Indian Institute of Technology Kharagpur |

Conferences

Combined Effect of Charge Rate and Temperature on Battery Health of Electric Vehicles by Mohanty N., Goyal N.K., Naikan V.N.A. Mechanisms and Machine Science 185 405-411 (2026)
Hybrid machine learning models for improved state of health estimation of lithium-ion batteries in electric vehicles by Mohanty N., Goyal N.K., Naikan V.N.A. Materials Research Proceedings 49 39-47 (2025)
Advanced Knee Point Detection and Health Monitoring Technique for Improved Electric Vehicle Battery Safety by Namrata M., Goyal N. K., Achutha V. N. International Conference on Safety, Health and Analytics-Driven Governance for Sustainable Development (SHADG2024) - (2024)
Combined Effect of Charge Rate and Temperature on Battery Health of Electric Vehicles by Mohanty N., Goyal N. K., Naikan V. A. The Unified International Conference on Emerging Technologies in Cyber-Physical Systems and Industrial AI - (2024)
Vibration Analysis Based Analytical Reliability Model for Flexible-Coupling Pins with Parallel-Misalignment by Hussain V. S., Naikan V. A., Iqubal M. I. 14thAnnual International Conference on Industrial Engineering and Operations Management 1-13 (2024)
Risk Analysis of Battery Charging Approaches in Electric Vehicles: A Comparative Safety Assessment. by Naikan V. A., Goyal N. K., Mohanty N. 34th European Safety and Reliability Conference (ESREL 2024) 1-14 (2024)
Hybrid machine learning models for improved state of health estimation of lithium-ion batteries in electric vehicles by Mohanty N., Goyal N. K., Naikan V. A. 22nd ISME International Conference on Recent Advances in Mechanical Engineering for Sustainable Development (ISME 2024) 39-47 (2024)
Effect of Algorithms in Accurate Knee Point Prediction of Lithium-ion Batteries in Electric Vehicles by Mohanty N., Goyal N. K., Naikan V. A. 2024 SeFeT 4th International Conference on Sustainable Energy and Future Electric Transportation 1-4 (2024)
Experimental Finalization of a Suitable Tool Nose Radius and Ranges of Cutting Parameters Based on Failure Modes for Accelerated Degradation Testing of Cutting Tools by Das M., Naikan V. A., Panja S. C. 6th European Conference on Industrial Engineering and Operations Management Lisbon, Portugal, July 18-20, 2023 - (2023)
Series Arc Fault Detection in Low Voltage Distribution System with Signal Processing and Machine Learning Approach by Gupta A.K., Routray A., Naikan V.N.A. IECON Proceedings (Industrial Electronics Conference) 2021-October - (2021)
Accelerated Failure Time Models with Corrective and Preventive Maintenance for Repairable Systems Subject to Imperfect Repair by Syamsundar A., Naikan V.N.A., Couallier V. Lecture Notes in Mechanical Engineering 143-152 (2020)
An integrated approach for fuzzy failure mode and effect analysis using fuzzy AHP and fuzzy MARCOS by Boral S., Chaturvedi S.K., Howard I.M., McKee K., Naikan V.N.A. IEEE International Conference on Industrial Engineering and Engineering Management 2020-December 395-400 (2020)
Assessment of Maintenance Effectiveness for Repairable Systems: PM and CM Case Studies by Syamsundar A., Naikan V.N.A. 2020 Asia-Pacific International Symposium on Advanced Reliability and Maintenance Modeling, APARM 2020 - (2020)
Sensitivity of rotor slot harmonics due to inter-turn fault in induction motors through vibration analysis by Anil Kumar T.C., Singh G., Naikan V.N.A. Proceedings of 2018 IEEE International Conference on Power, Instrumentation, Control and Computing, PICC 2018 1-3 (2018)
Sensitivity of rotor slot harmonics due to inter-turn fault in induction motors through vibration analysis by Kumar T. A., Singh G. , Achutha Naikan V. N. 5th Biennial International Conference on Emerging Trends in Engineering, Science and Technology - (2018)
A non intrusive methodology for bearing current detection in PWM inverter fed induction motor drive by Singh G., Anil Kumar T.C., Naikan V.N.A. Proceedings of 2018 IEEE International Conference on Power, Instrumentation, Control and Computing, PICC 2018 1-6 (2018)
A non-intrusive methodology for bearing current detection in PWM inverter fed induction motor drive by Singh G., Kumar T. A., Achutha Naikan V. N. International Conference on Power, Instrumentation, Control and Computing (PICC) - (2018)
Multi-methodological approach for selection of risk mitigation strategy in trucking industry: Truck drivers Perspective by Dadsena K. K., Sarmah S. P., Achutha Naikan V. N. INFORMS Annual Meeting - (2018)
Effective combination of motor fault diagnosis techniques by Gugaliya A., Singh G., Naikan V.N.A. Proceedings of 2018 IEEE International Conference on Power, Instrumentation, Control and Computing, PICC 2018 1-5 (2018)
Effective Combination of Motor Fault Diagnosis Techniques by Gugaliya A., Singh G. , Achutha Naikan V. N. 5th Biennial International Conference on Emerging Trends in Engineering, Science and Technology - (2018)
Effective Combination of Motor Fault Diagnosis Techniques. by Gugaliya A., Singh G. , Achutha Naikan V. N. 5th Biennial International Conference on Emerging Trends in Engineering, Science and Technology - (2018)
IEOM Detroit Conference by Achutha Naikan V. N., V. H. IEOM Detroit Conference - (2016)
International Conference on Power Systems (ICPS) by Achutha Naikan V. N., Anil Kumar T. C., Singh G. - (2016)
International Conference on Power Systems (ICPS) by Achutha V. N., Singh G. , Anil Kumar T. C. International Conference on Power Systems (ICPS) - (2016)

