No Record Found.

Journal
• Influence of TiO Pickup on the High Temperature Characteristics of Industrial Mold Flux during Continuous Casting of Ti-Alloyed Low-Carbon Steel by Sahoo P.P., Ranjan M., Kar M.K., Paliwal M., Kundu S., Borra C.R. Mining, Metallurgy and Exploration 43 1907-1918 (2026)
• Pre-reduction of Iron Ore with Ammonia and Its Utilization to Reduce Coke Rate and CO2 Emission in the Blast Furnace by Singha P., Kalyan K.P., Murali D.K., Paliwal M. Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science 57 576-595 (2026)
• Scalable and Sustainable Growth of Bronze Telluride for Thermoelectric Energy Harvesting by Rajeev K., Abhijith M.B., Quispe J.G., Pal V., Paliwal M., Roy A.K., Autreto P.A.D.S., Punathil Raman S., Ajayan P.M., Tiwary C.S. Advanced Sustainable Systems 10 - (2026)
• Manganese- Copper- Gallium Alloys for Sustainable Refrigeration Through a Synergistic Study of Magnetocaloric and Mechanical Behavior by Tiwari N., Mishra S., Kumar A., Malik V.K., Roy D., Paliwal M., Chaudhary V., Singh A.K., Tiwary C.S. Advanced Engineering Materials 28 - (2026)
• Microstructure engineered multiphase tellurides with enhanced thermoelectric efficiency by Pal V., Sivaprahasam D., Tiwary C.S., Paliwal M. Journal of Materials Chemistry A 14 3771-3791 (2026)
• Magnetocaloric effect in Mn-rich Heusler-derived alloys for room temperature-based applications by Tiwari N., Mishra S., Sarkar S., Talapatra S., Palit M., Paliwal M., Singh A.K., Tiwary C.S. Journal of Materials Chemistry C 13 10789-10803 (2025)
• First-principles investigation of alloying effects on stacking fault energies and lattice constants of -Ni3Nb: A comprehensive study by Hasan A., Biswal S., Chakrabarti D., Paliwal M. Scripta Materialia 262 - (2025)
• Improvement in thermoelectric properties of directionally solidified Bi2Te3-AgBiTe2 eutectic via energy filtering effect by Jigi G.M., Pal V., Pati D., Sreeram P.R., Haile B.S., Negedu S.D., Paliwal M., Olu F.E., Tiwary C.S. Journal of Alloys and Compounds 1039 - (2025)
• Decrease in Specific Power and CO2 Emissions in Fe Cr Production Using Pre-reduction of Various Chromite Ores with Ammonia by Kalyan K.P., Kundu R., Singha P., Das S., Paliwal M. Journal of Sustainable Metallurgy 11 4486-4501 (2025)
• Enhanced Magnetocaloric and Mechanical Properties of Novel Mn Ni Cu and Mn Ni Ga Alloys for Near-Room Temperature Applications by Tiwari N., Mishra S., Srivastava A., Sarkar S., Chaudhary V., Paliwal M., Singh A.K., Tiwary C.S. Advanced Engineering Materials 27 - (2025)
• Enhanced strength-ductility synergy in a rare-earth free Mg alloy for bio-implant application: Insights into the role of bimodal microstructure and slip activity by Bairagi D., Rakshit R., Kumar R., Jayabalan B., Mukherjee S., Paliwal M., Mandal S. Materials Science and Engineering: A 929 - (2025)
• Microstructure evolution and thermoelectric behaviour of directionally solidified Bi2Te3 based multiphase thermoelectric by Jigi G.M., Pal V., Haile B.S., Sreeram P.R., Pati D., Negedu S.D., Paliwal M., Olu F.E., Tiwary C.S. Journal of Alloys and Compounds 1010 - (2025)
• Microstructure evolution and thermoelectric behaviour of directionally solidified Bi2Te3-Ga2Te3 eutectic alloy by Pal V., Legese S.S., Sreeram P.R., Chattopadhyay K., Paliwal M., Tiwary C.S. Journal of Physics D: Applied Physics 58 - (2025)
• Understanding the interface-driven thermoelectric behaviour of Bi2Te3 Ga2Te3 alloys by Pal V., Sreeram P.R., Legese S.S., Srivastava P., Rohini R., Chattopadhyay K., Paliwal M., Tiwary C.S. Journal of Physics and Chemistry of Solids 207 - (2025)
