Enhancing energy efficiency and ergonomics in spinning charkha, handloom, potters, and other rural artisans Wind and wave energy harvesting Thermoelectric cooling and electric power generation Solid waste management Micro-irrigation tools and farm machinery Oxygen concentrator, O2 generator, O2 dispenser
Centre of Excellence for Unified AI-Enabled Craft Ecosystem Platform OFFICE OF THE DEVELOPMENT COMMISSIONER (HANDICRAFTS), MINISTRY OF TEXTILES,
Enhancement of Productivity and Optimization of Energy Requirement of Spinning Charkha Khadi and Village Industries Commission
UCO Bank PSB IIT Kharagpur Hackathon Deputy General Mnager(IT)
Co-Principal Investigator
Model Jute Village Initiative- Sargachi National Jute Board,
Network Project on Engineering Intervention in Micro-Irrigation System - MIS for Improving Water Productivity Central Institute of Agricultural Engineering (Indian Council of Agricultural Research)
Area of Research: Design of Flow-Regulated Drip Emitter and Automatic Micro Irrigation System
Awards and Accolades
Award by TIFAC for innovation
Award by DSIR for innovation
Gold plaque for innovation
Gold medal for innovation
Research Preview
All Publications
Conferences
Optimizing Heat Sink Size for a Given Heat Source by Kumar A., Mondal M. K. International Conference on Futuristic Technologies (INCOFT) 1-5 (2024)
Comprehensive Recycling of the Coalmine Overburden Waste: A Sustainable Waste to Wealth Proposition by Mondal M. K., Bose B. P. 11th International Conference on Sustainable Solid Waste Management - (2023)
Optimizing Heat Sink Size for a Given Heat Source by Kumar A., Mondal M.K. 2023 2nd International Conference on Futuristic Technologies, INCOFT 2023 - (2023)
Two- Components Flow Regulating Drip Emitter Design, Simulation and Optimization by Tiwari K. N., Mondal M. K. International E-Conference on Water Source Sustainability - (2021)
Failure Detection and Accident Prevention in Railways by Applying AI-Based Vibration Analysis by Mondal M. K., Kapoor K. , Karri N. , Mandol S. , Kmar A. , Chouksey S. International Conference on Condition Monitoring (ICCM) 2021 - (2021)
An Automated Wireless Irrigation System: With and Without Internet Connectivity by Mondal M. K., Tiwari K. N. International E-Conference on Water Source Sustainability - (2021)
Improvement of thermal performance of pin fin heat sink using different types of perforations: A study under natural convection by Kumar A., Mondal M.K. Proceedings of the ASME Design Engineering Technical Conference 1 - (2019)
Improvement of Thermal Performance of Pin Fin Heat Sink Using Different Types of Perforations: A Study Under Natural Convection by Kumar A., Mondal M. K. International Design Engineering Technical Conferences & Computers and Information in Engineering Conference - (2019)
Transmission Power Management in Power-Split Hybrid Electric Vehicle Using Response Surface Method and Data Driven Design Synthesis by Mandol S., Dan P. K., Mondal M. K. 11th International Conference on Applied Energy - (2019)
Modeling for Optimality in Design of Planetary Ring Gear to Reduce Stress Development by Mandol S., Dan P. K., Mondal M. K. IEEE 3rd International Conference for Convergence in Technology (Flagship Conference of Asia Pecific) - (2018)
Modeling for Optimality in Design of Planetary Ring Gear to Reduce Stress Development a Response Surface Methodology Based Parametric Modelling Approach by Mandol S., Dan P.K., Mondal M.K. 2018 3rd International Conference for Convergence in Technology, I2CT 2018 - (2018)
Engineering simulation for product design and development in cyber-physical context: A case-based study by Mandol S., Dan P.K., Mondal M.K. Proceedings of International Conference on Computers and Industrial Engineering, CIE 2018-December - (2018)
ENGINEERING SIMULATION FOR PRODUCT DESIGN AND DEVELOPMENT IN CYBER-PHYSICAL CONTEXT: A CASE-BASED STUDY by Mandol S., Dan P. K., Mondal M. K. The 48th INTERNATIONAL CONFERENCE ON COMPUTERS & INDUSTRIAL ENGINEERING - (2018)