Journal

A comparative analysis of operational planning for battery swapping and fast charging in electric vehicles by Mohanty N., Goyal N.K., Naikan V.N.A. Life Cycle Reliability and Safety Engineering 14 1-17 (2025)
A review of cutting tool life prediction through flank wear monitoring by Das M., Naikan V.N.A., Panja S.C. International Journal of Quality and Reliability Management 42 425-473 (2025)
Reliability analysis of PVD-coated carbide tools during high-speed machining of Inconel 800 by Das M., Naikan V. A., Panja S. C. Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability 239 276-288 (2025)
Investigating Thermal and Charge Rate Effects on Electric Vehicle Battery Degradation by Mohanty N., Goyal N.K., Achutha Naikan V.N. Journal of Dynamics, Monitoring and Diagnostics 4 213-225 (2025)
Reliability analysis of cutting tools using transformed inverse Gaussian process-based wear modelling considering parameter dependence by Das M., Naikan V.N.A., Panja S.C. Probabilistic Engineering Mechanics 78 - (2024)
Reliability analysis of PVD-coated carbide tools during high-speed machining of Inconel 800 by Das M., Naikan V.N.A., Panja S.C. Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability - (2024)
Exploring the Diagnostic Potential of Infrared Thermography for Experimental Assessment of Cavitation and Air Entrainment-induced Faults in Centrifugal Pumps by Goel A.K., Naikan V.N.A. Journal of Applied Fluid Mechanics 17 352-369 (2024)
Exploring the potential of smartphone MEMS sensors for cost-effective rotating machinery speed estimation by Goel A.K., Naikan V.N.A. Sensor Review 44 194-210 (2024)
Partial broken rotor bar fault diagnosis using signal injected and generated Hilbert method by Singh G., Achutha Naikan V. Computers and Electrical Engineering 111 1-15 (2023)
Performance measurement of road freight transportation: A case of trucking industry by Dadsena K. K., Sarmah S. P., Naikan V. A., Mathiyazhagan K. , Sanchez V. Transport Policy 137 125-140 (2023)
Effect of training algorithms in accurate state of charge estimation of lithium-ion batteries using NARX model by Mohanty N., Goyal N. K., Naikan V. A. International Journal of Heavy Vehicle Systems 30 232-254 (2023)
A Methodology for Selection of Condition Monitoring Techniques for Rotating Machinery by Achutha Naikan V. N., Goel A. K., Singh G. International Journal of Prognostics and Health Management, 13 1-20 (2022)
Extended Arithmetic Reduction of Age Models for the Failure Process of a Repairable System by Syamsundar A., Naikan V.N.A., Wu S. Reliability Engineering and System Safety 215 - (2021)
An integrated interval type-2 fuzzy sets and multiplicative half quadratic programming-based MCDM framework for calculating aggregated risk ranking results of failure modes in FMECA by Boral S., Chaturvedi S.K., Howard I., Naikan V.N.A., McKee K. Process Safety and Environmental Protection 150 194-222 (2021)
Estimating maintenance effectiveness of a repairable system under time-based preventive maintenance by Syamsundar A., Naikan V.N.A., Wu S. Computers and Industrial Engineering 156 1072-1078 (2021)
Alternative scales in reliability models for a repairable system by Syamsundar A., Naikan V.N.A., Wu S. Reliability Engineering and System Safety 193 - (2020)
Alternative scales in reliability models for a repairable system by Syamsundar A., Naikan V. A., Wu S. Reliability Engineering and System Safety 193 1-11 (2020)
An integrated approach for fuzzy failure modes and effects analysis using fuzzy AHP and fuzzy MAIRCA by Boral S., Howard I. , Chaturvedi S. K., Mckee K. , Naikan V. A. Engineering Failure Analysis 108 - (2020)
An Integrated Approach for Fuzzy Failure Modes and Effects Analysis using Fuzzy AHP and Fuzzy MAIRCA by Boral S., Chaturvedi S. K., Mckee K. , Naikan V. A. Engineering Failure Analysis 108 104-195 (2020)
A novel hybrid multi-criteria group decision making approach for failure mode and effect analysis: An essential requirement for sustainable manufacturing by Boral S., Haward I. , Chaturvedi S. K., Naikan V. A. Sustainable Production and Consumption 21 14-32 (2020)
A novel hybrid multi-criteria group decision making approach for failure mode and effect analysis: An essential requirement for sustainable manufacturing by Boral S., Howard I. , Chaturvedi S. K., Mckee K. , Achutha V. N. Sustainable Production and Consumption 21 14-32 (2020)
Optimal budget allocation for risk mitigation strategy in trucking industry: An integrated approach by Dadsena K. K., Sarmah S. P., Achutha Naikan V. N., Jena S. K. Transportation Research Part A: Policy and Practice 121 37-55 (2019)
Optimal budget allocation for risk mitigation strategy in trucking industry: An integrated approach by Dadsena K.K., Sarmah S.P., Naikan V.N.A., Jena S.K. Transportation Research Part A: Policy and Practice 121 37-55 (2019)
A Case-Based Reasoning system for fault detection and isolation: a case study on complex gearboxes by Boral S., Chaturvedi S. K., Achutha V. N. Journal of Quality in Maintenance Engineering 25 1-23 (2019)
A novel framework for time dependent availability analysis of degraded systems by Meesala S.R., Naikan V.N.A. International Journal of Recent Technology and Engineering 8 23-26 (2019)
Risk evaluation and mitigation of sustainable road freight transport operation: a case of trucking industry by Kumar Dadsena K., Sarmah S.P., Naikan V.N.A. International Journal of Production Research 57 6223-6245 (2019)
Risk Evaluation and mitigation of sustainable road freight transport operation: A case of trucking industry by Dadsena K. K., Sarmah S. P., Achutha Naikan V. N. International Journal of Production Research 57 6223-6245 (2019)
