Indian Institute of Technology Kharagpur |

Patent

A system for in-situ reinforcement deposition friction stir processing for surface composite fabrication by Hoda M., Pal S. K., Paul J. - (2025)
A system for real time monitoring, prediction and control of weld quality in friction stir welding (Filed Ref No: 202031000072, Filing date: January 1, 2020). by Mishra D., Pal S. K., Gupta A. , Raj P. , Kumar A. , Anwer S. , Chakravarty D. , Pal S. , Chakravarty T. , Pal A. , Misra P. , Misra S. - (2024)
A method and system for automatically detecting weld defects in ultrasonic Time-of-Flight Diffraction (ToFD) by Vishwanathan A., Dutta A. K., Mukherjee A. , Pal S. K. - (2023)
An automated system for fuse box assembly inspection and fault detection and a method thereof by Ghosh S., Mypati O. , Nayak P. , Pal S. K. - (2023)
An automated system for printed circuit board inspection and fault detection and a method thereof by Srinivasan A., Mypati O. , Pal S. K. - (2023)
Cost-effective high-speed friction stir welding system for mass production of dissimilar metal structures and method thereof by Karmakar S., Swarnakar R. , Pal S. K. - (2023)
Fabrication of internally cladded bimetallic tubes and components through friction stir back extrusion by Swarnakar R., Karmakar S. , Pal S. K. - (2023)
Graphene-induced high conductive friction stir spot welded aluminum and copper tabs for Li-ion batteries by Mypati O., Polkampally P. K., Pal S. K., Srirangan P. - (2022)
A method for friction stir spiral tunneling (FSST) in pipe and a system to carry out such method (Filed Ref No: 202031010846, Filing date: March 13, 2020). by Sarkar P., Pal S. K., Bhattacharya A. , Mishra P. - (2020)
A system for fabrication of bonded metal foam metal sandwich structures and process thereof (Filed Ref No: 202031016609, Filing date: April 17, 2020). by Racherla V., Sharma V. M., Pal S. K. - (2020)
A system for solid state sintering of hollow metallic cylindrical components and a method of such sintering (Filed Ref No: 202031006307, Filing date: February 13, 2020). by Racherla V., Sharma V. M., Pal S. K. - (2020)
Low-cost real-time machine vision based quality inspection system, Filed Ref No: 202031050404 by Banerjee A., Mishra D. , Nayak P. , Pal S. K., Chakravarty D. - (2020)
Method and system for multi-sensor fusion using Transform Learning (Filed Ref. no. 202021036163, Filing date: August 21, 2020). by Kumar K., Chandra M. G., Kumar A. A., Majumdar A. , Mishra D. , Pal S. K. - (2020)
Real time surface defect analysis and correction in friction stir welding process by image processing (Filed Ref No: 201831035477, Filing date: September 20, 2018). by Pal S. K., Khan A. R., Ranjan R. , Parikh C. , Pal S. , Chakravarty D. , Maiti A. - (2018)
Cloud based system for real time monitoring and machine learning based controlling of friction stir welding process (Filed Ref. no.: 201831024813, Filing date: July 3, 2018) by Pal S. K., Basu Roy R. , Singh A. K., Barua A. , Kumar A. , Ghosh A. , Majumdar S. , R. , Mishra D. , Pal S. - (2018)
Add-on kit for doing cost effective, energy efficient, rapid, solid-state friction sintering on vertical milling/drilling/friction stir welding machines (Filed Ref No: 201731037839, Filing date: October 25, 2017). by Racherla V., Sharma V. M., Pal S. K. - (2017)
A counter rotating pin and shoulder tool arrangement for friction stir weld system (Filed Ref No: 201631016398, Filing date: May 11, 2016) by Pal S. K., Kumari K. , Mahto R. P., Sharma V. - (2016)
Counter rotating twin tool with variable gap setup for friction stir welding (Filed Ref No: 1297/KOL/2014, Filing date: December 15, 2014) by Pal S. K., Kumari K. , Sharma V. - (2014)

