Indian Institute of Technology Kharagpur |

Journal

Analysis of the Dissolved Surface of NiTi Shape Memory Alloy in Electrochemical Micromachining Process Using Potentiodynamic Polarization and EIS Techniques by Sethi A., Saha P. Journal of The Electrochemical Society 172 023507- (2025)
Heterogeneous adhesive bonding between different CFRPs and Al 7075 after different surface treatments: A study on the selective practical applicability of the resin pre coating (RPC) technique by Kundu J., Sethi A. , Mandal S. , Saha P. Polymer Composites. - (2025)
Investigation on the effect of KrF excimer laser treatment on the microstructure, chemical composition and surface topography of WC-Co composite by Kundu J., Das S. S., Krishna J. N., Saha P. Optics & Laser Technology 188 112944- (2025)
Evaluation of feature dimensions and roughness in a single pass electrochemical micro-milling for fabrication of 3D micro-feature on Nitinol Shape Memory alloy by Sethi A., Acharya B. R., Malayath G. , Saha P. Materials Today Communications 45 112325- (2025)
The Effect of Process Parameters and Post-fabrication Heat Treatment on the Microstructure and Mechanical Properties of Martensitic Steel SS420 Developed through Laser Powder Bed Fusion Technique by Chakraborty R., Mandal . , Mohanty I. , Bagui S. , Kumar N. S., Raju K. V., Saha P. Journal of Materials Engineering and Performance - (2025)
Machine learning prediction of erosion resistance of laser-clad coatings on martensitic stainless steel for steam turbine blades by Mandal I., Kumar V. , Saha P. Journal of Micromanufacturing - (2025)
A study integrating in-process thermal signatures, microstructure, and corrosion behaviour of AISI 316L coatings on low carbon steel substrate deposited by laser-directed energy deposition (L-DED) by Sethi A., Mohanty I. , Misra S. , Chakraborty R. , Saha P. Surface and Coatings Technology 493 131268- (2024)
Parametric optimization of micro-tool fabrication through sheet-EDG using nature-inspired algorithms by Acharya B. R., Sethi A. , Das A. K., Saha P. , Pratihar D. K. Journal of the Brazilian Society of Mechanical Sciences and Engineering 46 - (2024)
Multi-sensor-based process monitoring and quality assessment during laser forming of novel titanium foam to prevent cellular structure damage by Raza M. S., Mukherjee S. , Datta S. , Saha P. Journal of Manufacturing Processes 120 595-615 (2024)
Laser beam welding of NiTinol sheets in butt joint arrangement and optimization of the process using desirability function analysis and metaheuristic techniques by Datta S., Raza M. S., Das A. K., Saha P. , Pratihar D. K. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 238 2080-2093 (2024)
Fabrication of a prototype of bumper beam by single point incremental forming of laser welded tailored blank and characterization of its quasi-static crushing performance by Katiyar B. S., Panda S. K., Saha P. Archives of Civil and Mechanical Engineering 24 - (2024)
Development of Beta-Phase Strengthened Ti Alloys With Improved Mechanical and Tribological Properties via Laser-Material Deposition by Mohanty I., Misra S. , Kar S. K., Saha P. Proceedings of the ASME 2024 19th International Manufacturing Science and Engineering Conference. Volume 1: Additive Manufacturing; Advanced Materials Manufacturing; Biomanufacturing; Life Cycle Engineering. Knoxville, Tennessee, USA. June 17 21, 2024. V001T01A009. ASME 1 09- (2024)
Study of phase evolution, mechanical, and tribological behaviour of a novel -phase strengthened Ti-alloy with Fe and Co alloying via a laser material deposition route by Mohanty I., Misra S. , Kar S. K., Saha P. Journal of Alloys and Compounds 1007 176469- (2024)
Effects of thermal ageing time and temperature during heat-treatment on the mechanical properties of fiber laser welded Nb-1%Zr-0.1%C alloy in continuous wave mode by Gupta S. K., Jaypuria S. , Pratihar D. K., Saha P. Materials Characterization 206 - (2023)
Design and Additive Manufacturing of Acetabular Implant with Continuously Graded Porosity by Mukherjee S., Dhara S. , Saha P. Bioengineering 10 675-685 (2023)
Multi-objective optimization in electrochemical micro-drilling of Ti6Al4V using nature-inspired techniques by Acharya B. R., Sethi A. , Das A. K., Saha P. , Pratihar D. K. Materials and Manufacturing Processes 38 1942-1954 (2023)