Risk Evaluation and mitigation of sustainable road freight transport operation: A case of trucking industry by Dadsena K., Sarmah S. P., Achutha V. N. Int Journal of Production Research 57 6223-6245 (2019)
Efficiency monitoring as a strategy for cost effective maintenance of induction motors for minimizing carbon emission and energy consumption by Singh G., Anil Kumar T.C., Naikan V.N.A. Reliability Engineering and System Safety 184 193-201 (2019)
Efficiency monitoring as a strategy for cost effective maintenance of induction motors for minimizing carbon emission and energy consumption by Singh G., Kumar T. A., Naikan V. A. Reliability Engineering & System Safety 184 193-201 (2019)
A hybrid decision making framework for modified failure mode effects and criticality analysis: A case study on process plant induction motors by Gugaliya A., Boral S., Naikan V.N.A. International Journal of Quality and Reliability Management 36 1266-1283 (2019)
A Hybrid Decision Making Framework for Modified Failure Mode Effects and Criticality Analysis: A Case Study on Process Plant Induction Motors by Gagalia A., Boral S. , Achutha Naikan V. N. International Journal of Quality & Reliability Management - (2019)
A model for financial viability of implementation of condition based maintenance for induction motors by Gugaliya A., Naikan V.N.A. Journal of Quality in Maintenance Engineering 26 213-230 (2019)
A model for financial viability of implementation of condition based maintenance for induction motors by Gagalia A., Naikan V. A. Journal of Quality in Maintenance Engineering 26 213-230 (2019)
Speed estimation of rotating machinery using generated harmonics by Singh G., Kumar T.C.A., Naikan V.N.A. Computers and Electrical Engineering 72 420-430 (2018)
Speed Estimation of Rotating Machinery Using Generated Harmonics by Singh G., Achutha Naikan V. N. Computers & Electrical Engineering journal 72 420-430 (2018)
Efficiency monitoring as a strategy for cost effective maintenance of induction motors for minimizing carbon emission and energy consumption by Singh G., Kumar T. A., Achutha Naikan V. N. Reliability Engineering and System Safety 184 193-201 (2018)
Detection of half broken rotor bar fault in VFD driven induction motor drive using motor square current MUSIC analysis by Singh G., Naikan V.N.A. Mechanical Systems and Signal Processing 110 333-348 (2018)
Detection of Half Broken Rotor Bar Fault in VFD Driven Induction Motor Drive Using Motor Square Current MUSIC Analysis by Singh G., Achutha Naikan V. N. Mechanical Systems and Signal Processing 110 333-348 (2018)
Development of virtual lab equipmwnt on cavitation of centrifugal pump by Achutha Naikan V. N., Behera D. P. International Journal of Scientific & Engineering Research 9 51-54 (2018)
Orbital TIG Welding and Evaluating Methods of Propulsion Feed Lines for Satellites by Karthikeyan M., Achutha Naikan V. N., Narayan R. International Journal of COMADEM 20 - (2017)
Root cause analysis and reliability improvement methods for orbital TIG welding process for propulsion feed system of satellites by Karthikeyan M., Achutha Naikan V. N., Narayanan R. International Journal of System Assurance Engineering and Management 8 1-15 (2017)
Broken Rotor Bar Fault Diagnosis in VFD Driven Induction Motors by an Improved Vibration Monitoring Technique by Kumar T. A., Singh G. , Achutha Naikan V. N. International Journal of Performability Engineering 13 87-94 (2017)
Infrared thermography based diagnosis of inter-turn fault and cooling system failure in three phase induction motor by Singh G., Achutha Naikan V. N. Infrared Physics & Technology 87 134-138 (2017)
Induction motor inter turn fault detection using infrared thermographic analysis by Achutha Naikan V. N., Singh G. , Anil Kumar T. C. Infrared Physics & Technology, Infrared Physics & Technology 77 277-282 (2016)
Vibration Response Based Reliability Modeling for Rotor Systems with Imbalance by Achutha Naikan V. N., V. H. International Journal of Performability Engineering 12 283-296 (2016)
A Markov system dynamics approach for repairable systems reliability modeling by Rao M., Achutha Naikan V. N. International Journal of Reliability, Quality and Safety Engineering, World Scientific Publishing Company Vol. 23 , No.1 pp1650004-1to15 (2016)
A Methodology for Risk Assessment and Formulation of Mitigation Strategies for Trucking Industry by Achutha Naikan V. N., Dadsena K. K., Sarmah S. P. International Journal of Performability Engineering 12 573-588 (2016)
Orbital TIG Welding Process Parameter Optimization using Design of Experiment for Satellite Application by Achutha Naikan V. N., M. K. International Journal of Performability Engineering 12 155-172 (2016)
Orbital TIG Welding Process Parameter Optimization using Design of Experiment for Satellite Application by Karthikeyan M., Achutha Naikan V. N., Narayan R. , Sudhakar D. International Journal of Performability Engineering Vol.12, No.2 - (2016)
Orbital TIG Welding Process Parameter s Effect on Porosity in Design of Experiment for Satellite Application by Achutha Naikan V. N., M. K. Life Cycle Reliability and Safety Engineering 5 1-7 (2016)
A System Dynamics Model for Transient Availability Modelling of Repairable Redundant Systems by Rao M., Achutha Naikan V. N., Mahanty B. International Journal of Performability Engineering Vol.11, No.3 pp203-211 (2015)
Availability Modeling of Repairable systems using Markov system dynamics simulation by Rao M., Achutha Naikan V. N. International Journal of Quality and Reliability Management, Emerald Group Publishing Limited Vol.32, No.5 pp517-531 (2015)
