Indian Institute of Technology Kharagpur |

Journal

Comparative evaluation of the characteristics of calcium phosphate coating s properties synthesized using chemical & biosurfactant-aided pulsed current electrodeposition. by Prasad P. S., Hazra C. , Byram P. K., Sethi S. S., Chakravorty N. , Sen R. , Das S. , Das K. Surfaces and Interfaces 56 1-20 (2025)
Comparative Insights of Bio and Chemical Surfactants in CuO Nanoparticle Synthesis: Unveiling the Superior Antibacterial Efficacy of biosurfactants. by Mandal S., Hazra C. , Joshi N. , Kumar P. , Sen R. , Das S. , Das K. Journal of Industrial and Engineering Chemistry 147 566-583 (2025)
Study of thermodynamic and kinetic behaviours of tin anode and its variation with state of charge, state of health and operating current rates of the battery by Sau A., Das K. , Das S. Journal of Electroanalytical Chemistry 981 - (2025)
Evaluating antimicrobial activity: Biogenic vs. Chemically Functionalized Zinc Oxide Nanoparticles. by Mandal S., Hazra C. , Joshi N. , Sen R. , Das S. , Das K. Materials Letters 392 1-4 (2025)
Phase transformation kinetics of the formation of lithiated phase over charge-discharge cycling in tin anode for the lithium ion battery: A quantitative deep dive by Sau A., Das K. , Das S. Journal of Alloys and Compounds 1025 - (2025)
Layered intercalated architecture of Ni2V2O7 nanoparticle and N-doped reduced graphene oxide composite sheet as an electrode material for solid-state asymmetric supercapacitor by Anand R., Sau A. , Das K. , Das S. Journal of Power Sources 642 - (2025)
Unveiling the unique site preference of Ga in the defect wurtzite type In2Se3 Ga2Se3 system: an experimental and computational study by Sethi S., Lakshan A. , Roy A. , Das S. , Das K. , Jana P. P. Dalton Transactions - (2025)
Influence of the peak current density on the structural, tribological, and electrochemical performance of Zn-Co alloy coatings electrodeposited from a Choline Chloride-Ethylene glycol-based deep eutectic solvent by Kumari A., Satpathy B. , Prasad P. S., Guerrero J. M., Das S. , Das K. Surfaces and Interfaces 64 - (2025)
A comparative evaluation of green surfactant-assisted calcium phosphate coatings developed through electro-deposition & biomimetic routes. by Prasad P. S., Byram P. K., Hadem H. , Hazra C. , Sen R. , Das S. , Das K. Colloids and Surfaces A: Physicochemical and Engineering Aspects 707 1-14 (2025)
A comparison of chemical and biogenic surfactant mediated synthesis of ZnO/CuO: Highlighting the antimicrobial activity of the bio-functionalized metal oxide nanoparticles by Mandal S., Hazra C., Joshi N., Jain N., Kumar P., Sen R., Das S., Das K. Colloids and Surfaces A: Physicochemical and Engineering Aspects 690 133780- (2024)
Electrochemical characteristics of electrophoretically deposited nickel antimony oxide anode for lithium-ion rechargeable cells by Ray U., Das D., Jena S., Mitra A., Das K., Majumder S.B., Das S. Journal of Power Sources 594 234044- (2024)
Pseudo lamellae of Cu6Sn5 on the crystal facet of Sn in electrodeposited eutectic Sn-Cu lead-free solder by Mallik M., Das K., Ghosh R.N., Das S. Materials Today Communications 38 - (2024)
Electrodeposition process optimization by response surface methodologies to obtain high-corrosion resistant Znâ Ni coatings by Guerrero J.D.M., Satpathy B., Prasad P.S., Das S., Das K. Surface and Coatings Technology 479 - (2024)
Electrophoretic deposition of 58S bioactive glass polymer composite coatings on 316L stainless steel: An optimization for corrosion, bioactivity and cytocompatibility by Hadem H., Mitra A. , Ojha A. , Rajasekaran R. , Satpathy B. , Das D. , Mukherjee S. , Dhara S. , Das S. , Das K. ACS Applied Biomaterials - (2024)
Artificial Neural Network-based approach for prediction of nanomechanical properties of anodic coating on additively manufactured Al-10Si-Mg alloy by Ghosh R., Sahu B. , Dey A. , Thota H. , Das K. Modelling and Simulation in Materials Science and Engineering 32 - (2024)
Optimizing the quality of bioactive glass-polymer coatings through analysis of the effect of dispersing agents on zeta potential and suspension conductivity by Hadem H., Satpathy B. , Mitra A. , Das S. , Das K. Materials Letters 354 - (2024)
Mixed alkali effect on the mechanical, thermal and biological properties of 58S bioactive glass by Hadem H., Ojha A. K., Mitra A. , Rajasekaran R. , Dhara S. , Das S. , Das K. Ceramics International 15 31925-31936 (2024)
Study on local strain distribution and grain boundary characteristics of tensile-deformed TRIP-assisted medium manganese steel by Mohapatra S., Mandal A., Das S., Das K. Materials Science and Engineering: A 894 - (2024)