High aspect ratio shaped microtool fabrication using sheet-EDG by Acharya B. R., Sethi A. , Saha P. , Pratihar D. K. Materials and Manufacturing Processwes - (2023)
Real-time monitoring of process current and its correlation with micro-feature accuracy and surface topography in electrochemical micromachining of nitinol by Sethi A., Acharya B. R., Saha P. Engineering Research Express 5 - (2023)
Study on pulsed wave mode laser welding of Nb-Zr-C alloy and many-objective optimization using meta-heuristic techniques by Gupta S. K., Jaypuria S. , Gupta A. K., Pratihar D. K., Saha P. Welding in the World 67 2535-2555 (2023)
An investigation to compare the shear strength of the adhesive joint of unidirectional CFRP after KrF excimer laser treatment in normal atmosphere, argon and underwater environments by Kundu J., Mishra S. , Mandal S. , Saha P. Composites Part A 173 107662- (2023)
Numerical simulation of KrF excimer laser treatment of unidirectional, plain weaved and 4-Harness Satin weaved CFRP using simplified geometric models and differential thermal conductivity by Kundu J., Mandal S. , Raza M. S., Saha P. Optics and Laser Technology 168 109968- (2023)
Comparative study on weld characterisation and corrosion performance of laser-welded NiTinol by Datta S., Chakraborti R. , Raza M. S., Saha P. , Pratihar D. K. Science and Technology of Welding and Joining 28 792-802 (2023)
Effect of Circular Hole Discontinuities on Crushing Characteristics of Combined Geometry Shells of Tailor Welded Blanks by Katiyar B. S., Panda S. K., Saha P. Journal of Materials Engineering and Performance 33 3034-3049 (2023)
Parametric investigation of pulse frequency and microtool rotational speed for precise fabrication of microchannels on nitinol shape memory alloy through ECMM by Sethi A., Acharya B. R., Saha P. Materials Today Communications 36 106844- (2023)
Corrosion Analysis of Welded Nb-1% Zr-0.1% C Alloy in Lead-Bismuth Eutectic solution by Gupta S. K., Jaypuria S. , Pratihar D. K., Saha P. Journal of Alloys and Compounds 968 - (2023)
The effect of different laser head angles and shielding gas supply systems to maximize the depth of penetration by minimizing the plasma shielding effect in fiber laser welding of 3-mm thick NiTinol sheet by Datta S., Raza M. S., Muvvala G. , Saha P. , Pratihar D. K. Optik 283 - (2023)
A comparative study on the adhesive bonding strength of unidirectional, 4-Harness Satin weaved and plain weaved carbon fibre reinforced polymer after KrF excimer laser pre-treatment by Kundu J., Mandal S. , Saha P. Applied Surface Science 592 - (2022)
Quasistatic deformation analysis of melt-based molded die-cast open-cell aluminum alloy foam by Raza M. S., Datta S. , Saha P. Archives of Civil and Mechanical Engineering 23 - (2022)
Microstructural evolution and nanoindentation study of magnetic pulse welded Nitinol and Aluminium sheets by Mandal M., Patra S. , Chakraborty R. , Saha P. , Shome M. Materials Characterization 184 - (2022)
Study of the electrochemical dissolution behavior of Nitinol shape memory alloy in different electrolytes for micro-ECM process by Sethi A., Acharya B. R., Saha P. The International Journal of Advanced Manufacturing Technology 7019-7035 (2022)
Study on laser beam butt-welding of NiTinol sheet and input-output modelling using neural networks trained by metaheuristic algorithms by Datta S., Das A. K., Raza M. S., Saha P. , Pratihar D. K. Materials Today Communications 32 - (2022)
Electrochemical Dissolution of WC-Co Micro-Tool in Micro-WECM Using an Eco-Friendly Citric Acid Mixed NaNO3 Electrolyte by Sethi A., Acharya B. R., Saha P. Journal of The Electrochemical Society 169 - (2022)
Investigation of IR pyrometer-captured thermal signatures and their role on microstructural evolution and properties of Inconel 625 tracks in DED-based additive manufacturing by Misra S., Mohanty I. , Raza M. S., Chakraborti R. , Chatterjee P. , Saha P. , Kumar C. S. Surface and Coatings Technology 447 - (2022)
Application of non-associated flow rule for prediction of nonuniform material flow during deep drawing of tailor welded blanks by Bandyopadhyay K., Basak S. , Panda S. K., Saha P. , Zhou N. Proc IMechE Part B: J Engineering Manufacture - (2022)