Journal

Atomic diffusion kinetics in IMC formation: A molecular dynamic insight into a novel friction stir backward extrusion cladding process by Swarnkar R., Mypati O., Pal S.K. Journal of Materials Processing Technology 339 118799- (2025)
Improvement of directional anisotropy and its impact on surface and mechanical properties of a rib-on-plate structure fabricated through friction stir processing of additively manufactured friction stir surfaced structure by Karmakar S., Pal S.K. Journal of Manufacturing Processes 134 90-106 (2025)
Characterizing Shunting Effects on Nugget Quality and Joint Strength in Sequential Spot Welds for Automotive Applications by Dutta A., Baskar M. , Pal S. K. Journal of Manufacturing Science and Engineering 147 071008- (2025)
Composites processed through counter-rotating twin-tool FSP: processing time and material homogeneity by Hoda M., Pal S. K., Paul J. Materials and Manufacturing Processes 1-13 (2025)
A high-speed numerical simulation method for diverse boundary conditions for real time applications unleashing MeshGraphNet by Mukherjee A., Pal S.K., Chakravarty D. Engineering Analysis with Boundary Elements 175 106204- (2025)
A hybrid digital twin for monitoring and controlling weld quality in friction stir welding by Nayak S.S., Iqbal M.P., Krishna A., Mishra D., Pal S.K., Bhogineni S.K. International Journal of Computer Integrated Manufacturing 1-17 (2025)
A novel counter-rotating twin-tool friction stir processing technology for fabrication of Al/SiC surface composite with improved particle distribution by Hoda M.N., Pal S.K., Paul J. CIRP Journal of Manufacturing Science and Technology 49 1-13 (2024)
A novel zero tool defect accelerated friction stir thin sheet welding technique for automotive light-weight structural component fabrication with dissimilar material by Karmakar S., Swarnkar R., Pal S.K. Materials Chemistry and Physics 316 129075- (2024)
A computationally efficient multiphysics model for friction stir welding with polygonal pin profiles by Nayak S.S., Iqbal M.P., Jain R., Pal S.K., Srirangam P. Journal of Adhesion Science and Technology 38 654-686 (2024)
Cognitive intelligence in industrial robots and manufacturing by Mukherjee A., Divya A.B., Sivvani M., Pal S.K. Computers and Industrial Engineering 191 110106- (2024)
Comparative Analysis of Vibration and Current Signals in the Fault Diagnosis of Induction Motors Using Deep Learning and Machine Learning Techniques by Ayankoso S., Dutta A. , He Y. , Gu F. , Ball A. , Pal S. K. Structural Health Monitoring 14759217241289874- (2024)
A low-cost vision-based weld-line detection and measurement technique for robotic welding by Reddy J., Dutta A., Mukherjee A., Pal S.K. International Journal of Computer Integrated Manufacturing 1-21 (2024)
Controlling shape, size, and surface roughness of aluminum cold plate fabricated via single-step sub-surface friction stir channeling for battery pack cooling by Sarkar P., Pal S. K., Shollock B. , Bhattacharya A. CIRP Journal of Manufacturing Science and Technology 56 18-34 (2024)
Control of the Weld Heterogeneity by Using a Novel Counter Variable Pin Shoulder Rotation Friction Stir Welding: A Simulation and Experimental Study by Mahto R.P., Iqbal M.P., Kumari K., Pal S.K. Journal of Manufacturing Science and Engineering 146 061004- (2024)
Backing plate material selection for optimizing joint performance in friction stir welded aluminium honeycomb by Dutta A., Pal S.K., Panda S.K. Journal of Sandwich Structures and Materials - (2024)
Crushing performance of cost-effective tubular components of AA 5083-O fabricated through friction stir welding process for automotive application by Sen D., Katiyar B.S., Panda S.K., Pal S.K. Archives of Civil and Mechanical Engineering 24 - (2024)
Effect of Carbon fiber reinforcement on an Aluminium Metal Matrix composite joint through upward friction stir processing by Vishwakarma R., Chakladar N. D., Pal S. K. Metals and Materials International - (2024)
Experimental and numerical assessment of thermomechanical and morphological characteristics of pin and pinless micro friction stir welds by Dutta A., Pal S.K., Panda S.K. Materials Today Communications 38 107600- (2024)
Temperature Evolution, IMC Formation, and Resulting Bonding Efficacy in Bimetallic Tubular Components Fabricated by a Novel Friction Stir Backward Extrusion Cladding Method by Swarnkar R., Karmakar S. , Pal S. K. CIRP Journal of Manufacturing Science and Technology 51 91-110 (2024)
Numerical simulation on end expansion of tubes fabricated through friction stir welding and validation of fracture behaviour by Sen D., Katiyar B. S., Panda S. K., Pal S. K. CIRP Journal of Manufacturing Science and Technology 43 227-241 (2023)
A corrosion and tribo-failure analysis of Ni-P-Cu coated mild steel (AISI-1040) at varied copper concentration by Bhattacharyya S., Mohanty D. , Kumar P. , Das S. K., Sahoo P. , Pal S. K., Chakraborty S. Engineering Failure Analysis 146 107063- (2023)
PerBlocks: A Reconfigurable Blockchain for Service Provisioning in Industrial Environment by Tapwal R., Misra S. , Pal S. K. IEEE Transactions on Industrial Informatics 1-8 (2023)
A Critical Review on Applications of Artificial Intelligence in Manufacturing by Mypati O., Mukherjee A. , Mishra D. , Pal S. K., Chakrabarti P. P., Pal A. Artificial Intelligence Review 56 661-768 (2023)
Effect of multi-layer deposition in solid-state friction stir surfacing-based additive manufacturing for fabrication of large-scale metal product by Karmakar S., Swarnkar R. , Pal S. K. Journal of Materials Processing Technology 320 118107- (2023)
The influence of shoulder-workpiece clearance on channel formation during friction stir channeling at low and high heat inputs by Sarkar P., Pal S. K., Bhattacharya A. , Shollock B. Journal of Manufacturing Processes 701-713 (2023)
Shadows: Blockchain Virtualization for Interoperable Computations in IIoT Environments by Tapwal R., Deb P.K., Misra S., Pal S.K. IEEE Transactions on Computers 72 868-879 (2023)
Effect of tool concavity on flash formation during fabrication of tubes through friction stir welding by Sen D., Pal S. K., Panda S. K. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture - (2023)
Characterization and modelling of Al and Cu busbar during charging and discharging of Li-ion battery for electric vehicles by Mypati O., Anwaar T. , Mitra D. , Pal S. K., Srirangam P. Applied Thermal Engineering 218 119239- (2023)
An investigation of bimetallic tube fabrication through a novel friction stir based technology for automotive applications by Swarnkar R., Karmakar S. , Pal S. K. Materials Today Communications 35 106363- (2023)
TEM analysis and molecular dynamics simulation of graphene coated Al-Cu micro joints by Mypati O., Kumar P. P., Pal S. K., Srirangam P. Carbon Trends 9 100223- (2022)
Tensile and fatigue properties of aluminum and copper micro joints for Li-ion battery pack applications by Mypati O., Pal S. K., Srirangam P. Forces in Mechanics 7 100101- (2022)
An investigation of mechanical and electrical properties of friction stir welded Al and Cu busbar for battery pack applications by Mypati O., Sahu S. , Pal S. K., Srirangam P. Materials Chemistry and Physics 287 126373- (2022)
Thermo-mechanical finite element analysis of single-track deposition of Inconel-625 on AISI-1020 substrate by Shrivastava A., Chakraborty S. S., Pal S. K. Materials Today: Proceedings 66 3859-3864 (2022)
The synthesis of novel porous graphene anodes for fast charging and improved electrochemical performance for lithium-ion batteries by Mypati O., Pawar R. M., Sengupta I. , Sharma V. M., Majumder S. B., Pal S. K., Srirangam P. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 44 4349-4363 (2022)
Numerical modelling of friction stir welding of pipes : Effect of tool shoulder on mechanical property and metallurgical characterization by Iqbal M., Jain R. , Pal S. K., Mandal P. Journal of Manufacturing Processes 79 326-339 (2022)
A Critical Survey of EEG-Based BCI Systems for Applications in Industrial Internet of Things by Ajmeria R., Mondal M. , Banerjee R. , Halder T. , Deb P. K., Mishra D. , Nayak P. , Misra S. , Pal S. K., Chakravarty D. IEEE Communications Surveys & Tutorials 25 184-212 (2022)
Fabrication of longitudinal welded tube of aluminium alloy for structural application using friction stir welding process and its characterization by Sen D., Pal S. K., Panda S. K. Archives of Civil and Mechanical Engineering 22 - (2022)
Traces: Inkling Blockchain for Distributed Storage in Constrained IIoT Environments by Tapwal R., Deb P. K., Misra S. , Pal S. K. IEEE Transactions on Industrial Informatics 1-8 (2022)
Real-time deep learning{\textendash}based image processing for pose estimation and object localization in autonomous robot applications by Upadhyay R., Asi A. , Nayak P. , Prasad N. , Mishra D. , Pal S. K. The International Journal of Advanced Manufacturing Technology - (2022)
Effect of Laser Shock Peening on micro-structure and mechanical properties of Friction Stir Welded CuCrZr sheets by Sadhu A., Sarkar S. , Chattopadhyay A. , Mypati O. , Pal S. K., Nath A. K. Materials Science and Engineering: A 831 142238- (2022)
Industry 4.0 Application in Manufacturing for Real-Time Monitoring and Control by Mishra D., Priyadarshi A. , Das S. M., Shree S. , Gupta A. , Pal S. K., Chakravarty D. Journal of Dynamics, Monitoring and Diagnostics 176-187 (2022)
Effect of work material combination and welding speed in dissimilar friction stir welding of aluminium to steel by Datta A., Shrivastava A. , Chakraborty S. S., Pal S. K. Materials Today: Proceedings 66 3729-3737 (2022)
Amaurotic-Entity-Based Consensus Selection in Blockchain-Enabled Industrial IoT by Tapwal R., Deb P. K., Misra S. , Pal S. K. IEEE Internet of Things Journal 9 11648-11655 (2022)
Effect of tool traverse speed on fabrication of open-cell copper foam using friction processing by Sharma V. M., Pal S. K., Racherla V. The International Journal of Advanced Manufacturing Technology 116 2137-2147 (2021)
Mechanism of microstructure evolution and grain growth in friction stir welding of AA6061-T6 and AISI304 in air and water media by Mahto R.P., Rout M., Pal S.K. Materials Chemistry and Physics 273 125081- (2021)
Effect of weld parameters on joint quality in friction stir welding of Mg alloy to DP steel dissimilar materials by Sahu S., Mypati O. , Pal S. K., Shome M. , Srirangam P. CIRP Journal of Manufacturing Science and Technology 35 502-516 (2021)
Sensor based real-time information for monitoring and control of a manufacturing process by Mishra D., Gupta A. , Raj P. , Kumar A. , Anwer S. , Pal S. K., Chakravarty D. , Pal S. Engineering Research Express 3 1-11 (2021)
Microstructural, elemental, mechanical and structural attributes of AA1100/17-4 PH stainless steel composites fabricated via friction stir processing by Marazani T., Akinlabi E. , Madyira D. , Majumdar J. D., Pal S. K. Engineering Solid Mechanics 9 391-414 (2021)
Texture development in 304LN austenitic stainless steel during post-hot-axisymmetric compression by Rout M., Singh S.B., Pal S.K. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 235 1131-1143 (2021)
Weld defect localization in friction stir welding process by Mishra D., Shree S., Gupta A., Priyadarshi A., Das S.M., Pal S.K., Chakravarty D., Pal S., Chattopadhyay T., Pal A. Welding in the World 65 451-461 (2021)