Accelerated Temperature and Voltage Life Tests on Aluminium Electrolytic Capacitors: A DOE Approach by Achutha Naikan V. N., Rathore A. International Journal of Quality and Reliability Management, Emerald Publishers Vol 33, No. 1 pp120-139 (2015)
Effectiveness of vibration monitoring in the health assessment of induction motor by Anil Kumar T., Singh G. , Achutha Naikan V. N. (Special Issue Uncertainty in PHM), International Journal of Prognostics and Health Management Vol.6 1-9 (2015)
Multiple Fault Classification Using Support Vector Machine in a Machinery Fault Simulator by Sahab F., Mohanty A. R., Achutha Naikan V. N. Vibration Engineering and Technology of Machinery, Springer International Publishing Volume 23 pp1021-1031 (2015)
A misalignment detection methodology by measuring rate of temperature rise of shaft coupling using thermal imaging by Sahab F., Mohanty A. R., Achutha Naikan V. N. Journal of Risk and Reliability, SAGE Journals Vol.229, No.3 pp. 209-219 (2015)
Reliability Estimation by Accelerated Life Testing by Achutha Naikan V. N. Life Cycle Reliability and Safety Engineering Vol.4 pp 32-42 (2015)
A Demand-Supply Interference Technique for Modeling Spare-parts Inventory Policy by Datar A., Sarmah S. P., Achutha Naikan V. N. International Journal of Management Science and Engineering Management, Taylor & Francis Vol. 10, No. 3 pp 191-198 (2014)
Transducer invariant multi-class fault classification in a rotor-bearing system using support vector machines by Sahab F., Mohanty A. R., Guduri B. , Achutha Naikan V. N. International Journal of Measurement Vol.58 pp363-374 (2014)
Condition monitoring of combined fault scenarios in rotating machinery by integrating vibration based analysis and design of experiments by Majumdar J., Achutha Naikan V. N. COMADEM International journal of condition monitoring and diagnostic engineering management Vol.17, No.2 pp 29-37 (2014)
Reliability analysis of general standby systems using a novel hybrid simulation approach by Rao M., Achutha Naikan V. N. International Journal of Advanced Science and Engineering Technology, Springer Berlin Heidelberg Vol.4, No.1 - (2014)
Reliability Analysis of Repairable systems using System Dynamics Modeling and simulation by Rao M., Achutha Naikan V. N. Journal of Industrial Engineering International, Springer Vol 10, No.3 pp 1-10 (2014)
Multiple fault classification using support vector machine in a machinery fault simulator by S., Mohanty A. R., Achutha Naikan V. N. 10th International Conference on Vibration Engineering and Technology of Machinery, Manchester, UK pp. 1021-1026 (2014)
Techniques for optimal placement of transducers for fault detection in rotating machines by Sahab F., Mohanty A. R., Dastidar S. G., Achutha Naikan V. N. Proceedings of the Institution of Mechanical Engineers, part O, Journal of Risk and Reliability Vol. 227, No. 2 pp119-131 (2013)
Book Review on Life Cycle Reliability Engineering by Achutha Naikan V. N. Microelectronics Reliability Vol. 53, No. 12 2079-2079 (2013)
Reliability Analysis of Temperature Sensor System by Panchangam S. P., Achutha Naikan V. N. International Journal of Reliability Quality and Safety Engineering Vol 20, No. 1 pp 1350003-1 to 20 (2013)
Reliability Modeling of Rotary Systems Subjected to Imbalance by Hussain V., Achutha Naikan V. N. International Journal of Performability Engineering Vol. 9, No. 4 pp 423-432 (2013)
Reliability Modeling of Sensors Network System for Critical Applications by Swajeet Pilot Panchangam and V.N.A. Naikan International Journal of Conceptions on Electronics and Communication Engineering Vol. 1,No. 1 pp 1-5 (2013)
Reliability and Imbalance Modelling of a Low Pressure Turbine Rotor by Hussain V., Achutha Naikan V. N. Life Cycle Reliability and Safety Engineering Vol.1, No. 2 pp 61-70 (2012)
Research Trends in Quality Engineering and Management by Majumdar J., Vijaykumar B. , Achutha Naikan V. N. International Journal of Performability Engineering , Special Issue on New Trends on Quality Engineering & Management Vol. 8, No. 6 pp 587-600 (2012)
Application of Reliability Growth Models to Sensor System by Panchangam S. P., Achutha Naikan V. N. Reliability Theory & Applications Vol. 7, No. 4 pp 19-30 (2012)
Failure Analysis Methods for Reliability Improvement of Electronic Sensors by Swajeet Pilot Panchangam and V.N.A. Naikan International Journal of Recent Technology and Engineering Vol.1, No. 3 pp 83-87 (2012)
Guest Editorial on New Trends in Quality Engineering and Management by Achutha Naikan V. N. International Journal of Performability Engineering, Special Issue on New Trends on Quality Engineering & Management Vol. 8, No. 6 pp 585-586 (2012)
Optimal Sensor Networks System reliability Allocation using Improved AGREE Method by Swajeet Pilot Panchangam and V.N.A. Naikan Reliability Theory & Applications Vol. 7, No 4 pp 80-89 (2012)
System Dynamics Approach for Modeling Cost of Quality by B. Mahanty, T. Nath and V.N.A. Naikan International Journal of Performability Engineering, Special Issue on New Trends on Quality Engineering & Management Vol. 8, No. 6 pp 625-634 (2012)
General Repair Models for Maintained Systems by A. Syamsundar, K. Muralidharan, and V.N.A. Naikan Sri Lankan Journal of Applied Statistics vol. 12 pp117-143 (2011)
Imperfect Repair Proportional Intensity Models for Maintained Systems by Syamsundar A., Achutha Naikan V. N. IEEE Transactions on Reliability Vol 60, No.4 pp 782-787 (2011)
A Managerial tool for Reliability analysis using a novel Markov System Dynamics (MSD) approach by Rao M., Achutha Naikan V. N. International Journal of Management Science and Engineering Management Vol.4, No.3 pp 230-240 (2009)