Experimental and numerical analyses on crushing behaviour of drawn cups of laser welded tailored blanks under axial loading by Katiyar B. S., Panda S. K., Saha P. Archives of Civil and Mechanical Engineering 22 - (2022)
Enhanced corrosion, tribocorrosion resistance and controllable osteogenic potential of stem cells on micro-rippled Ti6Al4V surfaces produced by pulsed laser remelting by Mukherjee S., Dhara S. , Saha P. Journal of Manufacturing Processes 65 119-133 (2021)
Monitoring and analysis of melt-assisted deformation behavior of 304L stainless steel during multipass laser forming process using IR pyrometer and laser-based displacement sensor by Raza M.S., Datta S., Gopinath M., Saha P. Optics and Laser Technology 135 106718- (2021)
Experimental investigation on mechanical strength of laser welded Nb-1%Zr-0.1%C alloy by Gupta S., Jaypuria S. , Pratihar D. K., Saha P. Materials Engineering and Performance - (2021)
Experimental Investigation on Microstructure and Mechanical Properties of Laser-Welded Nb-1% Zr-0.1% C Alloy by Gupta S. K., Jaypuria S. , Pratihar D. K., Saha P. Journal of Materials Engineering and Performance 30 8412-8425 (2021)
Micro-mechanical and X-Ray micro-computed tomographical analysis of quasi-static three-point loading behaviour of closed-cell aluminium foam with and without epoxy-bonded aluminium face-sheet by Raza M. S., Datta S. , Saha P. Materials Science and Engineering: A 809 - (2021)
Quasi-static crushing behavior of stretch formed domes of laser welded tailored blanks by Katiyar B. S., Panda S. K., Saha P. Thin-Walled Structures 159 107288- (2021)
Thermal and morphological analysis of the interaction effect of different assist gases with gas-filled closed-cell aluminium foam during laser cutting process by Raza M. S., Datta S. , Saha P. Proc IMechE Part B: J Engineering Manufacture 1-12 (2020)
Parametric Optimization for Autogenous Butt Laser Welding of Sub-Millimeter Thick SS 316 Sheets using Central Composite Design by Saha P., Waghmare D. Optics and Laser Technology 122 - (2020)
Experimental investigations and parametric optimization of laser beam welding of NiTinol sheets by metaheuristic techniques and desirability function analysis by Datta S., Raza M.S., Das A.K., Saha P., Pratihar D.K. Optics and Laser Technology 124 - (2020)
Experimental investigations and parametric optimization of laser beam welding of NiTinol sheets by metaheuristic techniques and desirability function analysis by Datta S., Das A. K., Pratihar D. K., Raza M. S., Saha P. Optics and Laser Technology 124 - (2020)
Study on mechanical and metallurgical properties of fiber laser welded Nb-1%Zr-0.1%C alloy by Gupta S. K., Jaypuria S. , Pratihar D. K., Saha P. Optics and Laser Technology 127 1061153- (2020)
Study on mechanical and metallurgical properties of fiber laser welded Nb-1% Zr-0.1% C alloy by Gupta S.K., Jaypuria S., Pratihar D.K., Saha P. Optics and Laser Technology 127 - (2020)
Study on mechanical performance of laser-welded NiTinol sheet by Datta S., Raza M. S., Saha P. , Pratihar D. K. Proc IMechE Part B: J Engineering Manufacture - (2020)
Study on Mechanical performance of laser welded NiTinol sheet by Datta S., Raza M. S., Saha P. , Pratihar D. K. IMechE Part B, Journal of Engineering Manufacture - (2020)
Parametric study of laser cutting of carbon fibre reinforced polymer (CFRP) and the effect of fibre orientation on cutting quality by Raza M. S., Datta S. , Bule B. , Saha P. Advances in Materials and Processing Technologies 5 - (2019)
Excimer laser cleaning of black sulphur encrustation from silver surface by Raza M. S., Das S. S., Tudu P. , Saha P. Optics and Laser Technology 113 95-103 (2019)
Reverse Engineering Approach for Customized Dental and Maxillofacial Implants of Alumina Fibre Reinforced Composite by Mohanty S., Srivas P. K., Rameshbabu A. P., Saha P. , Dhara S. Materials Today: Proceedings 11 753-760 (2019)
A comparative outlook of corrosion behaviour and chlorophyll assisted growth kinetics of various carbon nano-structure reinforced hydroxyapatite-calcium orthophosphate coating synthesized in-situ through pulsed electrochemical deposition by R. C., Manna J. S., Das D. , Sen M. , Saha P. Applied Surface Science 475 28-42 (2019)