Investigating the effect of graphite pretreatment and contribution of the oxidizer in the synthesis of graphite oxide by hummers approach by Sengupta I., Kumar S.S.S.S., Pal S.K., Chakraborty S. Fullerenes Nanotubes and Carbon Nanostructures - (2021)
Molecular dynamics simulation of atomic diffusion in friction stir spot welded Al to Cu joints by Mypati O., Kumar P. , Iqbal M. , Pal S. K., Srirangam P. Mechanics of Advanced Materials and Structures - (2021)
Fabrication of Copper Foam Using Friction Processing by Sharma V. M., Pal S. K., Racherla V. Manufacturing Letters 29 61-64 (2021)
Real time monitoring and control of friction stir welding process using multiple sensors by Mishra D., Gupta A. , Raj P. , Kumar A. , Anwer S. , Pal S. K., Chakravarty D. , Pal S. , Chakravarty T. , Pal A. , Misra P. , Misra S. CIRP Journal of Manufacturing Science and Technology 30 1-11 (2020)
Multi sensor based strategies for accurate prediction of friction stir welding of polycarbonate sheets by Sahu S.K., Mishra D., Pal K., Pal S.K. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 1-21 (2020)
Performance of additive manufactured Stellite 6 tools in friction stir processing of CuCrZr sheet by Sadhu A., Karmakar D. P., Mypati O. , Muvala G. , Pal S. K., Nath A. K. Optics and Laser Technology 128 106241- (2020)
A study on electrical and electrochemical characteristics of Lithium-ion battery tabs for electric vehicles by Mypati O., Mishra D. , Sahu S. , Pal S. K., Srirangam P. Journal of Electronic Materials 49 72-87 (2020)
A study on the influence of substrate pre-heating on mitigation of cracks in direct metal laser deposition of NiCrSiBC-60%WC ceramic coating on Inconel 718 by Sadhu A., Choudhary A. , Sarkar S. , Nair A. M., Nayak P. , Pawar S. D., Muvala G. , Pal S. K., Nath A. K. Surface and Coatings Technology 389 1-14 (2020)
TransFuse: A Transform Learning Based Multisensor Fusion Framework by Kumar K., Majumdar A., Chandra M.G., Kumar A.A., Mishra D., Pal S.K. IEEE Sensors Letters 4 1-4 (2020)
A new sintering method for fabrication of open-cell metal foam parts by Sharma V. M., Pal S. K., Racherla V. Materials and Manufacturing Processes 35 1717-1726 (2020)
Numerical modelling of microstructure in friction stir welding of aluminium alloys by Iqbal M., Tripathi A. , Jain R. , Mahto R. P., Pal S. K., Mandal P. International Journal of Mechanical Sciences 185 105882- (2020)
Friction stir lap welding of AA6061 aluminium alloy with a graphene interlayer by Sharma A., Sharma V. M., Gugaliya A. , Rai P. , Pal S. K., Paul J. Materials and Manufacturing Processes 35 258-269 (2020)
Friction stir welding of dissimilar materials: an investigation of microstructure and nano-indentation study by Mahto R. P., Pal S. K. Journal of Manufacturing Processes 55 103-118 (2020)
Influence of plunge depth during friction stir welding of aluminum pipes by Iqbal M., Vishwakarma R. K., Pal S. K., Mandal P. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 1-12 (2020)
Characterization of structural transformation of graphene oxide to reduced graphene oxide during thermal annealing by Sengupta I., Kumar S. S., Pal S. K., Chakraborty S. Journal of Materials Research 35 1197-1204 (2020)
Characterizations of weld defects, intermetallic compounds and mechanical properties of friction stir lap welded dissimilar alloys by Mahto R. P., Kumar R. , Pal S. K. Materials Characterization 160 110-115 (2020)
Digital twin: current scenario and a case study on a manufacturing process by Roy R. B., Mishra D. , Pal S. K., Chakravarty T. , Panda S. , Chandra M. G., Pal A. , Misra P. , Chakravarty D. , Misra S. The International Journal of Advanced Manufacturing Technology 107 3691-3714 (2020)
Defect identification in friction stir welding using continuous wavelet transform by Kumari S., Jain R. , Kumar U. , Yadav I. , Kumar N. , Kumari K. , Kesharwani R. , Kumar S. , Pal S. , Pal S. K., Chakravarty D. Journal of Intelligent Manufacturing 30 483-494 (2019)
Application of binary mixed surfactant additives in jet impingement cooling of a hot steel plate by Sarkar I., Jha J. M., Priyanka V. , Pal S. K., Chakraborty S. Heat and Mass Transfer 55 3413-3425 (2019)
Numerical and experimental study on friction stir welding of aluminum alloy pipe by Iqbal M. P., Jain R. , Pal S. K. Journal of Materials Processing Technology 274 1-8 (2019)
Synthesis of open-cell copper foam using friction sintering by Sharma A., Racherla V. , Pal S. K. The International Journal of Advanced Manufacturing Technology 103 3163-3174 (2019)
Weldability of AA6061-T6 and AISI 304 by underwater friction stir welding by Mahto R. P., Gupta C. , Kinjawadekar M. , Meena A. , Pal S. K. Journal of Manufacturing Processes 38 370-386 (2019)
Enhancement of joint strength in friction stir welding AA6061 to AISI 304 by adding diffusive coating agents by Mypati O., Sadhu A. , Sahu S. , Mishra D. , Pal S. K., Singh S. B., Srirangam P. The Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 234 204-217 (2019)
Microstructure and texture evolution in austenitic stainless steel during low strain rate deformation at elevated temperature by Rout M. P., Singh S. B., Pal S. K. International Journal of Material Forming 13 605-621 (2019)
Interfacial microstructural and corrosion characterizations of friction stir welded AA6061-T6 and AISI304 materials by Mahto R. P., Anishetty S. , Sarkar A. , Mypati O. , Pal S. K., Majumdar J. D. Metal and Material International 25 752-767 (2019)
Spray cooling of hot steel plate using aqueous solution of surfactant and polymer by Chakraborty S., Sarkar I. , Roshan A. , Pal S. K., Chakraborty S. Thermal Science and Engineering Progress 10 217-231 (2019)
Bactericidal effect of graphene oxide and reduced graphene oxide: Influence of shape of bacteria by Sengupta I., Bhattacharya P. , Talukdar M. , Neogi S. , Pal S. K., Chakraborty S. Colloid and Interface Science Communications 28 60-68 (2019)
Effect of multiple micro channel reinforcement filling strategy on Al6061-graphene nanocomposite fabricated through friction stir processing by Sharma A., Sharma V. M., Sahoo B. , Pal S. K., Paul J. Journal of Manufacturing Processes 37 53-70 (2019)
Effect of surfactant on thermo-physical properties and spray cooling heat transfer performance of Cu-Zn-Al LDH nanofluid by Chakraborty S., Sengupta I. , Sarkar I. , Pal S. K., Chakraborty S. Applied Clay Science 168 43-55 (2019)
Investigation on effect of pin shapes on temperature, material flow and forces during friction stir welding: a simulation study by Jain R., Pal S. K., Singh S. B. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 1-14 (2018)
Comparative study on different additives with a jet array on cooling of a hot steel surface by Sarkar I., Chakraborty S. , Ashok A. , Sengupta I. , Pal S. K., Chakraborty S. Applied Thermal Engineering 137 154-163 (2018)
A review on sensor based monitoring and control of friction stir welding process and a roadmap to Industry 4.0 by Mishra D., Basu Roy R. , Dutta S. , Pal S. K., Chakravarty D. Journal of Manufacturing Processes 36 373-397 (2018)
Synthesis of Cu-Al LDH nanofluid and its application in spray cooling heat transfer of a hot steel plate by Chakraborty S., Sarkar I. , Ashok A. , Sengupta I. , Pal S. K., Chakraborty S. Powder Technology 335 285-300 (2018)
Multi-objective optimization of pulsed gas metal arc welding process using neuro NSGA-II by Pal K., Pal S. K. Journal of The Institution of Engineers (India): Series C 1-10 (2018)
Weld defect identification in friction stir welding through optimized wavelet transformation of signals and validation through X-ray micro-CT scan by Basu Roy R., Ghosh A. , Bhattacharyya S. , Mahto R. P., Kumari K. , Pal S. K., Pal S. The International Journal of Advanced Manufacturing Technology 99 623-633 (2018)
Prediction of edge profile of plate during hot cross rolling by Rout M., Pal S. K., Singh S. B. Journal of Manufacturing Processes 31 301-309 (2018)
EBSD study of microstructure evolution during axisymmetric hot compression of 304LN stainless steel by Rout M., Ranjan R. , Pal S. K., Singh S. B. Materials Science & Engineering A 711 378-388 (2018)
Counter rotating twin-tool system in friction stir welding process: A simulation study by Jain R., Kumari K. , Pal S. K., Singh S. B. Journal of Materials Processing Technology 255 121-128 (2018)
Thermal reduction of graphene oxide: how temperature influences purity by Sengupta I., Chakraborty S. , Talukdar M. , Pal S. K., Chakraborty S. Journal of Materials Research 33 4113-4122 (2018)
Thermo-physical properties of Cu-Zn-Al LDH nanofluid and its application in spray cooling by Chakraborty S., Sarkar I. , Ashok A. , Sengupta I. , Pal S. K., Chakraborty S. Applied Thermal Engineering 141 339-351 (2018)
Deformation behavior and evolution of microstructure and texture during hot compression of AISI 304LN stainless steel by Rout M., Biswas S. , Ranjan R. , Pal S. K., Singh S. B. Metallurgical and Materials Transactions A 49 864-880 (2018)
Finite element simulation of pin shape influence on material flow and forces in friction stir welding by Jain R., Pal S. K., Singh S. B. International Journal of Advanced Manufacturing Technology 94 1781-1797 (2018)
Modeling of defects in friction stir welding using coupled Eulerian and Lagrangian method by Chauhan P., Jain R. , Pal S. K., Singh S. B. Journal of Manufacturing Processes 34 158-166 (2018)
A comprehensive study on force, temperature, mechanical properties and micro-structural characterizations in friction stir lap welding of dissimilar materials (AA6061-T6 & AISI304) by Mahto R. P., Kumar R. , Pal S. K., Panda S. K. Journal of Manufacturing Processes 31 624-639 (2018)
Friction sintering of brass powder by Sharma V. M., Racherla V. , Pal S. K. Advances in Materials and Processing Technologies 5 95-103 (2018)
Friction stir processing of Al6061-SiC-graphite hybrid surface composites by Sharma A., Sharma . M., Mewar S. , Pal S. K., Paul J. Materials and Manufacturing Processes 33 795-804 (2018)
Friction stir welding of polypropylene sheets by Sahu S., Mishra D. , Mahto R. P., Sharma V. M., Pal S. K., Pal K. , Banerjee S. , Dash P. Engineering Science and Technology, an International Journal 21 245-254 (2018)
Surface modification of Al6061 by graphene impregnation through a powder metallurgy assisted friction surfacing by Sharma A., Sagar S. , Mahto R. P., Sahoo B. , Pal S. K., Paul J. Surface and Coatings Technology 337 12-23 (2018)
Application of TiO2 nanofluid-based coolant for jet impingement quenching of a hot steel plate by Sarkar I., Chakraborty S. , Roshan A. , Behera D. K., Pal S. K., Chakraborty S. Experimental Heat Transfer 01-16 (2018)
Ultrafast cooling of a hot steel plate using Cu-Al layered double hydroxide nanofluid jet by Sarkar I., Chrakraborty S. , Jha J. M., Pal S. K., Chakraborty S. International Journal of Thermal Sciences 116 52-62 (2017)
Volumetric defect analysis in friction stir welding based on three dimensional reconstructed images by Parikh C., Ranjan R. , Khan A. R., Jain R. , Mahto R. P., Chakravarty D. , Pal S. , Pal S. K. Journal of Manufacturing Processes 29 96-112 (2017)
Heat transfer enhancement using surfactant based alumina nanofluid jet from a hot steel plate by Tiara A. M., Chakraborty S. , Sarkar I. , Ashok A. , Pal S. K., Chakraborty S. Experimental Thermal and Fluid Science 89 295-303 (2017)
Heat transfer from a hot moving steel plate by using Cu-Al layered double hydroxide nanofluid based air atomized spray by Jha J. M., Sarkar I. , Chakraborty S. , Pal S. K., Chakraborty S. Experimental Heat Transfer 30 500-516 (2017)
