• Young Faculty Award 2012

Journal
• On the possibility of using Ramie A natural material in cost-effective low threat body armours by Sen S., Shaw A., Adhikari B. Journal of Industrial Textiles - (2022)
• A mathematical model for perforation of metal plates through adiabatic shear plugging by Sen S., Shaw A., Nayak S. International Journal of Impact Engineering 163 - (2022)
• Response of R.C. plates under blast loading using FEM-SPH coupled method by Karmakar S., Shaw A. Engineering Failure Analysis 125 - (2021)
• Numerical modelling of crack initiation, propagation and branching under dynamic loading by Islam M.R.I., Shaw A. Engineering Fracture Mechanics 224 - (2020)
• Taylor impact test revisited: Determination of plasticity parameters for metals at high strain rate by Sen S., Banerjee B., Shaw A. International Journal of Solids and Structures 193-194 357-374 (2020)
• Pseudo-spring SPH simulations on the perforation of metal targets with different damage models by Islam M. I., Shaw A. Engineering Analysis with Boundary Elements 111 55-77 (2020)
• Pseudo-spring SPH simulations on the perforation of metal targets with different damage models by Islam M.R.I., Shaw A. Engineering Analysis with Boundary Elements 111 55-77 (2020)
• A stable SPH with adaptive B-spline kernel by Lahiri S. K., Bhattacharya K. , Shaw A. , Ramachandra L. S. Journal of Computational Physics 422 109761- (2020)
• A stable SPH with adaptive B-spline kernel by Lahiri S.K., Bhattacharya K., Shaw A., Ramachandra L.S. Journal of Computational Physics 422 - (2020)
• Numerical investigation of ballistic performance of shear thickening fluid (STF)-Kevlar composite by Sen S., Jamal M. B., Shaw A. , Deb A. International Journal of Mechanical Sciences 164 105174- (2019)
• On performance of different material models in predicting response of ceramics under high velocity impact by Lahiri S.K., Shaw A., Ramachandra L.S. International Journal of Solids and Structures 176-177 96-107 (2019)
• Pseudo-Spring Smoothed Particle Hydrodynamics (SPH) Based Computational Model for Slope Failure by Ray R., Deb K. , Shaw A. Engineering Analysis with Boundary Elements 101 139-148 (2019)
• On consistency and energy conservation in smoothed particle hydrodynamics by Islam M.R.I., Chakraborty S., Shaw A. International Journal for Numerical Methods in Engineering 116 601-632 (2018)
• A generalized model for dynamic deformation and failure of clamped beam under impact loading by Sen S., Shaw A. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences 474 - (2018)
• A Computational Framework for Modelling Impact Induced Damage in ceramic and ceramic-metal Composite Structures by Chakraborty S., Islam M. I., Shaw A. , Ramachandra L. S., Reid S. R. Composite Structures 164 263-276 (2017)
• A computational model for failure of ductile material under impact by Islam 9. I., Chakraborty S. , Shaw A. , R. International Journal of Impact Engineering 108 334-347 (2017)
• An axisymmetric model for Taylor impact test and estimation of metal plasticity by Chakraborty, S., Shaw, A., Banerjee, B Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences 471 (2174) - (2015)
• Determination of inter-yarn friction and its effect on ballistic response of para-aramid woven fabric under low velocity impact by Das, S., Jagan, S., Shaw, A., Pal, A Composite Structures 120 129-140 (2015)
• Prognosis for ballistic sensitivity of pre-notch in metallic beam through mesh-less computation reflecting material damage by Chakraborty, S., Shaw, A International Journal of Solids and Structures 67-68 294-301 (2015)
• Crack propagation in bi-material system via pseudo-spring Smoothed Particle Hydrodynamics by Chakraborty, S., Shaw, A. International Journal of Computational Methods in Engineering Science and Mechanics 15 294-301 (2014)
• A pseudo-spring based fracture model for SPH simulation of impact dynamics by Chakraborty, S., Shaw, A. International Journal of Impact Engineering 58 84-95 (2013)
• Penetration of rigid objects into semi-infinite compressible solids by Shaw, A. Mechanics of Materials 50 22-35 (2012)