A Markov System Dynamics (MSD) based Reliability and Availability analysis of a process industry by Rao M., Achutha Naikan V. N. International Journal of Communications in Dependability and Quality Vol 12, No.3 pp 26-49 (2009)
An Algorithm for Simultaneous Optimization of Parameters of condition based preventive maintenance by P.N.S. Rao and V.N.A. Naikan Structural Health Monitoring Vol. 8, No.1 pp 83-94 (2009)
A Novel Markov System Dynamic Framework for Reliability Analysis of Systems by Rao M., Achutha Naikan V. N. International Journal of Economic Quality Control Vol. 24, No 1 pp1-116 (2009)
Sequential Detection of Change Points for Maintained Systems Using Segmented Models by Syamsundar A., Achutha Naikan V. N. Quality and Reliability Engineering International Vol. 25, No. 6 pp 739-757 (2009)
An Optimal Maintenance Policy for Compressor of a Gas Turbine Power Plant by Rao P. N., Achutha Naikan V. N. ASME Journal for Engineering for Gas Turbines and Power Vol. 130, No.2 pp 0218011-0218015 (2008)
A proportional intensity segmented model for maintained systems by Syamsundar A., Achutha Naikan V. N. Proceedings of the Institute of Mechanical Engineers Part O - Journal of Risk and Reliability Vol. 222, No. 4 pp 643-654 (2008)
Mathematical Modeling of Maintained Systems using Point Processes by Syamsundar A., Achutha Naikan V. N. The IMA Journal of Management Mathematics pp 1-27 (2008)
Modelling of maintained systems using segmented point processes by A. Syamsundar and V.N.A. Naikan Advances in Performance and Safety of Complex Systems Macmillan Advanced Research Series pp 412-419 (2008)
A Markov System Dynamics (MSD) Approach for Reliability Analysis by M.S. Rao and V.N.A. Naikan International Journal of Communications in Dependability and Quality Vol 11, No.3 pp17-30 (2008)
Hierarchical Segmented Point Process Models with multiple change points for Maintained Systems by Syamsundar A., Achutha Naikan V. N. International Journal of Reliability Quality and Safety Engineering Vol 15, No 3 pp 261-304 (2008)
Analysis of crane wheel assembly failures using multivariate counting and point processes by Syamsundar A., Achutha Naikan V. N. Journal of Structural Engineering Vol.34,, No.4 pp 316-322 (2007)
Dynamic collaboration of repair crews in production shops by P.N.S. Rao and V.N.A. Naikan Journal of Scientific and Industrial Research Vol 66, No.4 pp317-324 (2007)
Segmented point process models for maintained systems by Syamsundar A., Achutha Naikan V. N. International Journal of Reliability, Quality and Safety Engineering Vol.14, No.5 431-458 (2007)
Generalized condition-based preventive maintenance policy for Markov deteriorating systems by Rao P. S., Achutha Naikan V. N. International Journal on Performability Engineering Vol 2, No.2 pp175-189 (2006)
An Optimization methodology for condition based minimal and major preventive maintenance by Rao P. N., Achutha Naikan V. N. International Journal of Economic Quality Control Vol 21, No.2 pp127-141 (2006)
Reliability Modeling and Analysis of Automobile Engine Oil by Kapur S., Achutha Naikan V. N. Journal of IMechE Automobile Engineering Vol 220, No.2 pp 187-194 (2006)
Dynamic Modeling for Process Improvement by T. Nath, B. Mahanty and V.N.A. Naikan IT Based Manufacturing Narosa Publishers, New Delhi pp 691-696 (2003)
Dynamics of Quality Improvement through Prevention Efforts by Nath T. K., Achutha Naikan V. N. R&D Quality Quest Vol.5, No.2 pp 5-16 (2003)
Ergonomic Design of Indian Cycle Rickshaw by A., Achutha Naikan V. N. Industrial Engineering Journal Vol.32, No.2 pp3-7 (2003)
Implementation of Cost of Quality Among Indian Industries: A Survey by Nath T. K., Mahanty B. , Achutha Naikan V. N. International Journal of Manufacturing Technology and Management Vol. 5, No. 5/6 pp 579-592 (2003)
Optimum Design of Component Tolerances of Assemblies Using Constraint Networks by Yang C. C., Achutha Naikan V. N. International Journal of Production Economics Vol. 84, No.2 pp149-163 (2003)
Optimum Tolerance Design for Complex Assemblies using Hierarchical Interval Constraint Networks by Yang C. C., Achutha Naikan V. N. International Journal of Computers and Industrial Engineering Vol. 45 pp 511-543 (2003)
Optimum Tolerance Design using Constraint Networks and Relative Sensitivity Algorithm by Yang C. C., Achutha Naikan V. N. International Journal of Applied Artificial Intelligence Vol.17, No.7 pp 631-669 (2003)
Maintainability and Reliability Analysis of a Fleet of Shovels by Roy S. K., Achutha Naikan V. N., Bhattacharya M. M. Mining Technology, International Journal of Institutions of Materials, Minerals and Mining, UK Vol. 110, No. 3 pp A163-A171 (2001)
Machinery Selection Process Capability and Product Reliability Dependence by Murty A. S., Achutha Naikan V. N. International Journal of Quality and Reliability Management Vol.14, No.4 pp381-390 (1997)
Condition Monitoring Strategy A Risk Based Interval Selection by Murty A. S., Achutha Naikan V. N. International Journal of Production Research Vol.34, No.1 pp 285-296 (1996)
Reliability Strength Design Through Inverse Distributions Exponential and Weibull Cases by Murty A. S., Achutha Naikan V. N. International Journal of Reliability Engineering & System Safety Vol 51, No.1 pp 77-82 (1996)
Availability and Maintenance Cost Optimization of a Production Plant by Murty A. S., Achutha Naikan V. N. International Journal of Quality and Reliability Management Vol.12, No.2 pp28-35 (1995)
Inverse Distributions in Reliability Design A Revisit by Murty A. S., Achutha Naikan V. N. International Journal of Reliability Engineering & System Safety Vol. No.44 pp167-171 (1994)