A comparative study of surface characterization and corrosion performance properties of laser surface modified biomedical grade nitinol by Chakraborty R., Datta S. , Raza M. S., Saha P. Applied Surface Science 469 753-763 (2019)
Fabrication of high aspect ratio cylindrical tungsten micro tool by reverse micro-ECM process by Sethi A., Achariya B. R., Saha P. Internation Journal of Precision Technology 8 - (2019)
Effects of Heat Input on Weld-Bead Geometry, Surface Chemical Composition, Corrosion Behavior and Thermal Properties of Fiber Laser-Welded Nitinol Shape Memory Alloy by Datta S., Raza M. S., Saha P. , Pratihar D. K. Journal of Materials Engineering and Performance 28 2754-2763 (2019)
Effects of process parameters on the quality aspects of weld-bead in laser welding of NiTinol sheets by Datta S., Raza M. S., Saha P. , Pratihar D. K. Materials and Manufacturing Processes 34 648-659 (2019)
Surface Modification of High-Carbon Steel Using Fiber Laser and Its Thermal, Microstructural and Tribological Analysis by Raza M. S., Datta S. , Vivekanand K. , Saha P. Journal of Materials Engineering and Performance 28 1873-1883 (2019)
Electrical power generation from wet textile mediated by spontaneous nano-Scale evaporation by Das S. S., Pedireddi V. M., Bandopadhyay A. , Saha P. , Chakraborty S. Nano Letters 7191-7200 (2019)
Fibre laser cutting of thick closed cell aluminium foam: morphological analysis and its parametric optimisation by Raza M. S., Datta S. , Singh J. , Saha P. International Journal of Precision Technology 8 - (2019)
Electrochemical stability and bio-mineralization capability of zinc substituted and elemental zinc reinforced calcium phosphate composite coatings synthesized through pulsed electro-deposition by Chakraborty R., Mandal M. , Saha P. Ceramics International 45 22899-22911 (2019)
Development and relative comparison of polypyrrole-calcium phosphate composite coatings with differential concentration of chlorophyll functionalized polymer particle achieved through pulsed electro deposition by Chakraborty R., Manna J. S., Saha P. Surface and Coatings Technology 363 221-235 (2019)
Electrochemical stability and bio-mineralization capability of zinc substituted and elemental zinc reinforced calcium phosphate composite coatings synthesized through pulsed electro-deposition by Chakraborti R., Mandal M. , Saha P. Ceramics International 45 22899-22911 (2019)
Synthesis and characterization of nickel free titanium hydroxyapatite composite coating over Nitinol surface through in-situ laser cladding and alloying by Chakraborty R., Raza M. S., Datta S. , Saha P. Surface and Coatings Technology 358 539-550 (2019)
Electrokinetic Trapping of Microparticles Using Paper-and-Pencil Microfluidics by Das S. S., Kar S. , Dawn S. , Saha P. , Chakraborty S. PHYSICAL REVIEW APPLIED 12 - (2019)
Synthesis, characterization and cytocompatibility assessment of hydroxyapatite-polypyrrole composite coating synthesized through pulsed reverse electrochemical deposition by Chakraborty R., Seesala V. S., Manna J. S., Saha P. , Dhara S. Materials Science and Engineering: C 94 597-607 (2019)
Exploring the possibility of dissimilar welding of NiTi to Ti using Yb-fiber laser by Datta S., Raza M. S., Kumar S. , Saha P. Advances in Materials and Processing Technologies 4 614-625 (2018)
Identifying defects and problems in laser cladding and suggestions of some remedies for the same by Haldar B., Saha P. Materials Today: Proceedings 5 13090-13101 (2018)
Abrasive Jet System And Its Various Applications In Abrasive Jet Machining, Erosion Testing, Shot-Peening, And Fast Cleaning by Haldar B., Ghara T. , Ansari R. , Das S. , Saha P. Materials Today: Proceedings 5 13061-13068 (2018)
A comparative study on surface morphology and electrochemical behaviour of hydroxyapatite-calcium hydrogen phosphate composite coating synthesized in-situ through electro chemical process under various deposition conditions by Chakraborti R., Saha P. Surfaces and Interfaces 12 160-167 (2018)
Multicomponent laser coating developed on Ti-6Al-4V using hBN, Ni-coated-graphite, Ni and Ti powders for improving tribological performance by Haldar B., Srivastva V. K., Keshvendra K. , Saha P. Materials Today: Proceedings 5 13495-13503 (2018)