Study on strain distribution and texture evolution of Fe-0.18C-4Al-7Mn steel under different strain rate conditions by Mohapatra S., Das K., Das S. Materials Letters 354 - (2024)
CTAB-facilitated ex-situ synthesis of chitosan-based ZnO, CuO, and ZnO/CuO nanocomposites for improved optical emission by Mandal S., Basak S. , Kumar P. , Satpathy B. , Das S. , Das K. Optical Materials 155 - (2024)
Synergistic effect of bimodal structure and Cu-coated CNTs on the properties of Cu/CNTs composites by Mishra S., Mohapatra S., Mudliyar B.S., Das S., Das K. Journal of Alloys and Compounds 971 - (2024)
Multifaceted insights into Au coatings electrodeposited from a ChCl-EG based Deep Eutectic Solvent (DES): Unravelling the effect of surfactant polarity and current density on the morphology, mechanical properties, and anti-tarnishing efficacy by Satpathy B., Sau A. , Guerrere J. M., Das S. , Das K. Surfaces and Interfaces 49 - (2024)
Effect of Cetyl Trimethyl ammonium bromide (CTAB) amount on the Nanoindentation creep behaviour of Sn-cu-Y2O3 nanocomposite Lead-free solder by Mallik M., Ghosh R. N., Das S. , Das K. Materials Characterization 212 - (2024)
Biosurfactant-Assisted Cu Doping of Brushite Coatings: Enhancing Structural, Electrochemical, and Biofunctional Properties by Siva Prasad P., Byram P.K., Hazra C., Chakravorty N., Sen R., Das S., Das K. ACS Applied Materials and Interfaces 16 10601-10622 (2024)
Nanostructured metal oxide based coating for the protection and conservation of cultural heritage: A comprehensive review by Mandal S., Kumar P. , Satpathy B. , Das K. , Das S. Journal of Cultural Heritage 69 94-112 (2024)
Lipopeptide and glycolipid assisted growth of ZnO micro-/nano-structures: Evaluating the role of chemical and microbial green surfactant by Mandal S., Hazra C., Jena S., Kumar P., Sen R., Das S., Das K. Journal of Industrial and Engineering Chemistry 129 352-364 (2024)
Feasibility Insights of the Green-Assisted Calcium-Phosphate Coating on Biodegradable Zinc-Alloys for Biomedical Application: In Vitro and In Vivo Studies by Palai D., Dey A. , Prasad P. S., Roy T. , Mukherjee S. , Dhara S. , Das S. , Das K. ACS Applied Materials and Interfaces 16 24274-24294 (2024)
Surfactant-assisted synthesis of hydroxyapatite particles: a comprehensive review by Prasad P.S., Marupalli B.C.G., Das S., Das K. Journal of Materials Science 58 6076-6105 (2023)
Experimental and DFT investigations on the influence of cetrimonium bromide (CTAB) on surface morphology and anti-tarnishing performance of pulse galvanostatically deposited gold coatings from a cyanide-free electroplating solution by Satpathy B., Quraishy M. , Kundu T. K., Das S. , Das K. Surfaces and Interfaces 40 1-15 (2023)
A Comprehensive Study on the Effect of Annealing Temperature on the Tensile and Impact Behavior of Automotive-Grade Medium Manganese Steel (Fe-6.22Mn-0.18C) by Mohapatra S., G. , Satpathy B. , Das S. , Das K. J. of Materials Engineering and Performance - (2023)
Mechanical behavior and texture evolution of integrated MCNTs/Cu composites with balanced electrical/thermal conductivity by Mishra S., Jena S. , Mohapatra S. , Das S. , Das K. Powder Technology - (2023)
Controlled modulation of coating morphology, mechanical properties and anti-tarnishing response of nanocrystalline Au-Cu alloy coatings electrodeposited from a thiourea (TU)-based non-toxic cyanide-free bath: Effect of current density variation by Satpathy B., Kumari A. , Das K. , Das S. Materials Today Communications 37 - (2023)
The effect of milling time, and sintering temperature and time on the microstructure-property relationship of aluminium-matrix hybrid composites by Sethi J., Das S. , Das K. Materials Today Communications 35 - (2023)
Influence of intercritical annealing temperature on microstructure, microtexture, and tensile behavior of TRIP-assisted medium manganese steel by Mohapatra S., Mandal A. , Poojari G. , Das S. , Das K. Materialia 28 - (2023)
Effect of strain rate on the microstructure evolution and tensile behavior of medium manganese steel by Mohapatra S., Kumar S. , Das S. , Das K. Materials Letters 330 133243- (2023)
Effect of surfactant on the morphology and anti-tarnishing behaviour of Ag coatings electrodeposited from a novel cyanide-free thiosulphate-based electroplating bath by Satpathy B., Jena S. , Das S. , Das K. Colloids and Surfaces A: Physicochemical and Engineering Aspects 668 131443- (2023)
Theoretical and experimental studies of mirror-bright Au coatings deposited from a novel cyanide-free thiosulphate-based electroplating bath by Satpathy B., Jena S., Das S., Das K. Surface and Coatings Technology 453 - (2023)