Synthesis and characterization of Zn-Al layered double hydroxide nanofluid and its application as a coolant in metal quenching by Tiara A. M., Chakraborty S. , Sarkar I. , Pal S. K., Chakraborty S. Applied Clay Science 143 241-249 (2017)
Experimental investigation on the effect of dispersant addition on thermal and rheological characteristics of TiO2 nanofluid by Chakraborty S., Sarkar I. , Behera D. K., Pal S. K., Chakraborty S. Powder Technology 307 10-24 (2017)
Improvement in limiting drawing ratio of aluminum tailored friction stir welded blanks using modified conical tractrix die by Kesharwani R., Basak S. , Panda S. K., Pal S. K. Journal of Manufacturing Processes 28 137-155 (2017)
Effect of alumina nanofluid jet on the enhancement of heat transfer from a steel plate by Tiara A. M., Chakraborty S. , Sarkar I. , Pal S. K., Chakraborty S. Heat and Mass Transfer 53 2187-2197 (2017)
Finite element analysis of cross rolling on AISI 304 stainless steel: prediction of stress and strain fields by Rout M., Pal S. K., Singh S. B. Journal of the Institution of Engineers (India): Series C 98 27-35 (2017)
Finite element simulation of temperature and strain distribution during friction stir welding of AA2024 aluminum alloy by Jain R., Pal S. K., Singh S. B. Journal of The Institution of Engineers (India): Series C 98 37-43 (2017)
Hybrid fuzzy-grey-Taguchi based multi weld quality optimization of Al/Cu dissimilar friction stir welded joints by Sahu P., Kumari K. , Pal S. , Pal S. K. Advances in Manufacturing 4 237-247 (2016)
Tool condition classification in turning process using hidden markov model based on texture analysis of machined surface images by Bhat N. N., Dutta S. , Pal S. K., Pal S. Measurement 90 500-509 (2016)
Tool condition monitoring by SVM classification of machined surface images in turning by Bhat N. N., Dutta S. , Vashisth T. , Pal S. , Pal S. K., Sen R. The International Journal of Advanced Manufacturing Technology 83 1487-1502 (2016)
A study on mechanical properties in friction stir lap welding of AA 6061-T6 and AISI 304 by Mahto R. P., Bhoje R. , Pal S. K., Joshi H. S., Das S. Material Science and Engineering: A 652 136-144 (2016)
A study on the variation of forces and temperature in a friction stir welding process: a finite element approach by Jain R., Pal S. K., Singh S. B. Journal of Manufacturing Processes 23 278-286 (2016)
Influence of plate position, tool offset and tool rotational speed on mechanical properties and microstructure of dissimilar Al/Cu friction stir welding joints by Sahu P. K., Pal S. , Pal S. K., Jain R. Journal of Material Processing and Technology 235 55-67 (2016)
Progressive tool condition monitoring of end milling from machined surface images by Dutta S., Pal S. K., Sen R. Proceedings of IMechE, Journal of Engg Manufacture 232 251-266 (2016)
Progressive tool flank wear monitoring by applying discrete wavelet transform on turned surface images by Dutta S., Pal S. K., Sen R. Measurement 77 388-401 (2016)
Jet impingement cooling of a hot moving steel plate: An experimental study by Jha J. M., V R. S., Sarkar I. , Pal S. K., Chakraborty S. Experimental Heat Transfer 29 615-631 (2016)
Finite element simulation of a cross rolling process by Rout M. P., Pal S. K., Singh S. B. Journal of Manufacturing Processes 24 283-292 (2016)
On-machine tool prediction of flank wear from machined surface images using texture analyses and support vector regression by Dutta S., Pal S. K., Sen R. Precision Engineering 43 34-42 (2016)
Classification and Identification of surface defects in friction stir welding : an image processing approach by Ranjan R., Khan A. R., Parikh C. , Jain R. , Mahto R. P., Pal S. , Pal S. K., Chakravarty D. Journal of Manufacturing Processes 22 237-253 (2016)
Effect of polymer additive on the cooling rate of a hot steel plate by using water jet by Sarkar I., Behera D. K., Jha J. M., Pal S. K., Chakraborty S. Experimental Thermal and Fluid Science 70 105-114 (2016)
Heat transfer from a hot moving steel plate by air-atomized spray impingement by Jha J. M., Ravikumar S. V., Haldar K. , Sarkar I. , Pal S. K., Chakraborty S. Experimental Heat Transfer 29 78-96 (2016)
Heat transfer in jet impingement on a hot steel surface using surfactant based Cu Al layered double hydroxide nanofluid by Tiara A. M., Chakraborty S. , Sarkar I. , Pal S. K., Chakraborty S. International Journal of Heat and Mass Transfer 101 825-833 (2016)
Effect of oxide layer in the ultra fast cooling of a steel plate by Mohapatra S. S., Singh A. , Bhattacharya C. , V R. S., Chakraborty S. , Pal S. K. Experimental Heat Transfer 28 156-173 (2015)
Tool condition monitoring in turning by applying machine vision by Dutta S., Pal S. K., Sen R. Journal of Manufacturing Science and Engineering 138 051008-051008- (2015)
Ultrafast cooling of a hot moving steel plate by using alumina nanofluid based air atomized spray impingement by Jha J. M., Ravikumar S. ., Tiara A. M., Sarkar . , Pal S. K., Chakraborty S. Applied Thermal Engineering 75 738-747 (2015)
Ultrafast cooling processes with surfactant additives for hot moving steel plate by Jha J. M., Ravikumar S. V., Sarkar I. , Pal S. K., Chakraborty S. Experimental Thermal and Fluid Science 68 135-144 (2015)
Sensor based prediction of weld microstructure in pulsed MIG welding by Pal K., Pal S. K. International Journal of Microstructure and Materials Properties 10 - (2015)
Defect identification in friction stir welding using discrete wavelet analysis by Kumar U., Yadav I. , Kumari . , Kumari K. , Ranjan . , Kesharwani R. K., Jain . , Kumar S. , Pal S. , Chakravarty D. , Pal S. K. Advances in Engineering Software 85 43-50 (2015)
Experimental investigations on formability of aluminum tailor friction stir welded blanks in deep drawing process by Kesharwani R. K., Panda S. K., Pal S. K. Journal of Materials Engineering and Performance 24 1038-1049 (2015)
Friction stir weld classification by applying wavelet analysis and support vector machine on weld surface images by Bhat N. N., Kumari K. , Dutta S. , Pal S. K., Pal S. Journal of Manufacturing Processes 20 274-281 (2015)
Friction stir welding by using counter-rotating twin tool by Kumari K., Pal S. K., Singh S. B. Journal of Materials Processing Technology 215 132-141 (2015)
Surfactant-based Cu water nanofluid spray for heat transfer enhancement of high temperature steel surface by Ravikumar S. V., Jha J. ., Haldar K. , Pal S. K., Chakraborty S. Journal of Heat Transfer 137 051504-051504 (2015)
Synthesis of Cu Al layered double hydroxide nanofluid and characterization of its thermal properties by Chakraborty S., Sarkar I. , Haldar . , Pal S. K., Chakraborty S. Applied Clay Science 107 98-108 (2015)
Heat transfer enhancement using air-atomized spray cooling with water Al2O3 nanofluid by Ravikumar S. V., Haldar K. , Jha J. M., Chakraborty S. , Sarkar I. , Pal S. K., Chakraborty S. International Journal of Thermal Sciences 96 85-93 (2015)
Multi objective optimization of friction stir welding parameters for joining of two dissimilar thin aluminum sheets by Kesharwani R. K., Panda S. K., Pal S. K. Procedia Materials Science 6 178-187 (2015)
Particle swarm optimization of a neural network model in a machining process by Garg S., Patra K. , Pal S. K. Sadhana 39 533-548 (2014)
Enhancement of cooling rate for a hot steel plate using air-atomized spray with surfactant-added water by Mohapatra S. S., Jha J. M., Srikanth K. , Pal S. K., Chakraborty S. Experimental Heat Transfer 27 72-90 (2014)
Enhancement of heat transfer rate in air-atomized spray cooling of a hot steel plate by using an aqueous solution of non-ionic surfactant and ethanol by Ravikumar S. V., Jha J. M., Sarkar I. , Pal S. K., Chakraborty S. Applied Thermal Engineering 64 64-75 (2014)
Ultra-fast cooling and its effect on the mechanical properties of steel by Mohapatra S. S., Ravikumar S. V., Ranjan R. , Pal S. K., Singh S. B., Chakraborty S. Journal of Heat Transfer 136 0321011-0321019 (2014)
Ultra fast cooling of hot steel plate by air atomized spray with salt solution by Mohapatra S. S., Ravikumar S. V., Jha J. M., Singh A. K., Bhattacharya C. , Pal S. K., Chakraborty S. Heat and Mass Transfer 50 587-601 (2014)
Ultrafast cooling of medium carbon steel strip by air atomized water sprays with dissolved additives by Ravikumar S. V., Jha J. M., Sarkar I. , Tiara A. M., Pal S. K., Chakraborty S. Ironmaking & Steelmaking 41 529-538 (2014)
Experimental investigation of air-atomized spray with aqueous polymer additive for high heat flux applications by Ravikumar S. V., Jha J. M., Tiara A. M., Pal S. K., Chakraborty S. International Journal of Heat and Mass Transfer 72 362-377 (2014)
Experimental investigation of effect of different types of surfactants and jet height on cooling of a hot steel plate by Ravikumar S. V., Jha J. M., Mohapatra S. S., Pal S. K., Chakraborty S. Journal of Heat Transfer 136 072102-072102-10 (2014)
Mixed-surfactant additives for enhancement of air-atomized spray cooling of a hot steel plate by Ravikumar S. V., Jha J. M., Sarkar I. , Pal S. K., Chakraborty S. Experimental Thermal and Fluid Science 55 210-220 (2014)
Strategies for intelligent drill wear prediction using multiple sensor signals by Patra K., Pal S. K., Bhattacharyya K. International Journal of Mechatronics and Manufacturing Systems 6 493-512 (2013)
Application of digital image processing in tool condition monitoring: a review by Dutta S., Pal S. K., Mukhopadhyay S. , Sen R. CIRP Journal of Manufacturing Science and Technology 6 212-232 (2013)
Influence of ultrafast cooling on microstructure and mechanical properties of steel by Ravikumar S. V., Jha J. M., Mohapatra S. ., Pal S. K., Chakraborty S. steel research international 84 1157-1170 (2013)
Progressive cutting tool wear detection from machined surface images using voronoi tessellation method by Datta A., Dutta S. , Pal S. K., Sen R. Journal of Materials Processing Technology 213 2339-2349 (2013)
Ultra fast cooling of a hot steel plate by using high mass flux air atomized spray by Mohapatra S. S., Ravikumar S. V., Pal S. K., Chakraborty S. Steel Research International 84 229-236 (2013)
Experimental investigation of effect of a surfactant to increase cooling of hot steel plates by a water jet by Mohapatra S. S., Ravikumar S. V., Verma A. , Pal S. K., Chakraborty S. Journal of Heat Transfer 135 032101-032101 (2013)
Experimental study of the effect of spray inclination on ultrafast cooling of a hot steel plate by Ravikumar S. V., Jha J. M., Mohapatra S. S., Sinha A. , Pal S. K., Chakraborty S. Heat and Mass Transfer 49 1509-1522 (2013)
Correlation study of tool flank wear with machined surface texture in end milling by Dutta S., Kanwat A. , Pal S. K., Sen R. Measurement 46 4249-4260 (2013)
Achievement of ultrafast cooling rate in a hot steel plate by air-atomized spray with different surfactant additives by Ravikumar S. V., Jha J. M., Sarkar I. , Mohapatra S. S., Pal S. K., Chakraborty S. Experimental Thermal and Fluid Science 50 79-89 (2013)
Multi-objective optimization in wire-electro-discharge machining of TiC reinforced composite through Neuro-Genetic technique by Saha P., Tarafdar D. , Pal S. K., Saha P. , Srivastava A. K., Das K. Applied Soft Computing 13 2065-2074 (2013)