Comparison of Osteoconduction, cytocompatibility and corrosion protection performance of hydroxyapatite-calcium hydrogen phosphate composite coating synthesized in-situ through pulsed electro-deposition with varying amount of phase and crystallinity by Chakraborty R., Seesala V.S., Sengupta S., Dhara S., Saha P., Das K., Das S. Surfaces and Interfaces 10 1-10 (2018)
Problems on the development of hard and low friction in-situ coatings on Ti-6Al-4V using laser cladding by Haldar B., Saha P. Procedia Manufacturing 20 446-451 (2018)
Hydroelectric power plant on a paper strip by Das S. S., Kar S. , Anwar T. , Saha P. , Chakraborty S. Lab on a Chip 18 1560-1568 (2018)
Synthesis and characterization of MWCNT reinforced nano-crystalline copper coating from a highly basic bath through pulse electrodeposition by Chakraborty R., Sengupta S. , Das S. , Saha P. , Das K. Surfaces and Interfaces 9 28-35 (2017)
MWCNT reinforced bone like calcium phosphate Hydroxyapatite composite coating developed through pulsed electrodeposition with varying amount of apatite phase and crystallinity to promote superior osteoconduction, cytocompatibility and corrosion protection performance compared to bare metallic implant surface by Chakrabirty R., Seesala V. S., Sen M. , Sengupta S. , Dhara S. , Saha P. , Das K. , Das S. Surface and Coatings Technology 325 496-514 (2017)
Formability assessment and failure prediction of laser welded dual phase steel blanks using anisotropic plastic properties by Bandyopadhyay K., Lee M. , Panda S. K., Saha P. , Lee J. International Journal of Mechanical Sciences 126 203-221 (2017)
Laser surface remelting of Ti and its alloys for improving surface biocompatibility of orthopaedic implants by Mukherjee S., Dhara S. , Saha P. Materials Technology 33 106-118 (2017)
Synthesis of calcium hydrogen phosphate and hydroxyapatite coating on SS316 substrate through pulsed electrodeposition by Chakraborty R., Sengupta S. , Saha P. , Das K. , Das S. Materials Science and Engineering: C 69 875-883 (2016)
Optimization of Fiber Laser Welding of DP980 Steels Using RSM to Improve Weld Properties for Formability by Bandyopadhyay K., Panda S. K., Saha P. Journal of Materials Engineering and Performance 25 2462-2477 (2016)
Microstructures and failure analyses of DP980 laser welded blanks in formability context by Bandyopadhyay K., Panda S. K., Saha P. , Hernandez V. B., Zhou Y. N. Materials Science and Engineering: A 652 250-263 (2016)
Limiting drawing ratio and deep drawing behavior of dual phase steel tailor welded blanks: FE simulation and experimental validation by Bandyopadhyay K., Panda S. K., Saha P. , Padmanabham G. Journal of Materials Processing Technology 217 48-64 (2015)
Enhancing the biocompatibility of Ti6Al4V implants by laser surface microtexturing: an in vitro study by Mukherjee S., Dhara S. , Saha P. The International Journal of Advanced Manufacturing Technology 76 5-15 (2015)
Use of stress based forming limit diagram to predict formability in two-stage forming of tailor welded blanks by Bandyopadhyay K., Basak S. , Panda S. K., Saha P. Materials & Design 67 558-570 (2015)
An experimental investigation of surface modification of C-40 steel using W Cu powder metallurgy sintered compact tools in EDM by Patowari P. K., Mishra P. , Saha P. K. The International Journal of Advanced Manufacturing Technology 80 343-360 (2015)
Influence Of Surface Roughness Parameters On Mg63 Cell Viability: A Study On Laser Microtextured Ti6Al4V Surfaces by Mukherjee S., Dhara S. , Saha P. The International Journal of Artificial Organs 37 590- (2014)
In-situ multi-component MMC coating developed on Ti-6Al-4V substrate by Haldar B., Karmakar S. , Saha P. , Chattopadhyay A. B. Surface Engineering 30 256-262 (2014)
Investigations into the influence of weld zone on formability of fiber laser welded advanced high strength steel by Bandyopadhyay K., Panda S. K., Saha P. Journal of Materials Engineering and Performance 23 1465-1479 (2014)
Experimental investigation on micro-electrochemical sinking operation for fabrication of micro-holes by Das A. K., Saha P. Journal of the Brazilian Society of Mechanical Sciences and Engineering 57 657-663 (2014)