Effect of surfactant on the morphology and anti-tarnishing behaviour of Ag coatings electrodeposited from a novel cyanide-free thiosulphate-based electroplating bath by Satpathy B., Jena S., Das S., Das K. Colloids and Surfaces A: Physicochemical and Engineering Aspects 668 - (2023)
Effect of Thermo Processing on the Microstructure, Impact Abrasion Wear, and Corrosion Resistance Properties of TiC Reinforced Al-Added High-Mn Steel Matrix Composite by Dalai R., Mohapatra S. , Das S. , Das K. JOM 75 5281-5289 (2023)
A systematic study on microstructure evolution, mechanical stability and the micro-mechanical response of tensile deformed medium manganese steel through interrupted tensile test by Mohapatra S., Poojari G., Marandi L., Das S., Das K. Materials Characterization 195 - (2023)
Innovative Electrodeposition of Bimetallic Cu Sn in a Stable Nonelectroactive Pyrophosphate-Based Bath: Reduction and Nucleation Growth Analysis by Kumar V., Nayak D. , Das K. , Das S. Journal of Physical Chemistry C, 127 20360-20371 (2023)
Insights into the dynamic impact behavior of intercritically annealed automotive-grade Fe 7Mn 4Al 0.18C steel by Mohapatra S., Poojari G. , Das S. , Das K. , Materials Science and Engineering A 887 - (2023)
Electrochemical study of intercritically annealed Fe-0.18C-7Mn-4Al steel by Mohapatra S., Palai D. , Satpathy B. , Das S. , Das K. Materials Today Communications 34 105282- (2023)
Electrochemical study of intercritically annealed Fe-0.18C-7Mn-4Al steel by Mohapatra S., Palai D., Satpathy B., Das S., Das K. Materials Today Communications 34 - (2023)
Pulse galvanostatic electrodeposition of biosurfactant assisted brushite-hydroxyapatite coatings on 316L stainless steel with enhanced electrochemical and biological properties by Prasad P., Hazra C. , Jena S. , Byram P. K., Sen R. , Chakravorty N. , Das S. , Das K. Colloids and Surfaces A: Physicochemical and Engineering Aspects 671 - (2023)
Development of Zn-2Cu-xMn/Mg Alloys for Orthopedic Applications: Mechanical Performance to In Vitro Degradation under Different Physiological Environments by Palai D., Prasad P. , Satpathy B. , Das S. , Das K. ACS Biomaterials Science and Engineering 9 - (2023)
Multiwalled carbon nanotubes coated with twin-strengthened copper by Mishra S., Jena S., Das S., Das K. Materials Chemistry and Physics 280 - (2022)
Development of flat absorber black anodic coating on 3D printed Al 10Si Mg alloy for spacecraft thermal control application by Ghosh R., Dey A., Kavitha M.K., Thota H.K., Rani R.U., Rajendra A., Das K. Ceramics International 48 35689-35697 (2022)
Nanoindentation responses of black anodic coating on additively manufactured Al 10Si Mg alloy by Ghosh R., Dey A., Kavitha M.K., Thota H.K., Dhan S., Rajendra A., Das K. Ceramics International 48 35883-35895 (2022)
Isothermal transformation kinetics, microstructure and mechanical properties of a carbide free bainitic steel by Mondal J., Das K. , Das S. Materials Characterization 177 - (2022)
The effect of microstructure and mechanical properties on the slurry erosion behavior of carbide-free bainitic and martensitic steel by Mondal J., Das K., Das S. Wear 504-505 - (2022)
A comprehensive review of various non-cyanide electroplating baths for the production of silver and gold coatings by Satpathy B., Jena S. , Das S. , Das K. International Materials Review 1-37 (2022)
Comparative Study of Slurry Erosion and Sliding Wear Properties of Quenched and Tempered Martensitic Steels by Mondal J., Das K., Das S. Journal of Materials Engineering and Performance - (2022)
A review on nanodispersed lead-free solders in electronics: synthesis, microstructure and intermetallic growth characteristics by Krupa Teja M. B., Sharma A. , Das S. , Das K. Journal of Materials Science 1-37 (2022)
Effect of annealing time on the microstructure and mechanical properties of aluminum added low-density medium manganese steel by Mohapatra S., Das K., Das S. Materials Letters 318 - (2022)
Structural and mechanical characterization of nano-structured Cu Ag bimetallic coatings developed from a novel thiourea-based electroplating bath by Satpathy B., Kayal N., Jena S., Das S., Das K. Materials Characterization 189 - (2022)
Synthesis and properties of Al-AlN-CuCNT and Al-Y2W3O12-CuCNT hybrid composites by Sethi J., Jena S., Das S., Das K. Materials Science and Engineering A 810 - (2021)
Influence of Copper on the Microstructural, Mechanical, and Biological Properties of Commercially Pure Zn-Based Alloys for a Potential Biodegradable Implant by Palai D., Roy T., Prasad P.S., Hazra C., Dhara S., Sen R., Das S., Das K. ACS Biomaterials Science and Engineering - (2021)