• Applicability of Waste from Al Industry toward Dephosphorization of Hot Metal in Primary Steel Making by Padala H., Das S., Pal V., Goyal P., Misra S., Paliwal M. Steel Research International 96 - (2025)
• CO2 to C conversion using Ga and Sn-based alloys based on thermochemical approach by Kundu M., Das S., Pal V., Paliwal M. Journal of Environmental Chemical Engineering 13 - (2025)
• Unveiling Si's role in Laves phase dissolution in IN718 through experimentally guided molecular insights by Pati D., Biswal S., Sahoo D., Chatterjee S., Chakraborty M., Paliwal M. Journal of Alloys and Compounds 1036 - (2025)
• Unveiling Si's Role in Laves Phase Dissolution in IN718 Through Experimentally Guided Molecular Insights by Pati D., Biswal S. , Sahoo D. , Chatterjee S. , Chakraborty M. , Paliwal M. Journal of Alloys and Compounds 1034 181742- (2025)
• Validated kinetic modelling of ladle furnace process for predicting inclusions in API steel grade by Ranjan M., Swain A.N.S.S., Sahoo P.P., Sarkar S., Nayak P., Palai P., Paliwal M. Ironmaking and Steelmaking - (2025)
• Evaluation of a Mining Waste as an Oxygen Carrier for Syngas Production Using Chemical Looping in a 3 kWh Fluidized Bed Reactor by Das S., Paliwal M. ACS Omega 10 43391-43403 (2025)
• Tetragonal ferrite: a short review by Singh S.B., Paliwal M. Journal of Materials Science 60 1726-1735 (2025)
• Experimental and theoretical study of size-dependent phase evolution in NaCl-KCl alloys by Kumar S., Mishra S.S., Naskar N., Sarkar S., Kashyap S., Katiyar N.K., Paliwal M., Biswas K., Tiwary C.S., Chattopadhyay K. Next Materials 6 - (2025)
• Effect of Ce concentration on in-vitro bio-corrosion and cytocompatibility of Mg 1Mn xCe alloys by Patnaik S., Bairi L.R., Bairagi D., Kumar R., Paliwal M., Palit M., Mandal S. Metals and Materials International - (2025)
• Microstructure and thermoelectric properties of as-cast Ag2Te/AgBiTe2 and Ag2Te/Bi2Te3 two-phase alloys by Serbesa A.T., Pal V., Legese S.S., Mukherjee S., Das S., Kumar B., Adamo C.G., Sreeram P.R., Paliwal M., Olu E.F., Tiwary C.S., Chattopadhyay K. Journal of Physics and Chemistry of Solids 190 - (2024)
• Growth of dual-phase high entropy alloy films using thermal vapor deposition by Dehury R.K., Gautam A., Behera R., Rashid A., Bapat R., Paliwal M. Materials Characterization 212 - (2024)
• Microstructure Evolution in a Cast and Homogenized Nd-Fe-B-Cu Alloy: Experimental Study and Thermodynamic Calculations by Patnaik S., Kumar R., Pal V., Paliwal M., Palit M., Mandal S. JOM 76 5324-5331 (2024)
• Blast Furnace Slag Formation Prediction Model Using Classical Thermodynamics by Kumar B., Hazra S., Sahoo M., Pal P., Paliwal M., Nag S. Steel Research International - (2024)
• Investigating Homogenization Kinetics in IN718 Alloy: A Comprehensive Strategy Involving Si-Enriched Scrap Utilization and Optimization of Two-Stage Heat Treatment by Pati D., Mishra S., Kumar N., Paliwal M. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 55 2825-2839 (2024)
• Investigation of Laves Phase Dissolution and Homogenization Kinetics in IN718 with 0.4 Wt.% Si Through a Combination of Characterization and Calculations by Pati D., Mishra S., Singh A.K., Kumar N., Paliwal M. JOM - (2024)
• Antimicrobial and antiviral properties of stainless steel enhanced by controlled silver nano-island deposition: A safe and sustainable by design approach by Malvi B., Pidathala R.T., Shewale D.J., Pandey P.K., Patel N., Dehury R., Das S., Paliwal M., Singh Gautam A.R., Mishra A., Soppinna V., Misra S.K., Chakraborty S. Journal of Materials Research and Technology 33 8644-8654 (2024)