Fabrication of cylindrical micro tools by micro electrochemical form turning operation by Das A. K., Saha P. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 228 74-81 (2014)
Development and characterization of hard and wear resistant MMC coating on Ti-6Al-4V substrate by laser cladding by Dhanda M., Haldar B. , Saha P. Procedia Materials Science 6 1226-1232 (2014)
Development of an in-situ multi-component reinforced Al-based metal matrix composite by direct metal laser sintering technique Optimization of process parameters by Ghosh S. K., Bandyopadhyay K. , Saha P. Materials Characterization 93 68-78 (2014)
Multi-objective optimization in wire-electro-discharge machining of TiC reinforced composite through Neuro-Genetic technique by Saha P., Tarafdar D. , Pal S. K., Saha P. , Srivastava A. K., Das K. Applied Soft Computing 13 2065-2074 (2013)
Modeling of wire-electro-discharge machining of TiC/Fe in-situ metal matrix composite using normalized RBFN with enhanced k-means clustering technique by Saha P., Tarafdar D. , Pal S. K., Saha P. , Srivastava A. K., Das K. The International Journal of Advanced Manufacturing Technology 43 107-116 (2009)
Soft computing models based prediction of cutting speed and surface roughness in wire electro-discharge machining of tungsten carbide cobalt composite by Saha P., Singha A. , Pal S. K., Saha P. International Journal of Advanced Manufacturing Technology 39 74-84 (2008)
Modeling of electrical discharge machining process using backpropagation neural network and multi-objective optimization using non-dominating sorting genetic algorithm-II by Mandal D., Pal S. K., Saha P. Journal of Materials Processing Technology 186 154-162 (2008)
Backpropagation neural network based modeling of multi-responses of an electrical discharge machining process by Mandal D., Pal S. K., Saha P. International Journal of Knowledge-Based and Intelligent Engineering Systems 11 105-113 (2007)
An experimental design approach to selective laser sintering of low carbon steel by Chatterjee A. N., Chatterjee A. N., Kumar S. , Saha P. , Mishra P. K., Choudhury A. R. Journal of Materials processing technology 136 151-157 (2003)

Conferences

Effect of Fe Alloying on Phase Evolution, Microstructure, Mechanical and Tribological Properties of Ti64 Alloy via Laser Material Deposition by Mohanty I., Misra S. , Kar S. K., Saha P. TMS 2025 154th Annual Meeting & Exhibition (TMS 2025) 101-112 (2025)
Online Monitoring of Infrared Pyrometer Captured Thermal Signature for Prediction of Iron Dilution and its Effect on Corrosion Properties of Laser Deposited Inconel 625 Coating on SS 304L by Misra S., Mohanty I. , Kumar C. S., Saha P. Proceedings ASME 2024 19th International Manufacturing Science and Engineering Conference V001T01A0- (2024)
Laser directed energy deposition of super duplex stainless steel 2507 on SS 420 with and without application of magnetic field by Mandal I., Mohanty I. , Saha P. International Conference on Precision Meso Micro Nano Engineering (COPEN 13) - (2024)
Analyzing Online Thermal Signature for Bead Geometry and Microstructure in Laser Material Deposition (LMD) of NiCoCrAlYHfSi for Gas-Turbine Components by Nandi S., Patra P. , Saha P. , Dan P. K. 9th International & 30th All India Manufacturing Technology, Design & Research Conference (AIMTDR 2023) - (2023)
Development of Novel Ti64-Fe-Co-based -Titanium Alloy with Improved Strength and Elongation Properties Using Laser Processing Route by Mohanty I., Misra S. , Kar S. K., Saha P. 9th International & 30th All India Manufacturing Technology, Design & Research Conference (AIMTDR 2023) - (2023)
A Numerical Study on KrF Excimer Laser Ablation of Unidirectional CFRP Using Simplified Geometric Models with Two Separate Strategies by Kundu J., Mandal S. , Saha P. 9 th International & 30 th All India Manufacturing Technology, Design & Research Conference AIMTDR 2023 - (2023)
Effect of addition of CNT in mitigating dissociation of B4C and in situ formation of TiC on Ti64 substrate during La-ser Cladding process to achieve hard condensed coating by Raza M. S., Patra P. , Saha P. 9th International & 30th All India Manufacturing Technology, Design & Research Conference (AIMTDR 2023) - (2023)