Electrophoretically deposited NiSb2O6-carbon black composite film as a potential anode for sodium-ion battery by Ray U., Das D., Jena S., Mitra A., Das K., Majumder S.B., Das S. Surface and Coatings Technology 408 - (2021)
In situ dual matrix composite with segregated microstructure fabricated from Al TiO2 B2O3 system by mechanical thermal process by Lakra S., Bandyopadhyay T.K., Das S., Das K. Journal of Alloys and Compounds 860 - (2021)
A comparative study of electrodeposition routes for obtaining silver coatings from a novel and environment-friendly thiosulphate-based cyanide-free electroplating bath by Satpathy B., Jena S., Das S., Das K. Surface and Coatings Technology 424 - (2021)
Cetrimonium bromide assisted formation of antimony alloy nanorods for use as an anode in lithium-ion and sodium-ion full-cells by Jena S., Mitra A., Das S., Das D., Das K., Majumder S.B., Das S. Applied Surface Science 542 - (2021)
Thermal conductivity of in-situ dual matrix aluminum composites with segregated morphology by Lakra S., Bandyopadhyay T.K., Das S., Das K. Materials Research Bulletin 144 - (2021)
Evaluating the influence of milling time,and sintering temperature and time on the microstructural changes and mechanical properties of Al-Y2W3O12-AlN hybrid composites by Sethi J., Das S., Das K. Powder Technology 377 244-256 (2021)
A strategy for designing low-cost, environment-friendly, high energy and power density sodium-ion full cells: Effect of extrinsic pseudocapacitance by Jena S., Mitra A., Das S., Das D., Agrawal S., Das K., Majumder S.B., Das S. Journal of Alloys and Compounds 854 - (2021)
Reciprocating Sliding Wear of Cu, Cu-SiC Functionally Graded Coating on Electrical Contact by Banthia S., Amid M. , Sengupta S. , Das S. , Das K. Journal of Materials Engineering and Performnace 29 3930-3940 (2020)
A Study on the Tribological Properties of Al-AlN-Y2W3O12 Hybrid Composites by Sethi J., Mohapatra S., Sethi A., Das S., Das K. Journal of Materials Engineering and Performance 29 5638-5654 (2020)
An investigation of mechanical property and sliding wear behaviour of 400Hv grade martensitic steels by Mondal J., Das K., Das S. Wear 458-459 - (2020)
An investigation of mechanical property and sliding wear behaviour of 400Hv grade martensitic steels by Mondal J., Das S. , Das K. Wear 458-459 - (2020)
Synthesis and characterization of in-situ (Al Al3Ti Al2O3)/Al dual matrix composite by Lakra S., Bandyopadhyay T.K., Das S., Das K. Journal of Alloys and Compounds 842 - (2020)
Pulse potentiostatic deposition of Fe[sbnd]Zn based intermetallic coatings and evaluation of its catalytic activity for hydrogen evolution reaction by Biswas S., Das S., Jena S., Mitra A., Das S., Das K. Surface and Coatings Technology 402 - (2020)
Cu, Cu-SiC functionally graded coating for protection against corrosion and wear by Banthia S., Sengupta S., Das S., Das K. Surface and Coatings Technology 374 833-844 (2019)
Cu,Cu-SiC functionally graded coating for protection against corrosion and wear by Banthia S., Sengupta S. , Das S. , Das K. Surface and Coating Technology 374 833-844 (2019)
Effect of thermo-mechanical processing on the low impact abrasion and low stress sliding wear resistance of austenitic high manganese steels by Dalai R., Das S., Das K. Wear 420-421 176-183 (2019)
Effect of thermo-mechanical processing on the low impact abrasion and low stress sliding wear resistance of austenitic high manganese steels by Dalai R., Das S. , Das K. Wear 420-421 176-183 (2019)
Study on thermal and mechanical properties of yttrium tungstate-aluminium nitride reinforced aluminium matrix hybrid composites by Sethi J., Das S., Das K. Journal of Alloys and Compounds 774 848-855 (2019)
Study on thermal and mechanical properties of yttrium tungstate-aluminium nitride reinforced aluminium matrix hybrid composites by Sethi J., Das S. , Das K. Journal of Alloys and Compounds 774 848-855 (2019)
Novel pulse potentiostatic deposition route for obtaining pure intermetallic Cu5Zn8-CuZn composite coating using glycerol-NaOH based electrolyte with advanced scratch resistance and anti-corrosive properties by Das S., Jena S. , Banthia S. , Mitra A. , Das S. , Das K. Journal of Alloys and Compounds 792 770-779 (2019)
Novel pulse potentiostatic electrodeposition route for obtaining pure intermetallic Cu5Zn8-CuZn composite coating using glycerol-NaOH based electrolyte with advanced scratch resistance and anti-corrosive properties by Das S., Jena S., Banthia S., Mitra A., Das S., Das K. Journal of Alloys and Compounds 792 770-779 (2019)
