Science 46 275-284 (2011)
Optimization of hot working parameters for thermo-mechanical processing of modified 9Cr 1Mo (P91) steel employing dynamic materials model by Samantaray D., Mandal S. , Bhaduri A. Materials Science and Engineering A 528 5204-5211 (2011)
A study on microstructural evolution and dynamic recrystallization during isothermal deformation of a Ti-modified austenitic stainless steel by Mandal S., Bhaduri A. , Sarma V. Metallurgical and Materials Transactions A 42 1062-1072 (2011)
Flow behavior and microstructural evolution during hot deformation of AISI Type 316 L(N) austenitic stainless steel by Samantaray D., Mandal S. , Phaniraj C. , Bhaduri A. Materials Science and Engineering A 528 8565-8572 (2011)
Characterization of deformation instability in modified 9Cr 1Mo steel during thermo-mechanical processing by Samantaray D., Mandal S. , Bhaduri A. Materials & Design 32 716-722 (2011)
An overview on constitutive modelling to predict elevated temperature flow behaviour of fast reactor structural materials by Samantaray D., Mandal S. , Bhaduri A. , Sivaprasad P. Transactions of the Indian Institute of Metals 63 823-831 (2010)
Grain boundary engineering in alloy D9 through thermo-mechanical processing: influence of process variables and aspects of micro-mechanisms by Mandal S., Bhaduri A. , Sarma V. International Journal of Advances in Engineering Sciences and Applied Mathematics 2 149-160 (2010)
Constitutive analysis to predict high-temperature flow stress in modified 9Cr 1Mo (P91) steel by Samantaray D., Mandal S. , Bhaduri A. Materials & Design 31 981-984 (2010)
Dynamic recrystallization in a Ti modified austenitic stainless steel during high strain rate deformation by Mandal S., Sivaprasad P. , Sarma V. Materials and Manufacturing Processes 25 54-59 (2010)
Effect of different environmental parameters on pitting behavior of AISI type 316L stainless steel: Experimental studies and neural network modeling by Ramana K., Anita T. , Mandal S. , Kaliappan S. , Shaikh H. , Sivaprasad P. , Dayal R. , Khatak H. Materials & Design 30 3770-3775 (2009)
A comparative study on Johnson Cook, modified Zerilli Armstrong and Arrhenius-type constitutive models to predict elevated temperature flow behaviour in modified 9Cr 1Mo steel by Samantaray D., Mandal S. , Bhaduri A. Computational Materials Science 47 568-576 (2009)
An overview of neural network based modeling in alloy design and thermomechanical processing of austenitic stainless steels by Mandal S., Sivaprasad P. , Barat P. , Raj B. Materials and Manufacturing Processes 24 219-224 (2009)
Artificial neural network modeling to evaluate and predict the deformation behavior of stainless steel type AISI 304L during hot torsion by Mandal S., Sivaprasad P. , Venugopal S. , Murthy K. Applied Soft Computing 9 237-244 (2009)
A thermo-viscoplastic constitutive model to predict elevated-temperature flow behaviour in a titanium-modified austenitic stainless steel by Samantaray D., Mandal S. , Borah U. , Bhaduri A. , Sivaprasad P. Materials Science and Engineering A 526 1-6 (2009)
Studies on twinning and grain boundary character distribution during anomalous grain growth in a Ti-modified austenitic stainless steel by Mandal S., Bhaduri A. , Sarma V. Materials Science and Engineering A 515 134-140 (2009)
Constitutive equations to predict high temperature flow stress in a Ti-modified austenitic stainless steel by Mandal S., Rakesh V. , Sivaprasad P. , Venugopal S. , Kasiviswanathan K. Materials Science and Engineering A 500 114-121 (2009)
Evolution and characterization of dynamically recrystallized microstructure in a Ti modified austenitic stainless steel using ultrasonic and EBSD techniques by Mandal S., Mishra S. , Kumar A. , Samajdar I. , Sivaprasad P. , Jayakumar T. , Raj B. Philosophical Magazine 88 883-897 (2008)
Grain boundary microstructural control through thermo-mechanical processing in a Titanium modified austenitic stainless steel by Mandal S., Sivaprasad P. , Raj B. , Sarma V. Metallurgical and Materials Transactions A 39 3298-3307 (2008)
Artificial neural network modeling of composition process property correlations in austenitic stainless steels by Mandal S., Sivaprasad P. , Venugopal S. , Murthy K. , Raj B. Materials Science and Engineering A 485 571-580 (2008)
Kinetics, mechanism and modelling of microstructural evolution during thermomechanical processing of a 15Cr 15Ni 2.2 Mo Ti modified austenitic stainless steel by Mandal S., Sivaprasad P. , Dube R. Journal of materials science 42 2724-2734 (2007)
Modeling microstructural evolution during dynamic recrystallization of alloy D9 using artificial neural network by Mandal S., Sivaprasad P. , Dube R. Journal of Materials Engineering and Performance 16 672-679 (2007)
Capability of a feed-forward artificial neural network to predict the constitutive flow behavior of as cast 304 stainless steel under hot deformation by Mandal S., Sivaprasad P. , Venugopal S. Journal of Engineering Materials and Technology 129 242-247 (2007)
Characterisation of microstructural evolution during thermomechanical processing of 15Cr 15Ni 2·2Mo Ti modified austenitic stainless steel (alloy D9) using ultrasonic measurements by Mandal S., Kumar A. , Sivaprasad P. , Jayakumar T. , Raj B. Materials Science and Technology 23 1381-1386 (2007)
Constitutive flow behaviour of austenitic stainless steels under hot deformation: artificial neural network modelling to understand, evaluate and predict by Mandal S., Sivaprasad P. , Venugopal S. , Murthy K. Modelling and Simulation in Materials Science and Engineering 14 1053-1070 (2006)
Modeling the hot deformation behaviour of a 15Cr-15Ni-2.2 Mo-0.3 Ti modified austenitic stainless steel using artificial neural network by Mandal S., Sivaprasad P. , Murthy K. , Raj B. Metals, Materials and Processes 18 159- (2006)
Artificial neural network modelling of the tensile properties of indigenously developed 15 Cr-15 Ni-2. 2 Mo-Ti modified austenitic stainless steel by Sivaprasad P., Mandal S. , Venugopal S. , Narayanan C. , Shanmugam V. , Raj B. Transactions of the Indian Institute of Metals 59 437-445 (2006)