Effect of weld zone and forming histories on crushing behavior of domes of laser welded blanks by Katiyar B. S., Panda S. K., Saha P. 9th International & 30th All India Manufacturing Technology, Design & Research Conference (AIMTDR 2023) - (2023)
Electrochemical Micromachining and Potentiodynamic Polarization Analysis of Nitinol Shape Memory Alloy in Ethylene Glycol-based Neutral Solutions by Sethi A., Acharya B. R., Saha P. 9 th International & 30 th All India Manufacturing Technology, Design & Research Conference AIMTDR 2023 - (2023)
Influence of Microtool s Shape and Size on Microchannel Fabrication through Micro-EDM by Acharya B. R., Sethi A. , Aher S. M., Saha P. , Pratihar D. K. 9 th International & 30 th All India Manufacturing Technology, Design & Research Conference AIMTDR 2023 - (2023)
Process Monitoring and Numerical Analysis of Mechanism of Laser Forming in Open-Cell Aluminium Foam by Raza M. S., Saha P. 9 th International & 30 th All India Manufacturing Technology, Design & Research Conference AIMTDR 2023 - (2023)
Machine Learning Prediction of Erosion Resistance of Laser Clad Coatings on Martensitic Stainless Steel for Steam Turbine Blade by Mandal I., Kumar V. , Saha P. International Conference On Material Processing Using Lasers & Surface Engineering - (2023)
Role of Laser Fluence on the Characteristics of AlSi10Mg Track Deposited through DED-L-based Additive Manu-facturing Technique by Misra S., Mohanty I. , Raj M. , Chakraborty R. , Saha P. 9th International & 30th All India Manufacturing Technology, Design & Research Conference (AIMTDR 2023) - (2023)
Material Utilization Efficiency-Guided Laser-Direct Energy Deposition of Inconel 718 Alloy Powder for Aeroengine Components by Patra P., Nandi S. , Saha P. , Dan P. K. 9th International & 30th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2023) - (2023)
KrF Excimer Laser Surface Treatment of Unidirectional and 4-Harness Satin Weaved Carbon Fibre Reinforced Polymer for Aerospace and Automotive Applications by Kundu J., Mandal S. , Saha P. Advances in Modern Machining Processes: Proceedings of AIMTDR 2021 421-433 (2022)
Effect of addition of -phase stabilizing elements on the microstructure and mechanical properties of Ti64 via laser-based processing route by Mohanty I., Mishra G. , Saha P. , Kar S. K. IIM ATM 2022 - (2022)
A Critical Study of Bead-on-Plate Laser Welding of Niobium Alloy PWC-11 by Gupta S.K., Datta S., Jaypuria S., Pratihar D.K., Saha P. Lecture Notes in Mechanical Engineering 397-404 (2020)
A critical study on bead-on-plate laser welding of Niobium alloy PWC-11 by Gupta S. K., Datta S. , Jaypuria S. , Pratihar D. K., Saha P. ICAMME Conf. 2019 - (2019)
Investigating the effect of process parameters and scan strategy during laser forming of thin open celled aluminium foam by Raza M.S., Srinu T., Datta S., Saha P. ASME 2018 13th International Manufacturing Science and Engineering Conference, MSEC 2018 4 - (2018)
Capillary driven electrokinetic power generator by Das S. S., Bandopadhyay A. , Saha P. , Chakraborty S. 71st Annual Meeting of the APS Division of Fluid Dynamics - (2018)
Numerical simulations and experimental verification of laser welding of Nylon 6 by Gupta S. K., Jaypuria S. , Pratihar D. K., Saha P. COMSOL Conf. 2018 - (2018)
Improvement of ionic bonding strength and electrochemical corrosion resistance of hydroxyapatite- calcium phosphate pulsed electro chemically deposited in-situ coating through hydroxyl ion treatment by Chakraborty R., Datta S., Raza M.S., Saha P. ASME 2018 13th International Manufacturing Science and Engineering Conference, MSEC 2018 1 - (2018)
Effects of line energy on mechanical properties, corrosion and shape memory behavior of laser-welded NiTinol joints by Datta S., Raza M.S., Saha P., Pratihar D.K. ASME 2018 13th International Manufacturing Science and Engineering Conference, MSEC 2018 4 - (2018)
Effect of welding speed on weld bead quality aspects in bead-on-plate laser welding of NiTinol by Yb-fiber laser by Datta S., Raza M. S., Saha P. , Pratihar D. K. 10th International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 10) - (2017)
A comparative study of micro-tool fabrication methods using micro-EDM by Acharya B. R., Sethi A. , Saha P. , Pratihar D. K. 10th International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 10) 210-213 (2017)