Book Chapter/Section

A Hybrid AI-based Conceptual Decision-Making Model for Sustainable Maintenance Strategy Selection by Boral S., Chaturvedi S. K., Naikan V. , Howard I. Advanced Multi-Criteria Decision Making for Addressing Complex Sustainability Issues 63-93 (2019)

Fault diagnosis of Induction motor cooling system using infrared thermography by Singh, Gurmeet, Kumar,T. CH. Anil, & Naikan Power Systems (ICPS), International Conference on (Accepted and Presented). IEEE - (2016)
Effectiveness of Vibration and Current Monitoring in detecting Broken Rotor Bar and Bearing Faults in an Induction Motor by Kumar,T. CH. Anil, Singh, Gurmeet, & Naikan, V. N. A. Power Systems (ICPS), International Conference on (Accepted and Presented). IEEE - (2016)
Effectiveness of Current Envelope analysis to detect broken rotor bar and inter turn faults in an inverter fed induction motor drive by Singh, G., Kumar, C. A., & Naikan, V. N. A. International Conference on Power and Advanced Control Engineering (ICPACE) IEEE pp. 191-194 (2015)
Multiple fault scenario analysis in rotating machinery assets by applying design of experiments on vibration data by Joydeep Majumdar, V. N .A. Naikan, P.K. Ray 27th International Congress of Condition Monitoring and Diagnostic Engineering Management, Australia, Queensland, Brisbane, September- 16 - 18 - (2014)
Accelerated Life Testing of Aluminum Electrolytic Capacitors: Effect of Applied Voltage on Life by A. Rathore and V.N.A. Naikan SRESA National Conference on Reliability and Safety Engineering, Thiruchirapally pp. 79-82 (2014)
Shaft misalignment detection by thermography by S. Fatima, A. R. Mohanty and V.N.A. Naikan Proceedings of the 21th International Congress on, Beijing, China, July 13-17 - (2014)
Virtual Fault Simulation for Bearing Defects of Various Types of Rotating Machine by D. P. Behera, Reshmi Behera and V.N.A. Naikan 5th International Conference- Confluence The Next Generation Information Technology Summit (Confluence), IEEE explore , pp. 726-730 (2014)
Virtual Fault Simulation for Diagnosis of Shaft Misalignment of Rotating Machine by D. P. Behera, Reshmi Behera and V.N.A. Naikan International Conference on Advances in Computing, Communications and informatics (ICACCI, 24-27 Sept. 2014) pp. 2476-2480 (2014)
Virtual Fault Simulation for Sympathetic Vibrations of Rotating Machine by D. P. Behera and V.N.A. Naikan IEEE International Advance Computing Conference (IACC) pp. 905-910 (2014)
Environmental Study on Battery Performance at Low Temperature, SRESA by B. Mago and V.N.A. Naikan National Conference on Reliability and Safety Engineering, Thiruchirapally pp. 37-43 (2014)
Effective time domain features for distinguishing coupling effects on misaligned shaft by V.N.A. Naikan Proceedings of Acoustics, New Delhi, November 10-15 - (2013)
Methodology adopted to improve reliability in satellite integration by optimizing parameters of orbital TIG welding by M. Karthikeyan, R. Narayan, and G. Narayanan and V.N.A. Naikan National Propulsion Conference, IIT Madras, Feb 21-23 - (2013)
Most Effective Transducer Locations for Permanent Health Monitoring of A Rotating Machine by S. Fatima, A. R. Mohanty and V.N.A. Naikan 20th International Congress on Sound and Vibration to be held at Bangkok, Thailand, July 7-11 - (2013)
Reliability Analysis of Hall Effect Current Sensor System by S. P. Panchangam and V.N.A. Naikan International Conference on Optimization Modeling and Applications (OPTIMA-2012), New Delhi - (2012)
Reliability modeling of sensors network system for critical applications by S. P. Panchangam and V.N.A. Naikan Intl. conf. on Engineering, Technology and Management, the 2nd International Conference on Advances in Electronics Engineering, Tirupati, Sept. 7-8 - (2012)
Failure mode identification and analysis of electronic sensors by S. P. Panchangam and V.N.A. Naikan International Conference on Advances in Electronics and Bio-Medical Engineering, Pondicherry, India - (2012)
Reliability Improvement Through Failure Mode Effects And Criticality Analysis On Electric Propulsion Feed System by M. Karthikeyan, M.M. Nayak, R. Narayan, K.M. Shanbhouge and V.N.A. Naikan National conference on Electric Propulsion system, ISRO Bangalore, February 23-24 - (2011)
A hybrid Markov system dynamics approach for availability analysis of degraded systems by M.S. Rao and V.N.A. Naikan Proceedings of Intl. Conf. on Industrial Engineering & Operations Management, Kuala Lumpur, Malaysia pp. 1160-1165 (2011)