Experimental studies on different cooling processes to achieve ultra-fast cooling rate for hot steel plate by Mohapatra S. S., Chakraborty S. , Pal S. K. Experimental Heat Transfer 25 111-126 (2012)
Experimental study and optimization of air atomized spray with surfactant added water to produce high cooling rate by Mohapatra S. S., Ravikumar S. V., Andhare S. , Chakraborty S. , Pal S. K. Journal of Enhanced Heat Transfer 19 397-408 (2012)
Multi-sensor based prediction of metal deposition in pulsed gas metal arc welding using various soft computing models by Bhattacharya S., Pal K. , Pal S. K. Applied Soft Computing 12 498-505 (2012)
Texture analysis of turned surface images using grey level co-occurrence technique by Dutta A., Dutta S. , Mukherjee S. , Sen R. , Pal S. K. Advance Materials Research 365 38-43 (2012)
Adaptive chirplet transform for sensitive and accurate monitoring of pulsed gas metal arc welding process by Chatterjee S., Chatterjee R. , Pal S. , Pal K. , Pal S. K. The International Journal of Advanced Manufacturing Technology 60 111-125 (2012)
Detection of tool condition from the turned surface images using an accurate grey level co-occurrence technique by Dutta S., Dutta A. , Daschakladar N. , Pal S. K., Mukhopadhyay S. , Sen R. Precision Engineering 36 458-466 (2012)
Drilling of woven glass fiber reinforced plastic an experimental and finite element study by Chakladar N. D., Pal S. K., Mandal P. International Journal of Advanced Manufacturing Technology 58 267-278 (2012)
A finite element study of chip formation process in orthogonal machining by Priyadarshini A., Pal S. K., Samantaray A. K. International Journal of Manufacturing, Materials and Mechanical Engineering 1(4) 19-45 (2011)
Effect of pulse parameters on weld quality in pulsed gas metal arc welding: a review by Pal K., Pal S. K. Journal of Materials Engineering and Performance 20 918-931 (2011)
Monitoring of weld penetration using arc acoustics by Pal K., Pal S. K. Materials and Manufacturing Processes 26 684-693 (2011)
Tool wear monitoring and selection of optimum cutting conditions with progressive tool wear effect and input uncertainties by Pal S., Heyns P. S., Freyer B. H., Theron N. J., Pal S. K. Journal of Intelligent Manufacturing 22 - (2011)
Optimization of weld deposition in pulsed MIG welding using hybrid neuro based techniques by Pal K., Bhattacharya S. , Pal S. K. International Journal of Computer Integrated Manufacturing 24 198-210 (2011)
Influence of the johnson-cook material model parameters and friction models on simulation of orthogonal cutting by Priyadarshini A., Pal S. K., Samantaray A. K. International Journal of Machining and Forming Technologies 4 (1-2) 59-83 (2011)
Soft computing methods used for the modeling and optimization of gas metal arc welding: a review by Pal K., Pal S. K. International Journal of Manufacturing Research 6 15-29 (2011)
Fuzzy radial basis function (FRBF) network based tool condition monitoring using vibration signals by Patra K., Pal S. K., Bhattacharyya K. Machining Science and Technology 14 280-300 (2010)
Genetically evolved radial basis function network based prediction of drill flank wear by Garg S., Patra K. , Khetrapal V. , Pal S. K., Chakravarty D. Engineering Applications of Artificial Intelligence 23 1112-1120 (2010)
Prediction of the quality of pulsed metal inert gas welding using statistical parameters of arc signals in artificial neural network by Pal S., Pal S. K., Samantaray A. K. International Journal of Computer Integrated Manufacturing 23 453-465 (2010)
Sensor based characterization of weld quality and process stability monitoring in pulsed MIG welding by Pal K., Pal S. K. International Journal of Mechatronics and Intelligent Manufacturing 2 5-16 (2010)
Investigation on arc sound and metal transfer modes for on-line monitoring in pulsed gas metal arc welding by Pal K., Bhattacharya S. , Pal S. K. Journal of Materials Processing Technology 210 1397-1410 (2010)
Determination of optimal pulse metal inert gas welding parameters with a Neuro-GA technique by Pal S., Pal S. K., Samantaray A. K. Materials and Manufacturing Processes 25 606-615 (2010)
Study of weld joint strength using sensor signals for various torch angles in pulsed MIG welding by Pal K., Pal S. K. CIRP Journal of Manufacturing Science and Technology 3 55-65 (2010)
Modelling of the flame temperature of solution combustion synthesis of nanocrystalline calcium hydroxyapatite material and its parametric optimization by Ghosh S. K., Pal S. , Roy S. K., Pal S. K., Basu D. Bulletin of Materials Science 33 339-350 (2010)
Multisensor based monitoring of weld deposition and plate distortion for various torch angles in pulsd MIG welding using arc acoustics by Pal K., Bhattacharya S. , Pal S. K. The International Journal of Advanced Manufacturing Technology 50 543-556 (2010)
Finite element study of serrated chip formation and temperature distribution in orthogonal machining by Priyadarshini A., Pal S. K., Samantaray A. K. International Journal of Mechatronics and Intelligent Manufacturing 2 53-72 (2010)
Prediction of metal deposition from arc sound and weld temperature signatures in pulsed MIG welding by Pal K., Bhattacharya S. , Pal S. K. International Journal of Advanced Manufacturing Technology 45 1113-1130 (2009)
A neuro ant colony optimized model for drill flank wear prediction by Ragavendra N., Koranne R. , Patra K. , Pal S. K. International Journal for Manufacturing Science and Production 10(3-4) 169-184 (2009)
Application of wavelet packet transform based normalized radial basis function network in a machining process by Patra K., Pal S. K., Bhattacharyya K. International Journal of Materials and Product Technology 35 184-198 (2009)
Joint strength prediction in a pulsed MIG welding process using hybrid optimized model by Raghavendra N., Koranne R. , Pal S. , Pal S. K., Samantaray A. K. International Journal of Advanced Manufacturing Technology 41 694-705 (2009)
Modeling of wire-electro-discharge machining of TiC/Fe in-situ metal matrix composite using normalized RBFN with enhanced k-means clustering technique by Saha P., Tarafdar D. , Pal S. K., Saha P. , Srivastava A. K., Das K. The International Journal of Advanced Manufacturing Technology 43 107-116 (2009)
Neural network based prediction of drill wear from theoretically analyzed and experimentally measured values of thrust force and torque by Patra K., Bhattacharyya K. , Pal S. K. International Journal of Machining and Machinability of Materials 5 207-231 (2009)
Optimization of quality characteristics parameters in a pulsed metal inert gas welding process using grey-based Taguchi method by Pal S., Malviya S. K., Pal S. K., Samantaray A. K. International Journal of Advanced Manufacturing Technology 44 1250-1260 (2009)
Modeling of electrical discharge machining process using backpropagation neural network and multi-objective optimization using non-dominating sorting genetic algorithm-II by Mandal D., Pal S. K., Saha P. Journal of Materials Processing Technology 186 154-162 (2008)
Drill wear prediction using different neural network architectures by Panda S. S., Chakraborty D. , Pal S. K. International Journal of Knowledge-Based and Intelligent Engineering Systems 12 327-338 (2008)
Effect of different basis functions on a radial basis function network in prediction of drill flank wear from motor current signals by Garg S., Pal S. K., Chakraborty D. Soft Computing : A Fusion of Foundations, Methodologies and Applications 12 777-787 (2008)
Pseudo-bond graph modelling of temperature distribution in a through-process hot Steel rolling by Manishankar M., Pal S. K. Mathematics and Computers in Simulation 77 81-95 (2008)
Sensor based weld bead geometry prediction in pulsed metal inert gas welding process through artificial neural networks by Pal S., Pal S. K., Samantaray A. K. International Journal of Knowledge-Based and Intelligent Engineering Systems 12 101-114 (2008)
Flank wear prediction in drilling using backpropagation neural network and radial basis function network by Panda S. S., Chakraborty D. , Pal S. K. Applied Soft Computing 8 858-871 (2008)
Soft computing models based prediction of cutting speed and surface roughness in wire electro-discharge machining of tungsten carbide cobalt composite by Saha P., Singha A. , Pal S. K., Saha P. International Journal of Advanced Manufacturing Technology 39 74-84 (2008)
Application of wavelet packet analysis in drill wear monitoring by Patra K., Pal S. K., Bhattacharyya K. Machining Science and Technology 11 413-432 (2007)
Artificial neural network based prediction of drill flank wear from motor current signals by Patra K., Pal S. K., Bhattacharyya K. Applied Soft Computing Journal 7 929-935 (2007)
Monitoring of drill flank wear using fuzzy backpropagation neural network by Panda S. S., Chakraborty D. , Pal S. K. International Journal of Advanced Manufacturing Technology 34 227-235 (2007)
Backpropagation neural network based modeling of multi-responses of an electrical discharge machining process by Mandal D., Pal S. K., Saha P. International Journal of Knowledge-Based and Intelligent Engineering Systems 11 105-113 (2007)
Bond graph and finite element analysis of temperature distribution in hot rolling processes : a comparative study by Pal S. K., Jesus S. T., Linkens A. D., Howard I. C. Journal of Systems and Control Engineering (Proceedings of the I MECH E, Part I ) 221 653-661 (2007)
Bond graph modelling of temperature distribution in a steel plate during multi-stand rolling by Mandal M., Pal S. K. International Journal of Materials and Product Technology 30 370-385 (2007)
Radial basis function neural network model based prediction of weld-plate distortion due to pulsed metal inert gas welding by Pal S., Pal S. K., Samantaray A. K. Science and Technology of Welding and Joining 12 725-731 (2007)
Evaluation of the performance of backpropagation and radial basis function neural networks in predicting the drill flank wear by Garg S., Pal S. K., Chakraborty D. Neural Computing and Applications 16 407-417 (2007)
Predicting drill wear using artificial neural network by Singh A. K., Panda S. S., Pal S. K., Chakraborty D. International Journal of Advanced Manufacturing Technology 28 456-462 (2006)
Drill wear monitoring using backpropagation neural network by Panda S. S., Singh A. K., Chakraborty D. , Pal S. K. Journal of Materials Processing Technology 172 283-290 (2006)
Artificial neural network based prediction of flank wear in turning by Bisht H., Gupta J. , Pal S. K., Chakraborty D. International Journal of Materials and Product Technology 22 328-338 (2005)
Bond graph modelling and simulation of static recrystallization kinetics in multipass hot steel rolling by Pal S. K., Linkens A. D. Computer, Materials and Continua 2 113-118 (2005)
Surface roughness prediction in turning using artificial neural network by Pal S. K., Chakraborty D. Neural Computing and Applications 14 319-324 (2005)
Modelling of thermometallurgical process in a runout table : a bond graph approach by Pal S. K., Mukherjee A. , Karmakar R. International Journal of Modelling and Simulation 22 39-46 (2002)
Modelling of thermometallurgical process in a runout table simulation studies of eutectoid and 1025 carbon steel by Pal S. K., Mukherjee A. , Karmakar R. International Journal of Modelling and Simulation 22 77-85 (2002)
Temperature distribution in steel during hot rolling: pseudo-bond graph view by Pal S. K., Linkens D. A. Simulation Modelling Practice and Theory 10 69-85 (2002)