Electrodeposited functionally graded coating inhibits gram positive and gram negative bacteria by a lipid peroxidation mediated membrane damage mechanism by Banthia S., Hazra C. , Sen R. , Das S. , Das K. Materials Science and Engineering C 102 623-633 (2019)
Electrodeposited functionally graded coating inhibits Gram-positive and Gram-negative bacteria by a lipid peroxidation mediated membrane damage mechanism by Banthia S., Hazra C., Sen R., Das S., Das K. Materials Science and Engineering C 102 623-633 (2019)
Synthesis and characterization of novel Cu, Cu-SiC functionally graded coating by pulse reverse electrodeposition by Banthia S., Sengupta S., Das S., Das K. Applied Surface Science 467-468 567-579 (2019)
Synthesis and characterization of novel Cu, Cu-SiC functionally graded coating by pulse reverse electrodeposition by Banthia S., Sengupta S. , Das S. , Das K. Applied Surface Science 467-468 567-579 (2019)
Microstructure and property relationship of thermo mechanically processed Fe17Mn and Fe17Mn3Al steel by Dalai R., Das S. , Das K. International Journal of Minerals, Metallurgy and Materials 26 64-75 (2019)
Relationship between the microstructure and properties of thermomechanically processed Feâ 17Mn and Feâ 17Mnâ 3Al steels by Dalai R., Das S., Das K. International Journal of Minerals, Metallurgy and Materials 26 64-75 (2019)
Sandwich architecture of SneSnSb alloy nanoparticles and N-doped reduced graphene oxide sheets as a high rate capability anode for lithium-ion batteries by Jena S., Mitra A. , Patra A. , Sengupta S. , Das K. , Majumder S. B., Das S. Journal of Power Sources 401 165-174 (2018)
Sandwich architecture of SNSNSb alloy nanoparticles and N-doped reduced graphene oxide sheets as a high rate capability anode for lithium ion batteries by Jena S., Mitra A. , Patra A. , Sengupta S. , Das K. , Majumder S. B., Das S. Journal of Power Sources 401 165-174 (2018)
Comparison of Osteoconduction, cytocompatibility and corrosion protection performance of hydroxyapatite-calcium hydrogen phosphate composite coating synthesized in-situ through pulsed electro-deposition with varying amount of phase and crystallinity by Chakraborty R., Seesala V.S., Sengupta S., Dhara S., Saha P., Das K., Das S. Surfaces and Interfaces 10 1-10 (2018)
Comparison of Osteoconduction, cytocompatibility and corrosion protection performance of hydroxyapatite-calcium hydrogen phosphate composite coating synthesized in-situ through pulsed electro-deposition with varying amount of phase and crystallinity by Chakraborty R., Seesala V. S., Sengupta S. , Dhara S. , Saha P. , Das K. , Das S. Surfaces and Interfaces 10 1-10 (2018)
A study on the effect of electrodeposition parameters on the morphology of porous nickel electrodeposits by Sengupta S., Patra A. , Jena S. , Das K. , Das S. Metallurgical Transactions A 49 920-937 (2018)
A Study on the Effect of Electrodeposition Parameters on the Morphology of Porous Nickel Electrodeposits by Sengupta S., Patra A., Jena S., Das K., Das S. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 49 920-937 (2018)
Melt impregnation as a post processing treatment for performance enhancement in high capacity 3D microporous tin-copper-nickel intermetallic anode for Li-ion battery supported by electrodeposited nickel scaffold: A structural study by Sengupta S., Patra A., Mitra A., Jena S., Das K., Majumder S.B., Das S. Applied Surface Science 441 965-977 (2018)
Melt impregnation as a post processing treatment for performance enhancement in high capacity 3D microporous tin-copper-nickel intermetallic anode for Li-ion battery supported by electrodeposited nickel scaffold: A structural study by Sengupta S., Patra A. , Mitra A. , Jena S. , Das K. , Majumder S. B., Das S. Applied Surface Science 441 965-977 (2018)
Substrate effect on electrodeposited copper morphology and crystal shapes by Banthia S., Sengupta S., Mallik M., Das S., Das K. Surface Engineering 34 485-492 (2018)
Substrate Effect on Electrodeposited Copper Morphology and Crystal Shapes by Banthia S., Sengupta S. , Mallik M. , Das S. , Das K. Surface Engineering 34 485-492 (2018)
Effect of anodic passivation at high applied potential difference on the crystal shape and morphology of copper electrodeposits: Thermodynamics and kinetics of electrocrystallization by Mitra A., Mallik M. , Sengupta S. , Banthia S. , Das K. , Das S. Crystal Growth and Design 17 1539-1549 (2017)
Effect of different electrolytes on the microstructure, corrosion and whisker growth of pulse plated tin coatings by Sharma A., Das S. , Das K. Journal of Microelectronic Engineering 170 59-68 (2017)