General Repair Models for Maintained Systems by Syamsundar A., K. Muralidharan and V.N.A. Naikan International Statistics Conference, Colombo, December 28-30 - (2011)
Imperfect repair accelerated failure time models with time varying covariates for maintained systems by Syamsundar A., D. E. V. Kumar, and V.N.A. Naikan Acc 7th International Conference on Modelling in Industrial Maintenance and Reliability, MIMAR 2011, Sidney Sussex College, University of Cambridge UK, April 18-20 - (2011)
Reliability and life prediction for electronic connectors for control applications by P.V. Varde, M. Agarwal, P.P. Marathe, U. Mohapatra, and R.C. Sharma and V.N.A. Naikan Second International Conference on Reliability, Safety & Hazard, Mumbai - (2010)
A system thinking approach for time dependent availability analysis of multi-component systems by M.S. Rao and V.N.A. Naikan Second International Conference on Reliability, Safety & Hazard, Mumbai pp. 162-167 (2010)
Imperfect repair accelerated failure time processes for maintained systems by Syamsundar A., E. Vijay Kumar and V.N.A. Naikan Second International Conference on Reliability, Safety & Hazard, Mumbai - (2010)
Point Process Based Maintenance Modeling for Repairable Systems: A Review by V.M.S. Hussain and V.N.A. Naikan Proceedings of the 2010 International Conference on Industrial Engineering and Operations Management, Dhaka, Bangladesh pp. 418-426 (2010)
System Dynamics simulation based hybrid approach for reliability analysis by M.S. Rao and V.N.A. Naikan Proceedings of the27th International Conference of the System Dynamics Society, Albuquerque, New Mexico, USA, July 26 - 30 - (2009)
A soft computing approach for reliability analysis of repairable systems by M.S. Rao and V.N.A. Naikan ICAME S. V. National Institute of Technology, Surat, Dec.15-17 - (2008)
A system dynamics based soft computing approach for Reliability analysis of systems by M.S. Rao and V.N.A. Naikan International Conference on Operations Research for a growing Nation, ORSI, Tirupati, December 14-17 - (2008)
Hierarchical Segmented Point Process Models with multiple change points for Maintained Systems by Syamsundar A. and V.N.A. Naikan International Conference on Present Practices and Future Trends in Quality and Reliability (ICONQR 08), January 21-25 - (2008)
Modelling of maintained systems using segmented point processes Part 2 by Syamsundar A. and V.N.A. Naikan International Conference on Reliability Safety and Quality Engineering (ICRSQE) - (2008)
Propagation analysis of data-errors using data flow diagrams by Neelesh Bhattacharya and V.N.A. Naikan Flow Graph, National Conference on Mathematical and Modeling Optimization and their Application, OptiMA, Feb 28-29 - (2007)
A Hybrid Segmented Model for Maintained System by Syamsundar A. and V.N.A. Naikan Proceedings of the INCRESE, Udaipur PP 572-590 (2007)
A Reliability Analysis Methodology at Design Stage of Systems by M.S. Rao and V.N.A. Naikan Proceedings of the INCRESE, Udaipur PP 663-671 (2007)
A study of the Key Factors influencing Software Quality by Neelesh Bhattacharya and V.N.A. Naikan International Conference on Modeling and Simulation, August (2007) - (2007)
An Algorithm for Simultaneous Optimization of Load Sharing Repairable K-out-of-N System by P.N.S. Rao and V.N.A. Naikan CONQUEST-2006, Hyderabad Vol II pp. 274 - 284 (2006)
Application of basic reliability models for a process industry by M.S. Rao and V.N.A. Naikan Proceedings of 2nd International conference INCRESE, Chennai, December 18-20 - (2006)
Application of reliability models for a process industry by M. Srinivasa Rao and V.N.A. Naikan International conference on Reliability and Safety Engineering, Chennai, , pp 426-433 (2006)
Crain wise analysis of wheel assembly failures using point process by A. Syamsundar and V.N.A. Naikan International conference on Reliability and Safety Engineering, Chennai, December 18-21 pp 80-91 (2006)
Crane wise analysis of wheel assembly failures using Point Processes by A. Syamsundar and V.N.A. Naikan Proceedings of 2nd International Conference in Reliability and Safety Engineering, Chennai, pp 80-91 (2006)
Modern software testing methods for the analysis of high-risk applications by Neelesh Bhattacharya and V.N.A. Naikan International conference on Reliability and Safety Engineering, Chennai pp 357-367 (2006)