• Capturing the Interaction Between Mold Flux and Different Steel Compositions During Industrial-Scale Continuous Casting Trials by Sahoo P., Ranjan M. , Srivatsava K. , Paliwal M. , Borra C. R. JOM 76 - (2024)
• Effect of Thermomechanical Processing Induced Retained Strain on In Vitro, In Vivo Biodegradation Response and Cytocompatibility of Mg Alloy by Bairagi D., Mandal S., Hoque S., Ghosh D., Nandi S.K., Mondal S., Roy M., Paliwal M., Mandal S. ACS Biomaterials Science and Engineering 10 6191-6209 (2024)
• Ferrochrome Production in a Submerged Electric Arc Furnace: Fundamental Analysis Based upon the FactSage-Macro Program Approach by Singha P., Das S., Kundu S., Majumdar K., Singh A., Paliwal M. Steel Research International 95 - (2024)
• Elevated Temperature Mechanical Property Degradation of AA7475 Aluminum Alloy: In Situ Microstructure Analysis by Siddiqui A.H., Sahoo D., Patil J., Paliwal M., Mishra S. Journal of Materials Engineering and Performance - (2024)
• Enhanced in-vitro degradation resistance and cytocompatibility of a thermomechanically processed novel Mg alloy: Insights into the role of microstructural attributes by Bairagi D., Mandal S., Roy M., Paliwal M., Mandal S. Journal of Magnesium and Alloys 12 700-725 (2024)
• Value Extraction from Ferrochrome Slag: A Thermochemical Equilibrium Calculation and Experimental Approach by Sahu N., Kapure G.U., Kumar P., Tripathy S.K., Biswas A., Randhawa N.S., Paliwal M. Minerals 14 - (2024)
• Proposed Compositions in a Ni-Mn-Ga System for Magnetocaloric Applications by Tiwari N., Pal V., Das S., Paliwal M. Journal of Electronic Materials 53 1773-1795 (2024)
• A Thermodynamic and Kinetic-Based Argon Oxygen Decarburization Process Model and Validation with Plant Data by Jagadish R., Saragadam B.S.S., singha P., Rajesh V., Yadav P., Singh A.K., Paliwal M. Steel Research International - (2024)
• Proposed compositions in Mn-Ni-Cu system for magnetocaloric application using a combination of thermodynamic modeling and experiments by Tiwari N., Das S., Paliwal M. Journal of Applied Physics 135 - (2024)
• Study on the composition effect upon the microstructure development in Cu-Fe alloys prepared using a W-wire method by Sahoo D., Mishra B., Srivastava A., Mishra S., Paliwal M. Materials Characterization 199 - (2023)
• Utilization of laterite ore as an oxygen carrier in chemical looping reforming of methane for syngas production by Das S., Biswas A., Bhattacharya J., Tiwary C.S., Paliwal M. International Journal of Hydrogen Energy - (2023)
• Microstructure design in Bi-Ga-Te system using a combination of thermodynamic calculations and experiments for potential thermoelectric material by Pal V., Kumar B., Paek M.-K., Tiwary C.S., Paliwal M. Materials Chemistry and Physics 297 - (2023)
• The Miller 03356 IVA iron: Insights into the formation mechanism of microplessite by Ray D., Ghosh S. , Paliwal M. , Mishra S. , Jha J. Planetary and Space Science 226 105622-105628 (2023)
• Thermochemical behaviour, solidification, thermal stability and oxidation of Al-Mg2Si composites: An experimental and thermodynamic study by Biswas P., Paliwal M., Mondal M.K. Materials Today Communications 35 - (2023)
• Spontaneous hydrogen production using gadolinium telluride by Kumbhakar P., Parui A., Dhakar S., Paliwal M., Behera R., Gautam A.R.S., Roy S., Ajayan P.M., Sharma S., Singh A.K., Tiwary C.S. iScience 26 - (2023)
• A unified modeling approach and experimental validation to predict the mechanical properties in age hardened magnesium alloys by Samrah S., Kumar N. , Patil J. , Paliwal M. , Ayyagari R. Mechanics of Materials 166 104221- (2022)