Conferences

A Solid-State Additive Manufacturing Approach for the Fabrication of SiC-Reinforced Metal Matrix Composite in Automotive Components of Light Metal by Karmakar S., Pal S.K. Minerals, Metals and Materials Series 201-212 (2025)
Lightweight Bimetallic Tubular Components via Friction Stir Backward Extrusion: Fabrication and Process Outcome Analysis by Swarnkar R., Pal S.K. Minerals, Metals and Materials Series 95-105 (2025)
Reclaiming Control: Blockchain-Powered Social Network Data Management for Global Connectivity by Tapwal R., Misra S. , Pal S. K. IEEE ICC 2024 - (2024)
Condition monitoring of industrial exhaust motor-fan assembly using statistical feature optimization with nature-inspired optimizers by Das A., Agrawal A., Kundoliya N., Dutta A., Pal S.K., Kumar R. 2024 IEEE 3rd International Conference on Control, Instrumentation, Energy and Communication, CIEC 2024 - Proceedings 97-102 (2024)
An Effective EEG-Based Image Classification Methodology Under Low Data and Resource Requirements Using Machine Learning by Banerjee A., Pal O., Mondal M., Mukherjee A., Chakrabarti P.P., Pal S.K., Misra S., Chakravarty D. ICCECE 2024 - International Conference on Computer, Electrical and Communication Engineering 1-8 (2024)
Data fusion cognitive computing for characterization of mechanical property in friction stir welding process by Hoang D., Chen R. , Mishra D. , Pal S. K., Farhad I. International Design Engineering Technical Conferences & Computers and Information in Engineering Conference 117184- (2023)
An integrated system using real-time sensor data and cloud technology for vibration analysis in industrial machine health monitoring by Agarwal A., Das A. , Mondal K. , Dutta A. , Pal S. K., Kumar R. , Appukuttan A. , Mallarapu S. XVIII Vibration Engineering & Technology of Machinery Conference (VETOMAC) - (2023)
Optimisation of process parameters to fabricate tubular components of AA5083-O alloy using friction stir welding for crashworthiness applications by Sen D., Pal S. K., Panda S. K. 9th International & 30th All India Manufacturing Technology, Design and Research Conference - (2023)
EEG-based Color Classification for Industry 4.0 Applications by Mondal M., Pal O. , Halder T. , Mukherjee A. , Nayak P. , Pal S. K., Chakravarty D. , Misra S. 9th International & 30th All India Manufacturing Technology, Design and Research Conference - (2023)
CartelChain: A Secure Communication Mechanism for Heterogeneous Blockchains by Tapwal R., Misra S. , Pal S. K. ICC 2022 - IEEE International Conference on Communications - (2022)
A nano-indentation study on intermetallic compound in friction stir welding of AA6061-T6 and AISI304 by Mahto R. P., Pal S. K. 40th International MATADOR Conference on Advanced Manufacturing - (2019)
Fabrication of copper foam plate using friction sintering by Sharma V. M., Racherla V. , Pal S. K. ASME 2019 14th International Manufacturing Science and Engineering Conference - (2019)
Fabrication of large copper foam plates using friction sintering: Effect of tool traverse speed by Sharma V. M., Racherla V. , Pal S. K. 40th International MATADOR Conference on Advanced Manufacturing - (2019)
Friction stir welding of aluminum pipes: a study on the variation of force, torque, power, and temperature by Iqbal M. P., Vishwakarma R. K., Pal S. K., Mandal P. 40th International MATADOR Conference on Advanced Manufacturing - (2019)
A review and case study on mechanical properties and microstructure evolution in magnesium steel friction stir welding by Sahu S., Thorat O. , Mahto R. P., Pal S. K., Srirangam P. Magnesium Technology 2019, TMS 2019 148th Annual Meeting & Exhibition 101-109 (2019)
A study on electrical conductivity of micro friction stir welded dissimilar sheets for hybrid electric vehicles (HEVs) by Mypati O., Pal S. K., Srirangam P. TMS 2019 148th Annual Meeting & Exhibition - (2019)
Effect of tool geometry on weld strength and hardness in friction stir lap welding of dissimilar materials by Sahu S., Mypati O. , Pal S. K., Singh S. B. 7th Asia Steel International Conference 148- (2018)
An experimental and numerical study of friction stir pipe welding of AA6061-T6 aluminum alloys by Iqbal M., Jain R. , Pal S. K., Mandal P. 56th National Metallurgists` Day and 72nd Annual Technical Meeting (NMD-ATM), Kolkata - (2018)
Industry 4.0 in friction stir welding by Pal S. K. National Conference on Advanced Functional Materials Processing and Manufacturing (NCAMMM) - (2018)
Study on static recrystallisation behaviour of 304ln stainless steel by two-stage compression test by Rout M., Singh S. B., Pal S. K. th Asia Steel International Conference, Bhubaneswar, Odisha. - (2018)
Concept of Industry 4.0 in friction stir welding by Mishra D., Roy R. B., Dutta S. , Pal S. K., Chakravarty D. Industry 4.0 Summit - (2018)
Formation of Kamacite (Fe, Ni) to increase the mechanical strength of friction stir lap welding of aluminium to steel aided with coating by Mypati O., Sadhu . , Sahu S. , Mishra D. , Pal S. K. 7th Asia Steel International Conference - (2018)
Friction sintering of copper powder using a new rapid, cost effective and energy efficient process by Sharma V. M., Maity D. , Racherla V. , Pal S. K. ASME 2018 13th International Manufacturing Science and Engineering Conference 1-8 (2018)
Friction stir lap welding of AA6061-T6 and AISI304: mechanical and metallurgical properties of stir zone by Mahto R. P., Gaikwad J. , Kumar . , Pal S. K. 7th Asia Steel International Conference 149- (2018)
Friction stir lap welding of thin AA6061-T6 and AISI304 sheets at different values of pin penetrations by Mahto R. P., Pal S. K. ASME 2018 13th International Manufacturing Science and Engineering Conference 1-6 (2018)
Friction stir welding for joining of dissimilar materials by Sahu S., Mypati O. , Nayak S. S., Sarkar P. , Pal S. K., Singh S. B. AIMTDR 2018 699-709 (2018)
Modified synthesis and reduction of graphene oxide by thermal treatment by Sengupta I., Talukdar M. , Pal S. K., Chakraborty S. 2018 MRS Spring Meeting & Exhibit - (2018)
Characterization of post-hot-deformation annealing twins developed in 304LN austenitic stainless steel by Rout M., Singh S. B., Pal S. K. 7th Asia Steel International Conference 112- (2018)
Characterization of thermophysical properties of graphene oxide and reduced graphene oxide nanofluids by Talukdar M., Sengupta I. , Pal S. K., Chakraborty S. 2018 MRS Spring Meeting & Exhibit - (2018)
Effect of pin diameter in underwater friction stir lap welding of dissimilar materials: AA6061-T6 & AISI 304 by Mahto R. P., Kinjawadekar M. , Gupta C. , Pal S. K. 7th International and 28th All India Manufacturing Technology, Design and Research Conference - (2018)
Effect of process parameters on the evolution of residual stress in friction stir welding with counter-rotating twin tool by Kumari K., Mishra D. , Pal S. K. International Conference on Advanced Materials and Processing Technologies (AMPT-2017) - (2017)
Experimental investigation to join Al 6063 alloy to polypropylene using friction stir welding by Sahoo S. K., Panda M. , Mahto R. P., Pal S. K., Pal K. , Das P. Proceedings of the 10th International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 10) 727-731 (2017)
Finite element modeling of friction stir pipe welding by Iqbal M., Jain R. , Pal S. K. National conference on Advanced Functional Materials Processing And Manufacturing, CMERI Durgapur - (2017)
Synthesis of titanium dioxide nanofluid and application in jet impingement cooling in steel industries by Sarkar I., Pal S. K., Chakraborty S. ACS 254th National Meeting and Exposition - (2017)
Friction stir welding of HDPE sheets- a study on the effect of rotational speed by Sahu S. K., Mishra D. , Mahto R. P., Pal S. K., Pal K. Proceedings of the 6th International and 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR) 1065-1068 (2016)
Comparative study on effect of counter rotating twin tool and single tool on temperature rise during friction stir welding by Kumari K., Mahto R. P., Pal S. K., Singh S. B. Proceedings of the 6th International and 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR 679-682 (2016)
Heat transfer enhancement from a hot steel plate using Triton X-100 surfactant additive in water jet by Sarkar I., Pal S. K., Chakraborty S. 2016 AIChE Annual Meeting - (2016)
A coupled thermo-mechanical model to predict forces, temperature and material flow in friction stir welding by Jain R., Pal S. K., Singh S. B. Proceedings of the 6th International and 27th All India Manufacturing Technology, Design and Research Conference 1892-1895 (2016)
Simulation of material flow in friction stir welding by Jain R., Pal S. K., Singh S. B. Proceedings of the International Conference on Advances in Materials and Manufacturing 51-56 (2016)
Evolution of microstructure and texture in 304 austenitic stainless steel by two different modes of hot rolling by Rout M., Pal S. K., Singh S. B. Proceedings of the International Conference on Advances in Materials and Manufacturing 411-416 (2016)
Spray cooling of hot steel plate using water based TiO2 nanofluid by Chakraborty S., Pal S. K., Chakraborty S. AIChE Annual Meeting - (2016)
Study on static recrystallisation behaviour of 304LN stainless steel by two-stage compression test by Rout M., Ranjan R. , Pal S. K., Singh S. B. Proceedings of the 6th International and 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR) 1007-1011 (2016)
Study on the delamination of GFRP composites in drilling - a finite element model by Joshi H. S., Pal S. K., Chakraborty G. Proceedings of the 6th International and 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR) 1879-1883 (2016)
Experimental study of plastic anisotropy in hot cross rolling by Rout M., Pal S. K., Singh S. B. 2nd International Conference on Rolling and Finishing Technology of Steel (RAFTS 2015) 155-158 (2015)
Friction stir welding : application and development by Kumari K., Pal S. K. 4th National Conference on Advances in Metrology (Ad-Met) - (2015)
Multi objective optimization of friction stir welding parameters for joining of two dissimilar thin aluminum sheets by Kesharwani R. K., Panda S. K., Pal S. K. International Conference on Materials Processing and Characterization (ICMPC 2014) 178-187 (2014)
Novel concept of twin-tool in friction stir welding: a study on hardness of non-heat treated and heat treated commercial pure Al alloys by Kumari K., Pal S. K., Singh S. B. International Conference on Friction Based Processes, ICFP 2014 - (2014)
Numerical simulation of temperature field of AISI 316L stainless steel during cross rolling by Rout M., Pal S. K., Singh S. B. International Conference on Innovation in Design, Manufacturing and Concurrent Engineering (IDMC 2014) 81-84 (2014)
Accumulative roll bonding of AA6005 and AA1060 metal strip: study on microstructure, mechanical properties and minimum bonding criteria by Sardar S., Mandal A. , Pal S. K., Singh S. B. Proceedings of the 5th International and 26th All India Manufacturing Technology, Design and Research Conference 610--610- (2014)