• Optimised form of acceleration correction algorithm within SPH-based simulations of impact mechanics by Shaw, A., Roy, D., Reid, S.R. International Journal of Solids and Structures 48 3484 - 3498 (2011)
• Heuristic acceleration correction algorithm for use in SPH computations in impact mechanics by Shaw, A., Reid, S. R. Computer Methods in Applied Mechanics and Engineering 198 3962 - 3974 (2009)
• Applications of SPH with the Acceleration Correction Algorithm in Structural Impact Computations by Shaw A., R. Currect Science 97 1177-1186 (2009)
• Stabilized SPH-based simulations of impact dynamics using accelerationcorrected artificial viscosity by Shaw, A., Roy, D. International Journal of Impact Engineering 48 98-160 (2009)
• Mesh-free Approximations via the Error Reproducing Kernel Method and Applications to Nonlinear Systems Developing Shocks by Shaw A., K. , R. International Journal of Nonlinear Mechanics 44 417-431 (2009)
• The theory of Cosserat points applied to the analyses of wrinkled and slack membranes by Banerjee B., Shaw A. , R. Computational Mechanics 43 415-429 (2009)
• A NURBS-based Parametric Method Bridging Mesh-free and Finite Element Formulations by Shaw A., R. , Banerjee B. Computer Modeling in Engineering & Sciences 26 31-60 (2008)
• NURBS-based Parametric Mesh-free Methods by Shaw A., R. Computer Methods in Applied Mechanics and Engineering 197 1541-1567 (2008)
• Improved Procedures for Static and Dynamic Analyses of Wrinkled Membranes by Shaw A., R. Journal of Applied Mechanics 74 590-594 (2007)
• A Kriging-based Error Reproducing and interpolating Kernel Method for Improved Mesh-free Approximations by Shaw A., B. , R. International Journal for numerical methods in engineering 73 1434-1467 (2007)
• Analyses of Wrinkled and Slack Membranes through an Error Reproducing Mesh-free Method by Shaw A., R. International Journal of Solids and Structures 44 3939-3972 (2007)
• A novel form of reproducing kernel interpolation method with applications to nonlinear mechanics by Shaw A., R. Computer Modeling in Engineering and Sciences 19 69-98 (2007)
• A NURBS-based error reproducing kernel method with applications in solid mechanic by Shaw A., R. Computational Mechanics 40 127-148 (2007)
• A reproducing kernel collocation method applied to the nonlinear dynamics of pipe whip in a plane by Shaw A., R. , R. , A. International Journal of Impact Engineering 34 1637-1654 (2007)
• A novel form of interpolating and reproducing kernel method and numerical studies on the nonlinear dynamics of pipe whip by Shaw A., R. Journal of Structural Engineering 32 233-238 (2005)
Book Chapter/Section
• Lecture Notes in Civil Engineering by Sen S., Shaw A. Analytical model for failure of clamped beam subjected to projectile impact 12 161-172 (2019)
• Analytical model for failure of clamped beam subjected to projectile impact by Sen S., Shaw A. Lecture Notes in Civil Engineering 161-172 (2019)
• Beyond classical dynamic structural plasticity using mesh-free modelling techniques by Shaw, A., Reid, S.R., Roy, D., Chakraborty, S. International Journal of Impact Engineering 268-278 (2015)

Principal Investigator

• Vetting of structural drawings for A type faculty accommodation (G+7)
• CHARACTERIZATION OF BALLISTIC PERFORMANCE OF CERAMIC METAL COMPOSITE ARMOUR AGAINST ARMOUR PIERCING (AP) PROJECTILE AN EXPERIMENTAL AND A THEORETICAL STUDY
• Design check of technical building M21
• Vetting of structural design of retaining walls, NAT and VIFT wing wall (CF-1,RW-6,RW-5,RW-4,RW-3,RW-2). Cheking of pile safety for piles S11, S13, S14, S15 and S16
• Vetting of Design, Structural Drawings of Overhead Reservoir at Gandhi Bazar, Barrackpore Cantonment
• Technical Vetting of Civil/Structural Design and Drawings for Serampore UGR Project under KMDA
• Technical Vetting of Civil / Structural Design and Drawings for WTP for Balia Sagardighi Project
• Vetting of Structural Design and Drawing of the Proposed STPs at Arupara, Bally and Baranagar
• Structural Audit of APAS Co-op housing Society Ltd. Building at New Town APAS Co-op Housing Society Ltd.