Book Chapter/Section

Dependence of Environmental Sensitivity on Microtexture by Bairagi D., Bhuyan P., Rakshit R., Mandal S. Materials Horizons: From Nature to Nanomaterials Part F605 305-336 (2025)
Advances in Stainless Steels by Mandal S., Kumar S. , Kumar A. , Sivaprasad P. , Samajdar I. , Jayakumar T. , Raj B. Ultrasonic attenuation to characterize dynamically recrystallized microstructure in a 15Cr 15Ni 2.2 Mo Ti modi ed austenitic stainless steel 125-133 (2010)
Applications of Texture Analysis by Mandal S., Sivaprasad P. , Sarma V. Microstructural Modification in a 15Cr 15Ni 2.2 Mo Ti Modified Austenitic Stainless Steel through Twin Induced Grain Boundary Engineering 313-321 (2008)

Conferences

Microstructure evolution and corrosion behaviour of ultrasonic-assisted cavitation and abrasive peened OFHC copper by Rao S., Bairagi D. , Mandal S. , Chakladar N. D., Paul S. AMPT 2024 - (2024)
Experimental and simulation study on hot deformation behavior and dynamic microstructure evolution of super austenitic stainless steel by Arun Babu K., Prithiv T. S., Athreya C. N., Mozumder Y. H., Sarma V. S., Mandal S. 19th International Conference on Textures of Materials (ICOTOM 19) - (2021)
Role of Cr-rich carbide precipitates on the high-temperature hot corrosion (HTHC) in Alloy 617 by Bhuyan P., Mitra R. , Mandal S. 58th National Metallurgists Day and 74th Annual Technical Meeting of Indian Institute of Metals (NMD-ATM 2020) - (2021)
Correlation between microstructure and tensile properties in a novel lean as-cast Mg-0.8Al-0.3Ca-0.4Mn alloy by Sanyal S., Bandyopadhyay T. K., Mandal S. 58th National Metallurgists Day and 74th Annual Technical Meeting of Indian Institute of Metals (NMD-ATM 2020) - (2021)
Mesoscale simulation of the microstructure evolution during hot working in super austenitic stainless steels by Arun Babu K., Prithiv T. S., Gupta A. , Mandal S. 58th National Metallurgists Day and 74th Annual Technical Meeting (NMD-ATM 2020) - (2021)
Effect of cold rolling on the texture and microstructure evolution in a medium-Mn steel by Patra A. K., Athreya C. N., Mandal S. , Hari Kumar K. C., Sarma V. S. 19th International Conference on Texture of Materials (ICOTOM 19) - (2021)
Structure-property relationship in a thermomechanically processed Mg-Zn-Al alloy by Sanyal S., Kanodia S. , Saha R. , Bandyopadhyay T. K., Mandal S. European congress and exhibition on advanced materials and processes (EUROMAT 2019) - (2019)
Oxide scale study in reheater tube of a super critical thermal power plant by Das S., Sanyal S. , Verma A. , Halder P. , Ravi Kumar Y. , Mandal S. National Conference on AUSC Technology (AUSC 2019) - (2019)
Grain boundary serrations: An effective approach to mitigate high-temperature hot corrosion in Inconel 617 by Bhuyan P., Pradhan S. K., Mitra R. , Mandal S. European congress and exhibition on advanced materials and processes (EUROMAT 2019) - (2019)