MWCNT reinforced bone like calcium phosphate Hydroxyapatite composite coating developed through pulsed electrodeposition with varying amount of apatite phase and crystallinity to promote superior osteoconduction, cytocompatibility and corrosion protection performance compared to bare metallic implant surface by Chakrabirty R., Seesala V. S., Sen M. , Sengupta S. , Dhara S. , Saha P. , Das K. , Das S. Surface and Coatings Technology 325 496-514 (2017)
A Novel Multiphase Sn-Sb-Cu Alloy Electrodeposited on 3D Interconnected Microporous Cu Current Collector as Negative Electrode for Lithium Ion Battery by Sengupta S., Patra A. , Deo Y. , Das K. , Majumder S. B., Das S. Metallurgical and Materials Transactions E 4 51-59 (2017)
Investigation on lithium conversion behavior and degradation mechanisms in Tin based ternary component alloy anodes for lithium ion batteries by Sengupta S., Mitra A. , Dahiya P. P., Kumar A. , M. , Das K. , Majumder S. B., Das S. Journal of Alloys and Compounds 721 236-248 (2017)
3D microporous Sn-Sb-Ni alloy impregnated Ni foam as high-performance negative electrode for lithium-ion batteries by Sengupta S., Patra A. , Akhtar M. , Das K. , Majumder S. B., Das S. Journal of Alloys and Compounds 705 290-300 (2017)
Lead free Sn-Ce-O composite coating on Cu produced by pulse electrodeposition from an aqueous acidic sulphate electrolyte by Sharma A., Das K. , Das S. Journal of Electronic Materials 46 5855-5865 (2017)
Synergistic Effect of Peak Current Density and Nature of Surfactant on Microstructure, Mechanical and Electrochemical Properties of Pulsed Electrodeposited Ni-Co-SiC Nanocomposites by R D. P., Patra A. , Sengupta S. , Das S. , Das K. Journal of Alloys and Compounds 729 1093-1107 (2017)
Synthesis and characterization of MWCNT reinforced nano-crystalline copper coating from a highly basic bath through pulse electrodeposition by Chakraborty R., Sengupta S. , Das S. , Saha P. , Das K. Surfaces and Interfaces 9 28-35 (2017)
Synthesis and Properties of Pulse Electrodeposited Lead-Free Tin-Based Sn/ZrSiO4 Nanocomposite Coatings by Bhattacharya S., Sharma A. , Das S. , Das K. Metallurgical and Materials Transactions 47 1292-1312 (2016)
Characterization of microstructure and properties of Al-Al3Zr-Al2O3 composite by Mandal A., Das K. , Das S. Bulletin of Materials Science 39 913-924 (2016)
Synthesis of calcium hydrogen phosphate and hydroxyapatite coating on SS316 substrate through pulsed electrodeposition by Chakraborty R., Sengupta S. , Saha P. , Das K. , Das S. Materials Science and Engineering: C 69 875-883 (2016)
Synthesis of calcium hydrogen phosphate and hydroxyapatite coating on SS316 substrate through pulsed electrodeposition by Chakraborty R., Sengupta S. , Saha P. , Das K. , Das S. Materials Science and Engineering C 69 875-883 (2016)
Fabrication of Sn nanostructures by template assisted pulse electrodeposition by Sharma A., Bhattacharya S. , Das S. , Das K. Surface Engineering 32 378-384 (2016)
Electrochemical corrosion behavior of CeO2 nanoparticle reinforced Sn-Ag based lead free nanocomposite solders in 3.5 wt% NaCl bath by Sharma A., Das S. , Das K. Surface and Coatings Technology 261 235-243 (2015)
Corrosion behaviour of TiC and (Ti,W)C-reinforced Fe-17Mn and Fe-17Mn-3Al austenitic steel matrix in-situ composites by Srivastava A. K., Das K. , Toor S. K., Sugimoto K. Metallography, Microstructure, and Analysis 4 371-380 (2015)
Corrosion Behaviour of TiC-Reinforced Hadfield Manganese Austenitic Steel Matrix In-Situ Composites by Srivastava A., Das K. , Toor S. K. Open Journal of Metal 5 11-17 (2015)
Development of TiC reinforced austenitic manganese steel by Dalai R. P., Das S. , Das K. Canadian Metallurgical Quarterly 53 317-325 (2014)
Effect of Current Density on the Nucleation and Growth of Crystal Facets during Pulse Electrodeposition of Sn-Cu Lead Free Solder by Mallik M., Mitra A. , Sengupta S. , Das K. , Ghosh R. , Das S. Crystal Growth and Design 14 6542-6549 (2014)
A study on the effect of pulse electrodeposition parameters on the morphology of pure tin coatings by Sharma A., Bhattacharya S. , Das S. , Das K. Metallurgical and Materials Transactions A 45 4610-4622 (2014)
Synthesis and thermal behavior of Cu/Y2W3O12 composite by Das S., Das S. , Das K. Ceramics International 40 6465-6472 (2014)
Influence of current density on surface morphology and properties of pulse plated tin films from citrate electrolyte by Sharma A., Das S. , Das K. Applied Surface Science 290 373-380 (2014)
Effect of various additives on morphological and structural characteristics of pulse electrodeposited tin coatings from stannous sulphate electrolyte by Sharma A., Das K. , Fecht H. J., Das S. Applied Surface Science 314 516-522 (2014)