• Vetting of Health Check-up Report submitted against Administration Building for Baranagar STP
• Vetting of the proposed steel tie beams at EL + 312.00m of Raw water intake cum pump house at Suleipet Dam for Kusumi Block
• Concrete Cubes and Rebar Testing at IIT Kharagpur
• Vetting of the structural design of foundation of 33 nos. OHR of capaciities 200 KL to 1500KL.
• Technical Vetting of Hydraulic and Process Design, Flow Diagram, G.A. Drawings as well as Structural Design and Drawings for Execution of 187 MLD Capacity Water Treatment Plant at Ranaghat I and II Blocks
• Technical vetting of 15 MLD WTP at Shalimar Railway Station
• RCC substructure of the PEB workshop shed
• Technical Vetting of Hydraulic and Process design, Flow diagram, G.A. and detailed working drawings as well as structural design and drawings for execution of 234 MLD capacity radial Plate Settler type Water Treatment Plant for the proposed integrated suface water based piped water supply scheme for Arsenic affected blocks of Baduria, Basirhat-I and II, Deganga and Swarupnagar in North 24-Parganas district under PHE Dte.
• Concrete mix design
• Development of Smoothed Particle Hydrodynamics (SPH) Capability for Naval Applications
• Vetting of structural design of CC Dam at Sippighat, Port Blair
• Technical vetting of structural design and drawings of 35 MLD STP in Maheshtala Municipality in the State of West Bengal under HAM.
• Checking structural health of two OHR in Bishnupur Municipality, West Bengal
• Vetting of design of foundation of 500 KL OHT at Banharishpur
• Structural health checking seven OHR and three CWR of Kharagpur Municipality
• Testing of materials for construction of 4-laning of Purulia Bypass Section from kn. 84.030 to km 83.345 of NH32 in state of West Bengal
• Vetting of Structural design and drawing of station G+1 building at Panskura
• Review of Structural Design and Drawings of ESR (150 KL Capacity and Staging Height of 25 m) Located at Garikhas Under âÂ?Â?Garikhas-Kajri Rural Pipe Water Supply SchemeâÂ? in Medininagar Division in Palamu District
• Technical vetting of foundations of OHR of different capacities
• Review of Structural Drawing of the ESR (100 kl Capacity and Staging Height of 24 m) Under Koderma, Domchanch, Jayanagar Mega Scheme RWSS in Village Nimadih Under Domchanch Block
• Development of Ramie Fibre-based Cost Effective Protective Shield Against Impact and Blast
• Structural safety audit of administrative building and canteen building at IOCL Haldia
• Health assessment of one number old overhead reservoir (OHR) at Egra Municipality
• Technical vetting of Hydraulic and Process design, flow diagram, GA drawing and structural design and drawing of PWSS at Malda under PHED
• Technical vetting of Hydraulic and Process design, flow diagram, GA drawing and structural design and drawing of PWSS at Malda, Mathurapur
• Proof Checking of NDT Reports, Repair Methodology of Fire Damaged Structure at Ishwar Gupta Setu, Kalyani, West Bengal
• Technical Vetting of Recommendations based on UPV and Core test results and Repairing procedure for the distressed part of concrete of 150m high RCC chimney of Unit 7, Khalgaon, Bihar
• Technical vetting 158 MLD WTP at Purulia District
• Structural Health Assessment of Midnapore College (Second Campus)
• Technical vetting of different components of WTP in Kumarganj block of Dakshin Dinajpur district
• Technical vetting of 5 no. FSTP of different capacities based on EMSDB
• Technical vetting of hydraulic and process design and structural design of 5 nos. FSS treatment plants of different capacities based on EDMSB
• Technical vetting of structural design and drawings, mechanical design and drawings of FSTP at Raghabpur, Purulia II Dev Block
• Technical Vetting of 20KLD FSTP in Mahishadal Panchayet Samity, Purba Medinipur, LALITA
• Technical vetting of structural design and construction drawing for the proposed project of 5.57 MLD Punarbhaba river and 5.92 MLD for Tangon River in Malda District
• Technical vetting of the pile foundation of 500 KL OHR at Siliguri
• Vetting of structural design and drawings of 65 MLD STP at Garden Reach, Kolkata
• Technical vetting of FSTP at Jalpaiguri
• Technical vetting of FSTP at Kalna-1 Block, Purba Bardhaman