Deriving optimal transmission architecture of planetary gear assembly by mathematical modelling of design parameters by Mandol S., Dan P.K., Mondal M.K. IOP Conference Series: Materials Science and Engineering 393 - (2018)
Deriving Optimal Transmission Architecture of Planetary Gear Assembly by Mathematical Modelling of Design Parameters by Mandol S., Dan P. K., Mondal M. K. 10th International Symposium on Machine and Industrial Design in Mechanical Engg. (KOD 2018) - (2018)
Thermal Performance of Perforated Pin Finned Heat Sinks: A Simulation Based Study by Kumar A., Dasari U. , Mondal M. K. COMSOL Conference 2018 - (2018)
5th International Conference on Sustainable Solid Waste Management by Mondal M. K., Bose B. P., Bansal P. 5th International Conference on Sustainable Solid Waste Management - (2017)
Recycling Coalmine Wastes in Construction Materials to Advance End-of-Life by Bose B. P., Mondal M. K., Raj P. 16th International Waste Management and Landfill Symposium - (2017)
IEEE 3rd International Conference on MOOCs, Innovation and Technology in Education by Mondal M. K., Kumar A. , Bose B. P. IEEE 3rd International Conference on MOOCs, Innovation and Technology in Education 407-411 (2015)
Symposium
Offering Entrepreneurial Acceleration to Aspiring Students as an Optional Credit-based Subject for the Progression of Their Innovation-driven Business Ideas Without Sacrificing Academics or Dropping Out by Mondal M. K. 12th Annual Deshpande Symposium for Innovation & Entrepreneurship in Higher Education - (2023)
Book Chapter/Section
Two-Components Flow Regulating Drip Emitter Design, Simulation and Optimization by M R., Ahir P. B., Mondal M. K., Tiwari K. N. Sustainability of Water Resources, Impacts and Management 283-292 (2022)
An Automated Wireless Irrigation System: With and Without Internet Connectivity by M R., D M. , Mondal M. K., Tiwari K. N. Sustainability of Water Resources, Impacts and Management 393-303 (2022)
Production of Construction Bricks Using Iron Ore Tailings and Clay by Mondal M. K., Bose B. P., Behera K. Waste Management and Resource Efficiency 583-896 (2018)
Educational Package
Entrepreneurship Essentials by Mondal M. K. - (2021)
Journal
Recycling waste thermoplastic for energy efficient construction materials: An experimental investigation by Mondal M. K., Bose B. P., Bansa P. Journal of Environmental Management 240 119-125 (2019)
Recycling waste thermoplastic for energy efficient construction materials: An experimental investigation by Mondal M.K., Bose B.P., Bansal P. Journal of Environmental Management 240 119-125 (2019)
Book
Valuation of Equity and Intangible Assets An Empirical Study by Mondal M. K., Mohapatra P. 1-236 (2016)
Use of Minestone from Coal Mine Overburden as Aggregate in Concrete by Bose B. P., K. Behera and M. K. Mondal 6th International Conference on Solid Waste Management, Jadavpur University, Kolkata - (2016)
Production of Construction Bricks Using Iron Ore Tailings and Clay by Behera K., B. P. Bose and M. K. Mondal 6th International Conference on Solid Waste Management, Jadavpur University, Kolkata - (2016)
Entrepreneurship education through MOOCs for accelerated economic growth by Manoj Kumar Mondal, Aashish Kumar, Bishnu Pada Bose, IEEE 3rd International Conference on MOOCs, Innovation and Technology in Education (MITE) - (2015)
Completed Projects
Principal Investigator
Development of a Mechanized, Easy to Operate Jute Harvesting Tool-Phase-I
Hazmat Suit with Forced Purified and Cooled Air Circulation for Medical Professionals and Other Bio-Hazard Environment
Development of Low-cost Portable Personalized Air-conditioning System
Security Policy Enforcement on an Application During Runtime
Co-Principal Investigator
BabyWhispr - AI powered acoustic analysis of infant cries for caretakers