Study on the novel twin-tool system in friction stir welding process by Kumar K., Pal S. K., Singh S. B. Proceedings of the 5th International and 26th All India Manufacturing Technology, Design and Research Conference 495--495- (2014)
Finite element analysis of cross rolling on AISI 304 stainless steel: prediction of stress and strain fields by Rout M., Pal S. K., Singh S. B. 5th International and 26th All India Manufacturing Technology, Design and Research Conference AIMTDR 2014 487-487 (2014)
Finite element simulation of effect of process parameters on forces and spindle torque in friction stir welding by Jain R., Pal S. K., Singh S. B. International Conference on Friction Based Processes, ICFP 2014 - (2014)
Finite element simulation of temperature distribution and stress variation in AISI 1040 steel by friction stir welding/processing by Jain R., Pal S. K., Singh S. B. 5th International and 26th All India Manufacturing Technology, Design and Research Conference AIMTDR 2014 486--486- (2014)
Friction stir processing of Al alloy by using twin tool by Kumari K., Pal S. K. International Colloquim on Materials, Manufacturing, and Metrology, ICMMM-2014 - (2014)
Artificial neural network based monitoring of weld quality in pulsed metal inert gas welding using wavelet packets of current signal by Pal K., Pal S. K. National conference on recent trends in manufacturing science and technology (RTMST-2013) - (2013)
Estimation of thrust force using finite element analysis during drilling of GFRP composites by Joshi H. S., Pal S. K., Chakraborty G. , Mandal P. S. International Conference on Global Technology Initiatives - (2012)
Multi-sensor based prediction of weld quality characteristics in pulsed GMAW using artificial neural network by Pal K., Pal S. K. 4th International AIMTDR - (2012)
Neural network based modeling of joint mechanical properties in pulsed MIG welding using statistical features of sensor signals by Pal K., Pal S. K. National Conference on Advances in Simulation and Optimization Techniques in Mechanical Engineering - (2012)
Accurate detection of weld defects using chirplet transform by Chatterjee S., Chatterjee R. , Pal S. , Pal K. , Pal S. K. 4th International Conference on Computer and Automation Engineering (ICCAE) - (2012)
Experimental study of ultra-fast cooling of a hot steel plate by air-assisted spray at high mass flux by Mohapatra S. S., Reddy P. V., Chakraborty S. , Pal S. K. International Conference on Advanced in Materials and Materials Processing (ICAMMP) - (2011)
Parametric optimization in WEDM of WC-Co composite by neuro-genetic technique by Saha P., Pal S. K., Saha P. Proc. of the International Conference on Mechanical Engineering - (2011)
Texture analysis of turned surface images using grey level co-occurrence technique by Dutta A., Dutta S. , Pal S. K., Sen R. , Mukhopadhyay S. International Conference of Future Materials Engineering and Industrial Applications (ICFMEIA) - (2011)
Artificial neural network based prediction of metal deposition in pulsed MIG welding using sensor signals by Pal K., Pal S. K. National Conference on Recent Advances in Manufacturing Technology and Management (RAMTM 2010) 169-174 (2010)
Effect of process parameters on cutting forces and temperature in turning AISI 4340 using finite element approach by Jain R., Pal S. K. National Conference on Recent Advances in Manufacturing Technology and Management (RAMTM 2010) - (2010)
Finite element estimation of cutting parameters in drilling glass fiber reinforced plastic (GFRP) plates by Das N. C., Pal S. K., Mandal P. S. National Conference on Recent Advances in Manufacturing Technology and Management (RAMTM 2010) - (2010)
Modeling and Multi-Objective Optimization in Wire Electro-Discharge Machining of in-situ TiC reinforced austenitic manganese steel matrix composite by Saha P., Pal S. K., Saha P. National Conference on Recent Advances in Manufacturing Technology and Management (RAMTM 2010) - (2010)
Statistical pattern analysis of white blood cell nuclei morphometry by Ghosh M., Das D. , Mandal S. , Chakraborty C. , Pal M. , Maity A. , Pal S. K., Roy A. K. IEEE Students Technology Symposium - (2010)
Strategies for intelligent tool wear prediction in a machining process by Patra K., Pal S. K., Bhattacharyya K. 23rd International congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2010) 623-626 (2010)
Drilling of glass fibre reinforced plastic (GFRP) composite: experimental investigation on effects of process parameters by Ravishankar S. N., Pal S. K., Samantaray A. K. International Conference on Advances in Mechanical Engineering (ICMAE 2009) - (2009)
Drilling of glass fibre reinforced plastics: A review by Ravishankar S. N., Pal S. K., Samantaray A. K. International Conference Emerging Research and Advances in Mechanical Engineering (ERA 2009) - (2009)
Estimation of heat generation and cutting tool temperature in orthogonal machining: A review by Priyadarshini A., Pal S. K., Samantaray A. K. International Conference Emerging Research and Advances in Mechanical Engineering (ERA 2009) - (2009)
Finite element modeling of turning operation: study on the effect of cutting velocity and feed on cutting and thrust force by Sannapureddy H., Priyadarshini A. , Pal S. K. International Conference on Advances in Mechanical and Building Sciences in the 3rd Millennium (ICAMB 2009) - (2009)
Finite element study of serrated chip formation by Priyadarshini A., Pal S. K., Samantaray A. K. International Conference on Advances in Mechanical Engineering (ICMAE 2009) - (2009)
Modeling and control of a gas metal arc welding process using soft computing tools and sensor signals: A review by Pal K., Pal S. K. International Conference Emerging Research and Advances in Mechanical Engineering (ERA 2009) 651-656 (2009)
Characterization of weld quality and process stability in pulsed MIG welding using sensor signals by Pal K., Pal S. K. International Conference on Advances in Mechanical Engineering (ICMAE 2009) 1019-1023 (2009)
A neural network approach for modeling the wire electro discharge machining of tungsten carbide cobalt composite by Saha P., Singh A. , Pal S. K., Saha P. Proceedings of the Global Conference on Production and Industrial Engineering, CPIE-2007 - (2007)
A neuro-memetic model for the prediction of drill flank wear by Garg S., Chakraborty D. , Deb S. , Pal S. K. International Conference on Advances in Manufacturing and Technology Management (ICAMTM) 9-15 (2007)
Application of fully supervised radial basis function network for prediction of machining performance in wire-EDM by Saha P., Pal S. K., Saha P. International Conference of Precision, Meso, Micro and Nano Engineering (COPEN 2007) - (2007)
Artificial neural network based tool condition monitoring in drilling using vibration signal analysis by Patra K., Pal S. K., Samantaray A. K. Proceedings of the 4th International Conference of Theoretical, Applied Computational and Experimental Mechanics (ICTACEM) - (2007)
Determination of optimal pulse metal inert gas welding parameters using neuro-GA technique by Pal S., Pal S. K., Samantaray A. K. Proceedings of the 4th International Conference of Theoretical, Applied Computational and Experimental Mechanics (ICTACEM) - (2007)
Prediction of drill flank wear using a neuro-GA model by Ranjan R., Kumar A. , Patra K. , Pal S. K. Proceedings of the Global Conference on Production and Industrial Engineering, CPIE-2007 - (2007)
Prediction of welding joint strength and bead geometry in pulsed gas metal arc welding using artificial neural network by Sarkar A., Pal S. , Pal S. K., Samantaray A. K. Proceedings of the Global Conference on Production and Industrial Engineering, CPIE-2007 - (2007)
Application of a soft computing technique in drilling by Patra K., Pal S. K., Bhattacharyya K. Proceedings of the National Conference on Soft Computing Techniques for Engineering Applications 137-144 (2006)
A review on gas metal arc welding process modelling and control using soft computing by Pal S., Pal S. K., Samantaray A. K. Proceedings of the National Conference on Soft Computing Techniques for Engineering Applications 145-152 (2006)
Drill wear monitoring using current signature wavelet packet transform and artificial neural network by Patra K., Pal S. K., Bhattacharyya K. IEEE International Conference on Industrial Technology 1344-1348 (2006)
Effect of basis width on the performance of radial basis function network in prediction of drill wear by Garg S., Pal S. K., Chakraborty D. Proceedings of the National Conference on Recent Trends in Information Systems and Management 194-202 (2006)
Modelling of electric discharge machining using artificial neural network by Mandal D., Pal S. K., Saha P. Proceedings of the National Conference on Soft Computing Techniques for Engineering Applications 153-158 (2006)
Prediction of drill flank wear using radial basis function neural network by Panda S. S., Chakraborty D. , Pal S. K. Proceedings of the National Conference on Soft Computing Techniques for Engineering Applications 94-102 (2006)
Soft computing techniques applied to tool condition monitoring in drilling - a review by Patra K., Pal S. K. Proceedings of the 12th National Conference on Machines and Mechanisms 189-194 (2005)
A survey of soft computing methods used in Wire-EDM by Saha P., Pal S. K., Saha P. Proceedings of the 12th National Conference on Machines and Mechanisms 243-248 (2005)
Bond graph modelling of temperature distribution within a slab in reheat furnace by Mandal M., Pal S. K. Proceedings of the National Conference on Advance Manufacturing and Robotics 427-434 (2004)
An integrated bond graph model for multipass rolling processes by Pal S. K., Linkens D. K. IEEE International Conference on Systems, Man and Cybernatics 50-50 (2002)
A novel approach to metallurgical process modelling by Pal S. K., Mukherjee A. , Karmakar R. International Conference on Advances in Materials and Materials Processing (ICAMMP) 591-598 (2002)
Bond graph and finite element analysis of temperature distribution in hot rolling processes by Pal S. K., Talamantes-silva J. , Linkens D. A. International Conference on Thermomechanical Processing : Mechanics, Microstructure, Control - (2002)
Bond graph modelling of thermal phenomena in hot rolling by Pal S. K., Linkens D. A. International Conference of Bond Graph Modelling (ICBGM) 253-256 (2001)
Effect of roll gap on temperature distribution in slab during steel hot rolling: a bond graph approach by Pal S. K., Linkens D. A. IFAC Symposium on Automation in Mining, Mineral and Metal Processing 59-62 (2001)
Effect of roll speed on temperature in hot metal rolling: a bond graph approach by Pal S. K., Linkens D. A. European Simulation Symposium - (2001)
Effect of surface motion on metal cooling and microstructural evolution : a bondgraphic view by Pal S. K., Mukherjee A. , Karmakar R. International Conference of Bond Graph Modelling (ICBGM) 202-207 (1999)