• Ramic fiber in defence applications Development of low-cost protective units
• Technical Vetting of Hydraulic and Process Design, Flow Diagram, Treatment Technology, General Arrangement with all structural Design and Construction Drawing For Pollution Abatement works of North Barrackpore Project
• Technical vetting of hydraulic and structural design and drawings of 30 KLD FSTP based on EDMSB at Bardhaman-1 Block under Purba Bardhaman District
• Technical vetting of 30 KLD FSTP at Durgapur
• Vetting of process hydraulic and structural design and drawing of 30 KLD FSTP at Rajarhat
• Technical vetting of WTP at Siliguri
• Technical vetting of structural drawings of four goomties and one main building at Mecheda Station
• Reviewing structural design and drawing, and waterproofing methodology for Tarson newly constructed commercial building at Fortune Industrial Park at Pachla, Howrah,
• Technical vetting of 30KLD FSTP at Tehatta Block, Nadia
• Health assessment of 4 residential blocks situated in phase II portion of RBI staff quarter at Dumdum based on visual inspection and available NDT results
• Qualitative assessment of the health of precast concrete girders and deck slabs for the proposed 6 Lane elevated connector between Belghoria Expressway and Kalyani Expressway including widening of Kalyani Expressway based on UPV tests
• Quality Investigation of Materials
• Reviewing hydraulic and hydrological calculations and technical vetting of structural design and drawing of P-8, P-12, P-13, P35 and P-37 foundations of proposed Vikramshila bridge
• Technical vetting of structural design and drawings of two goomties and one EI building at Nalpur station
• Technical vetting of structural design and drawing of precast and cast-in-situ box drain with/ without vehicles
• Technical Vetting of 10 KLD FSTP at Raghunathpur II Block, Purulia District
• Technical vetting of design and drawings of 3 KLD FSTP at Manbazar I Block, Purulia District
• Technical vetting of 3 Nos. FSTP of various capacities for MBL

Co-Principal Investigator

• An integrated computational and experimental approach to structural design for ballistic impacts and blasts
• Analysis of a Pump Barge installed in River Bramhaputra
• Analysis of Seven HDPE Pontoon Bredge
• Assessment of structural health of SBI officers residential complex at 19C and 19D, Golf Club, Tollygunge, Kolkata-700033
• Design approval of steel framework
• Four Laning of Rewa-Katni-Jabalpur Section of NH-7 (From km 242.60 to km. 397.00), in the State of Madhya Pradesh Under NHDP-IV on EPC Mode-Detailed Checking of Structural Designs of Consultancy Services
• Guideline for sequence and dismantling of an old workshop
• Health assessment report of existing Main Auditorium Dome structure of Science City, Kolkata
• Hydrostatic and structural analysis of a Gangway operated in River Basin
• Preparation for Feasibility Report and Concept Plan for Intake Arrangement on Teesta River for Water Supply Project in Kalimpong
• Proof Check of Construction of Lateral Road along Indo-Pak Border in Gurdaspur Sector under Punjab Frontier (Fence Post and Foundation Block)
• Proof checking of the proposal on the Old Herbarium House, Howrah Botanical Garden
• Rural Spatial Planning in Gram Panchayats
• Services for Structural Stability Audit of Old Building of Old Mint, S. R. Cell, Kolkata
• Stability and Structural Analysis of 12 HDPE Floating Jetties
• Vetting of Design and Drawings of Foundation and Substructure (3rd and 4th Line, at Bina-Jhansi Section) of Bridge No. 992
• Vetting of Design and Scheme of 1 MWp Solar Power Plant at MES Barrackpore
• Vetting of Design and Scheme of 50KW Rooftop Solar Power Plant at MES Bamrauli
• Vetting of Structural Design & Drawings for G+5 Storeyed building of Belda College
• Vetting of structural design and drawing of 69 MLD WTP at Sankrail Block
• Vetting of structural design calculation and GA drawings of bridge nos. 133/2, 145/3, 154/3, 165/2, 166/1 and 175/1 of NH-60.
• Vetting of Structural Design of Foundation 2 OHR of Capacity 1000KL and 1500KL Developed by PHED
• Vetting of structural drawings for construction of G+1 RCC buildings
• Vetting of structural drawings for New 4 MGD Water Supply Project