• A unified modeling approach and experimental validation to predict the mechanical properties in age hardened magnesium alloys by Sarmah S., Kumar N., Patil J., Paliwal M., Ayyagari R.S. Mechanics of Materials 166 - (2022)
• Anaerobe Syntrophic Co-culture-Mediated Green Synthesis of Ultrathin Niobium Carbide (NbC) Sheets for Flexoelectricity Generation by Mahle R., Mahapatra P.L., Singh A.K., Kumbhakar P., Paliwal M., Tiwary C.S., Banerjee R. ACS Sustainable Chemistry and Engineering 10 13650-13660 (2022)
• Oxidation of Ferrochrome Slag Using CO2: A Possible O2 Carrier in CLC Process by Das S., Biswas A. , Ghoroi C. , Konnar B. , Paliwal M. Journal of Sustainable Metallurgy 8 343-359 (2022)
• Oxidation of Ferrochrome Slag Using CO2: A Possible O2 Carrier in CLC Process by Das S., Biswas A., Ghoroi C., Konar B., Paliwal M. Journal of Sustainable Metallurgy 8 343-359 (2022)
• Superior strength-ductility combination in a Ni-modified medium manganese lightweight steel with the determining role of phase transformation and recrystallization behaviour by Kumar S., Sarkar A., Prasad A.D., Paliwal M., Mukherjee S., Mandal S. Materials Science and Engineering A 835 - (2022)
• Superior strength-ductility combination in a Ni-modified medium manganese lightweight steel with the determining role of phase transformation and recrystallization behaviour by Kumar S., Sarkar A. , Prasad D. , Paliwal M. , Mukherjee S. , Mandal S. Materials Science and Engineering A 835 - (2022)
• Development of a self-consistent thermodynamic database for Ga-In-Te system and experimental validation: a potential system for thermoelectric application by Pal V., Kumar B., Choi J., Kumar B., Tiwary C.S., Paliwal M., Paek M.-K. Journal of Materials Science 57 18178-18194 (2022)
• Phase transformation of Ag Cu alloy nanoparticle embedded in Ni matrix by Tiwari K., Paliwal M., Biwas K. Journal of Materials Research 37 4124-4139 (2022)
• Ion implantation of 109Ag stable isotope as a tracer in SS316L biomedical implant for failure detection by Malvi B., Chaudhari R., C B., Kumar A., K A., Das S., Paliwal M., Misra S.K. Materials Today Communications 33 - (2022)
• A comparative study on the microstructure development in Fe50Cu50 alloy prepared using aerodynamic levitation process and W-wire held process by Sahoo D., Paliwal M., Srivastava A., Mishra S. Journal of Alloys and Compounds 925 - (2022)
• Hydrogen production using chemical looping technology: A review with emphasis on H2 yield of various oxygen carriers by Das S., Biswas A., Tiwary C.S., Paliwal M. International Journal of Hydrogen Energy 47 28322-28352 (2022)
• A Review on the Material Development and Corresponding Properties for Power Plant Applications by Patil J., Paliwal M. , Mishra S. Materials performance and characterization 11 - (2022)
• Materials performance and characterization by Patil J.P., Paliwal M., Mishra S.K. Materials Performance and Characterization 11 - (2022)
• Implications of second phase precipitates evolved through optimized homogenization treatment on mechanical and in-vitro corrosion behaviour of Mg-4Zn-0.5Ca-0.8Mn alloy by Bairagi D., Duley P. , Paliwal M. , Mandal S. Journal of Magnesium and Alloys - (2022)
• Thermodynamic modelling of the ternary Bi-Ga-Te system for potential application in thermoelectric materials by Kumar B., Tiwary C.S., Paek M.-K., Paliwal M. Calphad: Computer Coupling of Phase Diagrams and Thermochemistry 74 - (2021)
• Thermodynamic modelling of the ternary Bi-Ga-Te system for potential application in thermoelectric materials by Kumar B., Tiwary C. S., Kim M. , Paliwal M. CALPHAD 74 - (2021)