An Algorithm for Simultaneous Optimization of K-out-of-N Repairable System by P.N.S. Rao and V.N.A. Naikan International Conference on Reliability, Statistics and related fields (ICRSRF), January 7 - 9, - (2005)
Generalized Preventive Maintenance Policies for Markov Deteriorating Systems by P.N.S. Rao and V.N.A. Naikan INCRESE 2005, Bhubaneswar, Dec. 21-23 - (2005)
Maintenance Cost Benefit Analysis of Production Shops - An Availability Based Approach by P.N.S. Rao and V.N.A. Naikan In Proceedings-Annual Reliability and Maintainability Symposium, Alexandria, United States, IEEE RAMS pp. 404 - 409 (2005)
Statistical quality control based expert system for a process industry by M.S. Rao and V.N.A. Naikan Proceedings of 2nd International conference INCRESE, Bhubaneswar, December 19-21 - (2005)
Cost Optimal Allocation and Rationing in Supply Chains by C.C. Yang and V.N.A. Naikan 33rd International Conference on Computers and Industrial Engineering, Jeju, Korea, March 25-27 - (2004)
Reliability Modelling of Lubrication Oil by S. Kapur and V.N.A. Naikan All-India conference on Condition Based Maintenance, Calcutta, December 3-4 - (2004)
Repairable system reliability prediction using neural networks by P.V. Sasatte, R.B. Misra and V.N.A. Naikan 33rd International Conference on Computers and Industrial Engineering, Jeju, Korea, March 25-27 - (2004)
Repairable system reliability prediction using neural networks by P.V. Sasatte, R.B. Misra and V.N.A. Naikan 34th International Conference on Computers and Industrial Engineering, Jeju, Korea, March 25-27 - (2004)
Availability evaluation and maximization of production shops with large number of machines by V.N.A. Naikan All India Conference on Maintenance and Reliability, November 27-28 - (2003)
Implementing reliability - centered maintenance in Indian industries by S.S. Jaglan and V.N.A. Naikan All India Conference on Maintenance and Reliability, November 27-28 - (2003)
Application of Hierarchical Interval Constraint Networks for Optimization of Tolerance Allocation by C.C Yang and V.N.A. Naikan The fourth Asia-Pacific Conference on Industrial Engineering and Management Systems, December 18-20, Taipei - (2002)
Pilot Project on Cost of Quality by T. Nath, B. Mahanty and V.N.A. Naikan International Conference on Integrating World Markets: Living Excellence Through Technology and Beyond, School of Management Studies, MNREC, Allahabad pp1.30-1.37 (2002)
Application of TPM Activities in Indian Jute Industry for Productivity Improvement by S. Kriskna, S. Sahu and V.N.A. Naikan 12th world productivity congress,hong kong, beijing,5-10 November - (2001)
System Dynamics Modeling for Quality Management Systems by T. Nath, B. Mahanty and V.N.A. Naikan 19th All India Manufacturing Technology Design & Research Conference, Indian Institute of Technology, Madras, December 14-16 - (2000)
High Temperature Accelerated Life Tests on Electrolytic Capacitors by V.N.A.Naikan International Conference on Reliability, Maintainability, and Safety,Beijing, China,May 18-21 - (1999)
Reliability, Availability, and Maintainability Studies of a Fleet of 10 m3 Electric Rope Shovel by S.K Roy and V.N.A. Naikan International Conference on Management of Mining machinery,Calcutta pp157-177 (1999)
Reliability Evaluation of Electrolytic Capacitors by Life Testing at High Temperature by V.N.A. Naikan 23rd National systems Conference, Banarus Hindu University, Varanasi, pp 81-85 (1999)
Maintainability Concepts in high Reliability Electronic Equipment by P. Kulkarni, P. Dhar and V.N.A. Naikan INS Valsura, Jamnagar pp. 26-36 (1996)
A Temperature Monitoring Strategy for Quick Fault Location in a production Machine by A.S.R. Murty and V.N.A. Naikan National Conference on Condition Monitoring, National Productivity Council, Madras, VE1-5, - (1991)
Trends in Steam Turbine Monitoring, National Conference on Condition Monitoring by A.S.R. Murty and V.N.A. Naikan National Productivity Council, Madras, IID1-5 - (1991)
Condition Monitoring Techniques by A.S.R. Murty, Satish Kumar and V.N.A. Naikan National Conference on Condition Monitoring, Engineers India Limited, Nagpur - (1989)

Subir Chowdhury School of Quality and Reliability

Faculty

V N Achutha Naikan

Research Areas

Principal Investigator

Co-Principal Investigator

Ph. D. Students

Amandeep Nagpal

Subir Kumar Patra