Parametric Optimization in WEDM of WC-Co Composite by Neuro-Genetic Technique by Saha P., Saha P. , Pal S. K. Proceedings of the World Congress on Engineering 2011 Vol III - (2011)
Modeling and Multi-Objective Optimization in Wire Electro-Discharge Machining of in-situ TiC reinforced austenitic manganese steel matrix composite by Saha P., Pal S. K., Saha P. National Conference on Recent Advances in Manufacturing Technology and Management (RAMTM 2010) - (2010)
A neural network approach for modeling the wire electro discharge machining of tungsten carbide cobalt composite by Saha P., Singh A. , Pal S. K., Saha P. Proceedings of the Global Conference on Production and Industrial Engineering, CPIE-2007 - (2007)
Application of fully supervised radial basis function network for prediction of machining performance in wire-EDM by Saha P., Pal S. K., Saha P. International Conference of Precision, Meso, Micro and Nano Engineering (COPEN 2007) - (2007)
Modelling of electric discharge machining using artificial neural network by Mandal D., Pal S. K., Saha P. Proceedings of the National Conference on Soft Computing Techniques for Engineering Applications 153-158 (2006)
A survey of soft computing methods used in Wire-EDM by Saha P., Pal S. K., Saha P. Proceedings of the 12th National Conference on Machines and Mechanisms 243-248 (2005)

Symposium

Effect of Novel -eutectoid Alloying for Improved Mechanical and Tribological Properties of Titanium via Laser Material Deposition by Mohanty I., Misra S. , Kar S. K., Saha P. 78 Annual Technical Meeting of Indan Institute of Metals 631- (2025)

Book Chapter/Section

Laser Welding of Thin Ferrous Sheets with Ferrous and Non-Ferrous Sheets by Waghmare D. B., Saha P. Laser Welding of Thin Ferrous Sheets with Ferrous and Non-Ferrous Sheets - (2024)
Comparison of Single-and Multiple-Spot Resistance Welding of Sub-millimeter Thick SS304 and SS316 Sheets by Waghmare D. B., Saha P. Advances in Additive Manufacturing and Joining 461-473 (2020)
Realization of Green Manufacturing Using Citric Acid Electrolyte for WC-Co Alloy Micro-tool Fabrication in Micro-WECM by Abhijeet S., Acharya B. R., Saha P. ADVANCES IN UNCONVENTIONAL MACHINING AND COMPOSITES 211-223 (2020)
A study on micro-tool and micro-feature fabrication in micro-EDM by Acharya B. R., Sethi A. , Dindigala A. , Saha P. , Pratihar D. K. Advances in Unconventional Machining and Composites 191-202 (2019)
TiC, W2C Reinforced Ti-W MMC Coating Developed on Ti-6Al-4V Substrate Through Laser Cladding by Gattani P., Haldar B. , Azeem A. , Saha P. CAD/CAM, Robotics and Factories of the Future 253-262 (2016)
Prediction of formability of bi-axial pre-strained dual phase steel sheets using stress-based forming limit diagram by Basak S., Bandyopadhyay K. , Panda S. K., Saha P. Advances in Material Forming and Joining 167-192 (2015)
Selective laser sintering: a case study of tungsten carbide and cobalt powder sintering by pulsed Nd: YAG laser by Ghosh S. K., Das A. K., Saha P. Lasers Based Manufacturing 441-459 (2015)

Patent

Acetabular cup implant and a method for additive manufacturing of the same based on geodesical dome approach with continuous radially graded porosity (Status: Granted, Granted Patent No. 424742 for Patent Application No. 201631025559) by Mukherjee S., Dhara S. , Saha P. - (2023)
Electrokinetic Power Harvesting From Wet Textile (Status: Filed, serial no 201931007738 dated February 27, 2019) by Das S. S., Bandopadhyay A. , Saha P. , Chakraborty S. - (2019)
A spindle assembly for micro-ECM/micro-EDM (Status: Granted, Granted Patent No. 303292) by Das A. K., Saha P. - (2018)
Preparation of porous structures with controlled and continuous variation by additive manufacturing (Status: Filed, Application No. 201631013286, published on 20.10.2017) by Mukherjee S., Dhara S. , Saha P. - (2017)
An on-line measurement of tool diameter in micro-ECM/micro-EDM (Status: Published in 28.06. 2013) by Das A. K., Saha P. - (2009)
A process of configurating micro-sized channels having improved inclination and for enhancement of boiling heat transfer over plane surface (Status: Granted, Granted Patent No.253807) by Das A. K., Saha P. , Das P. K. - (2009)