• Thermodynamic optimization of the ternary Ga-Sn-Te system using modified Quasichemical model by Kumar B., Paliwal M. , Tiwary C. S., Paek M. METALS 11 - (2021)
• Thermodynamic optimization of the ternary Ga-Sn-Te system using modified Quasichemical model by Kumar B., Paliwal M., Tiwary C.S., Paek M.-K. Metals 11 - (2021)
• Evolution of microstructure, phases and mechanical properties in lean as-cast Mg Al Ca Mn alloys under the influence of a wide range of Ca/Al ratio by Sanyal S., Paliwal M., Bandyopadhyay T.K., Mandal S. Materials Science and Engineering A 800 140322- (2021)
• Precipitate evolution during aging and its individual role on high-temperature hot corrosion response in Alloy 617 by Bhuyan P., Paliwal M., Sarma V.S., de Boer B., Mitra R., Mandal S. Journal of Alloys and Compounds 871 159499- (2021)
• Improved mechanical and wear properties of Cu-Ga-In ternary alloys through liquid reinforcement by Das R., Pal V. , Kumar B. , Paliwal M. , Palit M. , Paek M. , Tiwary C. S. Materials Today Communications 27 - (2021)
• Improved mechanical and wear properties of Cu-Ga-In ternary alloys through liquid reinforcement by Das R., Pal V., Kumar B., Roy A.K., Paliwal M., Palit M., Paek M.-K., Tiwary C.S. Materials Today Communications 27 - (2021)
• Microstructure and Wear Behaviour of a Novel Fe-Cr-V- C Plasma Transferred Arc Coating by Ranjan A., Kishore K., Pal V., Adhikary M., Kumar A., Tiwary C.S., Paliwal M. JOM 73 4328-4337 (2021)
• Solidification behavior of nanoscaled tri-phasic bismuth-indium-tin alloy particles embedded in Al Cu Fe quasicrystalline matrix by Tiwari K., Paliwal M. , Verma M. , Biswas K. Journal of Alloys and Compounds 867 - (2021)

Principal Investigator

• Evaluation of Different Process Parameters during Mg Production in an Industrial Scale
• Thermodynamic and Kinetic Calculations applied to the Study of Electrochemical Energy Conversion Devices and Emerging Coating Technologies
• Kinetic Model to Predict the Change in Mould Flux Composition during Continuous Casting of Medium Alloy Steels
• Utilization of chromite over burden as an Oxygen carrier material for clean energy production using chemical looping technique
• Developing Laves Phase Dissolution Maps and Homogenization Treatment for Ni 718 Alloy depending on Si Content
• Mapping of Slag Path in Blast Furnace and Feasibility of Selective Melting of Low-grade Ore
• Development of a Validated Process Model for Ladle Furnace including a Kinetic Model to Predict the Inclusion Size, Count and Distribution
• Ironmaking Course
• Development of graphite brush
• Thermodynamic and kinetic calculations applied to the study of electrochemical energy conversion devices and emerging coating technologies
• Substitution of Limestone with Gypsum in Mitsubishi C-Furnace.
• Improvement of the processing condition for the production of defect-free high strength Ductile iron pipe
• Developing new Dephosphorization fluxes for hot metal pre-treatment stage and designing new mould fluxes for casting of high Ti containing steels using waste residues from Aluminum Industry
• Developing new Dephosphorization fluxes for hot metal pretreatment stage and designing new mould fluxes for casting of high Ti containing steels using waste residues from Aluminum Industry
• understanding of thermodynamic calculations in refractories and steel flux
• Substitution of Limestone with Gypsum in Mitsubishi C-Furnace.
• Application of thermodynamic calculations to glass making

Co-Principal Investigator

• Portable and automated 3D printing of metal-ceramic composites