Multi-objective optimization in wire-electro-discharge machining of TiC reinforced composite through Neuro-Genetic technique by Saha P., Tarafdar D. , Pal S. K., Saha P. , Srivastava A. K., Das K. Applied Soft Computing 13 2065-2074 (2013)
Development of lead free pulse electrodeposited tin based composite solder coating reinforced with ex-situ cerium oxide nanoparticles by Sharma A., Bhattacharya S. , Das S. , Fecht H. J., Das K. Journal of alloys and Compounds 574 609-616 (2013)
Experimental investigation of the effect of working parameters on wire offset in wire electrical discharge machining of Hadfield manganese steel by Srivastava A. K., Pal S. K., Saha P. , Das K. J. of surface Engineered Materials and advanced Technology 3 295-302 (2013)
Low Temperature Synthesis of Negative Thermal Expansion Y2W3O12 by Das S., Das S. , Das K. Journal of materials Engineering and performance 22 3357-3362 (2013)
Fabrication of Sn-Ag/CeO2 Electro-Composite Solder by Pulse Electrodeposition by Sharma A., Bhattacharya S. , Das S. , Das K. Metallurgical and Materials Transactions 44 5587-5601 (2013)
Influence of current density on microstructure of pulse electrodeposited tin coatings by Sharma A., Bhattacharya S. , Sen R. , Reddy B. , Fecht H. J., Das K. , Das S. Materials Characterization 68 22-32 (2012)
Influence of duty cycle on the microstructure and microhardness of pulse electrodeposited Ni-CeO2 nanocomposite coating by Sen R., Das S. , Das K. materials Research Bulletin 47 478-485 (2012)
Influence of sodium saccharin on the microstructure of pulse electrodeposited Ni-CeO2 nanocomposite coating by Sen R., Das S. , Das K. J. of Nanoscience and Nanotechnology 12 7944-7949 (2012)
In-situ synthesis, microstructure and properties of TiC & (Ti,W)C-reinforced Fe-Mn-Al austenitic steel matrix composites by Srivastava A. K., Das K. Journal of Materials Engineering and performance 21 2438-2445 (2012)
Synthesis and properties of pulse electrodeposited Ni-CeO2 nanocomposite by Sen R., Das S. , Das K. Metallurgical and MaterialsTrasactions A 43 3809-3823 (2012)
Microstructural characterization of nano-sized ceria powders by X-Ray Diffraction analysis by Sen R., Das S. , Das K. Metallurgical and Materials Transactions A 42 1409-1417 (2011)
Effect of fuel-to-nitrate ratio on the powder characteristics of nanosized CeO2 synthesized by mixed fuel combustion method by Palneedi H., Mangam V. , Das S. , Das K. Journal of Alloys and Compounds 509 9912-9918 (2011)
Effect of stirring rate on the microstructure and microhardness of Ni-CeO2 nanocomposite coating and investigation of the corrosion property by Sen R., Das S. , Das K. Surface and Coating Technology 205 3847-3855 (2011)
The effect of bath temperature on the crystallite size and microstructure of Ni-CeO2 nanocomposite coating by Sen R., Das S. , Das K. Materials Characterization 62 257-262 (2011)
Combustion and ball milled synthesis of rare earth nano-sized ceria powder by Sen R., Das S. , Das K. Materials Science and Applications 2 416-420 (2011)
Aqueous combustion synthesis and characterization of Zirconia-Alumina nanocomposites by Kishan J., Mangam V. , Reddy B. , Das S. , Das K. Journal of Alloys and Compounds 490 631-636 (2010)
Friction and wear behavior of Cu-CeO2 nanocomposite coatings synthesized by pulsed electrodeposition by Mangam V., Bhattacharya S. , Das K. , Das S. Surface and Coatings Technology 205 801-805 (2010)
Mechanical Thermal Synthesis of In-situ Al based hybrid nanocomposites in Al-Ni-Ti-O system by Dilip J. S., Reddy B. , Das S. , Das K. Journal of Alloys and Compounds 490 103-109 (2010)
Structure and properties of electrocodeposited Cu-CeO2 nanocomposite thin films by Mangam V., Das K. , Das S. Materials Chemistry and Physics 120 631-635 (2010)
Effect of current density on microstructure and hardness of Ni-CeO2 nanocomposite coating synthesized by pulsed electrodeposition technique by Sen R., Das S. , Das K. J. of Nanoscience and Nanotechnology 10 8217-8226 (2010)
Effect of surfactant on the co-electrodeposition of the nano-sized ceria particle in the nickel matrix by Sen R., Bhattacharya S. , Das S. , Das K. Journal of Alloys and Compounds 489 650-658 (2010)
Synthesis and characterization of pulse co-electrodeposited nickel/ceria nanocomposites by Sen R., Sharma A. , Bhattacharya S. , Das S. , Das K. J. of Nanoscience and Nanotechnology 10 4998-5003 (2010)
Electrical resistivity measurement of micro/nano crystalline Ni and Ni-CeO2 nanocomposite coatings using four probe method by Sen R., Das S. , Das K. International Journal of Nanotechnology and Applications 4 207-212 (2010)