Innovation: Research

AI Solution for Defect Detection in Ultrasonic Time-of-flight Diffraction (iToFD) by Vishwanathan A., Dutta A. , Mukherjee A. , Pal S. K. - (2024)
AI Solution for Health Monitoring of Exhauster (EyeVib), Developed for Research and Development Centre for Iron and Steel (RDCIS, Ranchi) by Agarwal A., Das A. , Mondal K. , Dutta A. , Pal S. K., Kumar R. , Appukuttan A. , Mallarapu S. - (2024)
Intelligent Tyre Tracer, developed for TATA Motors Jamshedpur by Nayak S., Baro A. , Swargiary L. , Prajapati D. K., Mukherjee A. , Dutta A. , Pal S. K. - (2024)
AI Solution for Classification and Detection of Welding Defects (iWeld)" for "Garden Reach Shipbuilders and Engineers Ltd. (GRSE)". by Mukherjee A., Pal S. K. - (2023)

AI Enabled NDT System by Pal S. K. - (2023)

Book Chapter/Section

Tubular Structures: Welding Difficulty and Potential of Friction Stir Welding by Sen D., Pal S. K., Panda S. K. Welding Technology 229-252 (2021)
Welding of Dissimilar Metals Challenges and a Way Forward with Friction Stir Welding by Sahu S., Pal S. K., Shome M. , Srirangam P. Welding Technology 167-192 (2021)
An Application from a Defect A Friction Stir Channeling Approach by Sarkar P., Pal S. K., Bhattacharya A. , Shollock B. Welding Technology. 131-166 (2021)
Industry 4.0 in Welding by Mishra D., Pal S. K., Chakravarty D. Welding Technology 253-298 (2021)
Microstructure and Texture in Welding: A Case Study on Friction Stir Welding by Nayak S. S., Mahto R. P., Pal S. K., Srirangam P. Welding Technology 193-228 (2021)
Friction stir welding for joining of polymers by Mishra D., Sahu S. K., Mahto R. P., Pal S. K., Pal K. Strengthening and Joining by Plastic Deformation 123-162 (2019)
Study on the delamination of GFRP composites in drilling: a finite element model by Joshi H. S., Pal S. K., Chakraborty G. Simulations for design and manufacturing 1-43 (2018)
Thermomechanical simulation of friction stir welding process using lagrangian method by Jain R., Pal S. K., Singh S. B. Simulation for design and manufacturing 103-146 (2018)
Numerical modeling methodologies for friction stir welding process by Jain R., Pal S. K., Singh S. B. Computational Methods and Production Engineering 125-168 (2017)
Finite element modeling of hot rolling: Steady- and unsteady-state analyses by Rout M., Pal S. K., Singh S. B. Computational Methods and Production Engineering 83-124 (2017)
Frictions stir welding: scope and recent development by Jain R., Kumari K. , Kesharwani R. , Kumar S. , Pal S. K., Singh S. B., Panda S. K., Samantaray A. K. Modern manufacturing engineering: research, development and education 179-229 (2015)
Solid-state joining by roll bonding and accumulative roll bonding by Sardar S., Mandal A. , Pal S. K., Singh S. B. Advances in Material Forming and Joining 351-377 (2015)
Cross rolling: a metal forming process by Rout M., Pal S. K., Singh S. B. Modern manufacturing engineering: research, development and education 41-64 (2015)
Digital image processing in machining by Dutta S., Pal S. K., Sen R. Modern mechanical engineering 367-410 (2014)
Finite element modeling of chip formation in orthogonal machining by Priyadarshini A., Pal S. K., Samantaray A. K. Statistical and computational techniques in manufacturing 101-144 (2012)

Book

Digital twin : Fundamental Concepts to Applications in Advanced Manufacturing by Pal S. K., Mishra D. , Pal A. , Dutta S. , Chakravarty D. , Pal S. 1-501 (2021)

Workshop

Finite element application in metal cutting by Pal S. K., Muramalla B. S. 43-56 (2004)

Mechanical Engineering

Faculty

Surjya Kanta Pal

Responsibilities

Research Areas

Principal Investigator

Co-Principal Investigator

Ph. D. Students

Avishek Mukherjee

Gaddam Kranthikumar

Md Noorul Hoda

Pooja Sarkar

Ranjan Kumar Vishwakarma

Rishabh Swarnkar

Sayan Das

Soumya Sangita Nayak

Souvik Karmakar

Suparna Bhattacharyya