The abrasive wear resistance of TiC and (Ti,W)C reinforced austenitic high manganese steel matrix in-situ composite by Srivastava A. K., Das K. Tribology International 43 944-950 (2010)
Abrasive wear behavior of Al-4.5wt.%Cu/(Zircon sand+Silicon carbide) Hybrid Composite by Das S., Das K. , Das S. Journal of Composite Materials 43 2665-2672 (2009)
Al-Ti-C-Sr master alloy - A melt inoculant for simultaneous grain refinement and modification of hypoeutectic Al-Si alloys by Prasad Rao A. K., Das K. , Murty B. S., Chakraborty M. Journal of Alloys and Compounds 480 49-51 (2009)
A Study of Microstructure and Tribological Behaviour of Al-4.5% Cu/Al3Ti Composites by Das K., Narnaware L. K. Materials Characterization 60 808-816 (2009)
In-situ Al based bulk Nanocomposites by Solid-State Aluminothermic reaction in Al-Ti-O system by Dilip J. S., Reddy B. , Das S. , Das K. Journal of Alloys and Compounds 475 178-183 (2009)
In-situ synthesis and characterization of TiC-reinforced Hadfield austenitic manganese steel matrix composite by Srivastava A. K., Das K. ISIJ International 49 1372-1377 (2009)
Microstructural and mechanical characterization of in-situ TiC and (Ti,W)C-reinforced high manganese austenitic steel matrix composites by Srivastava A. K., Das K. Materials Science & Engineering A 516 1-6 (2009)
Modeling of wire-electro-discharge machining of TiC/Fe in-situ metal matrix composite using normalized RBFN with enhanced k-means clustering technique by Saha P., Tarafdar D. , Pal S. K., Saha P. , Srivastava A. K., Das K. The International Journal of Advanced Manufacturing Technology 43 107-116 (2009)
Modeling of wire-electro-discharge machining of TiC/Fe in-situ metal matrix composite using normalized RBFN with enhanced k-means clustering technique by Saha P., Tarafdar D. , Pal S. K., Saha P. , Srivastava A. K., Das K. Int. J. of Manufacturing Sci. and Technol. 43 107-116 (2009)
A study of precipitation and recrystallization behavior of aluminum alloy AA1235 by Roy R. K., Kar S. K., Das K. , Das S. Journal of Materials Science 41 1039-1045 (2006)
Microstructures and tensile properties of commertial purity aluminum alloy AA1235 under different annealing conditions by Roy R. K., Kar S. K., Das K. , Das S. Materials Letters 59 - (2005)

Patent

In situ aluminum based dual matrix composites with enhanced thermal conductivity by Das K., Lakra S. , Bandyopadhyay T. K., Das S. - (2024)
Porous nanostructured tin-antimony-copper based alloy electrodes as anode material for lithium batteries and methods thereof by Das S., Kumar A. , Sengupta S. , Mitra A. , Das K. - (2024)
Self-cleaning and Photodegradation Properties of Polyurethane based Tin Oxide Nanocomposite Coating by Kumar P., Mandal S. , Das K. , Sen R. , Das S. - (2024)
A formulation for silver electroplating by Das S., Das K. , Bandyopadhyay T. K., Satpathy B. , Jena S. - (2024)
A hybrid coating material composition for the control of biofouling in cultural heritage artefacts by Mandal S., Hazra C. , Kumar P. , Das K. , Sen R. , Das S. - (2024)
Electrolyte formulation for safe lithium-ion and post lithium-ion batteries, and process for manufacturing the same. by Das S., Majumder S. B., Das K. , Mitra A. - (2024)
A bath for cyanide-free gold electroplating by Das K., Das S. , Nayyar N. , Satpathy B. , Jena S. - (2022)
An electrolyte bath composition for whisker resistant tin plating on metal substrates (Application No. 1001/KOL/2013, Publication date: 06.03.2015, status: Awaiting examination) by Sharma A., Das S. , Das K. - (2015)
Porous nanostructured tin-antimony-copper based alloy electrodes as anode material for lithium ion batteries and methods thereof (Application No. 0613/KOL/2014) by Das S., Kumar A. , Sengupta S. , Mitra A. , Das K. - (2014)
A Process for the Production of Ferrous Based Composite Materials. No.233871, Granted by Das K., Bandyopadhyay T. K. - (2009)

Others

Corrigendum to Nanoindentation responses of black anodic coating on additively manufactured Al 10Si Mg alloy [Ceram. Int. 48 (2022) 35883 35895, (S0272884222032886), (10.1016/j.ceramint.2022.09.110)] by Ghosh R., Dey A., Kavitha M.K., Thota H.K., Dhan S., Rajendra A., Das K. Ceramics International 49 8646- (2023)

Book Chapter/Section

Pulse Electrodeposition of Lead Free Tin Based Composites for Microelectronic Packaging by Sharma A., Das K. , Das S. Electrodeposition of composite materials 253-274 (2016)
Pulse electroplating of ultrafine grained tin coating by Sharma A., Das K. , Das S. Electroplating of nanostructures 105-129 (2015)