No Record Found.

Journal
• Micromechanical behavior of BCC phases in TiTaNbZrMo and Ti5Ta35Nb20Zr20Mo20 refractory high entropy alloys for total joint replacement by Avula I., Singh Z., Mukherjee S., Roy M. Scripta Materialia 257 - (2025)
• Unraveling the effects of nano-grained microstructure on mechanical behavior, corrosion, and in vitro biocompatibility of 316L austenitic stainless steel by Surya Prakash N., Mandal S., Chakrabarti D., Roy M. Materials Chemistry and Physics 318 - (2024)
• Synergistic effects of Cr addition on surface characteristics and its implications on wear and in vitro biocompatibility of TiMoNbTaW alloys by Chavan A., Mandal S., Roy M. Intermetallics 165 - (2024)
• Synergistic Improvement of Antibacterial and Osteogenic Differentiation of Thermomechanically Processed Mg-Zr-Sr-Ce Alloy: Insights into the Role of Precipitate Evolution Supported by AIMD Simulation Study by Sahoo S.N., Mandal S., Adhikary T., Ramesh V.K., Mukherjee P., Aich S., Samanta I., Nandi S.K., Roy M. ACS Applied Bio Materials 7 2762-2780 (2024)
• Effect of phosphate post-treatment on corrosion behavior of cerium-based conversion coated Mg-4.0Y-4.0Zn-0.5Zr-0.2Ca (wt.%) alloys by Kamde M.A., Mahton Y., Kumar A., Prakash N.S., Roy M., Basu A., Saha P. Materials Chemistry and Physics 314 - (2024)
• Effect of Thermomechanical Processing Induced Retained Strain on In Vitro, In Vivo Biodegradation Response and Cytocompatibility of Mg Alloy by Bairagi D., Mandal S., Hoque S., Ghosh D., Nandi S.K., Mondal S., Roy M., Paliwal M., Mandal S. ACS Biomaterials Science and Engineering 10 6191-6209 (2024)
• Effects of multiscale porosity of decellularized platelet-rich fibrin-loaded zinc-doped magnesium phosphate scaffolds in bone regeneration by Rath P., Mandal S. , Das P. , Sahoo S. N., Mandal S. , Ghosh D. , Nandi S. K., Roy M. Journal of Materials Chemistry B - (2024)
• Effects of the multiscale porosity of decellularized platelet-rich fibrin-loaded zinc-doped magnesium phosphate scaffolds in bone regeneration by Rath P., Mandal S., Das P., Sahoo S.N., Mandal S., Ghosh D., Nandi S.K., Roy M. Journal of Materials Chemistry B 12 5869-5883 (2024)
• Enhanced in-vitro degradation resistance and cytocompatibility of a thermomechanically processed novel Mg alloy: Insights into the role of microstructural attributes by Bairagi D., Mandal S., Roy M., Paliwal M., Mandal S. Journal of Magnesium and Alloys 12 700-725 (2024)
• Functional medium entropy alloys for joint replacement: An atomistic perspective of material deformation and a correlation to wear, corrosion, and biocompatibility by Chavan A., Avula I., Sahoo S.N., Biswal S., Mandal S., Musthafa M., Roy S., Nandi S.K., Mukherjee S., Roy M. Acta Biomaterialia 187 451-470 (2024)
• Correlation of Microstructure and Corrosion Behavior of squeeze-cast Mg-4.0Y-4.0Zn-0.5Zr-0.2Ca (wt%) Alloys Constituting W and LPSO Secondary Phases by Kamde M.A., Mahton Y., Singh Y., Sahoo S.K., Ganguly S., Prakash N.S., Roy M., Mishra V., Sarkar S., Saha P. Metals and Materials International 30 3379-3401 (2024)
• Understanding the effects of carbon addition on mechanical and wear properties of TiMoNbZr alloy by Chavan A., Kanta Panda S., Roy M. Materials Letters 370 - (2024)
• Phase stability and mechanical properties of Ta enriched TiTaNbZrMo refractory high entropy alloys by Avula I., Chavan A., Mukherjee S., Roy M. Journal of Alloys and Compounds 989 - (2024)
• In vitro and in vivo assessment of decellularized platelet-rich fibrin-loaded strontium doped porous magnesium phosphate scaffolds in bone regeneration by Tarif C.M., Mandal S., Chakraborty B., Sarkar K., Mukherjee P., Roy M., Nandi S.K. Journal of the Mechanical Behavior of Biomedical Materials 138 - (2023)
• In vivo biocompatibility of SrO and MgO doped brushite cements by Nandi S. K., Roy M. , Bandyopadhyay A. , Bose S. Journal of Biomedical Materials Research Part B: Applied Biomaterials 111 - (2023)
• Recent Developments in Engineered Magnesium Scaffolds for Bone Tissue Engineering by Dutta S., Roy M. ACS Biomaterials Science and Engineering 9 3010-3031 (2023)
• Cobalt free refractory high entropy alloys for total joint arthroplasty: In-vitro wear, corrosion and cytocompatibility evaluation by Chavan A., Mandal S., Roy M. Journal of Alloys and Compounds 938 - (2023)
• Synergistic Effects of Cerium and Hot Forging on Biodegradation, Antibacterial Properties, and In Vivo Biocompatibility of Microalloyed Mg Zr Sr Alloys by Roy M., Sahoo S. N., Mandal S. , Khan R. , Dutta S. , Pal S. , Ghosh D. , Nandi S. K. ACS Biomaterials Science & Engineering 9 - (2023)
• Synergistic improvement of antibacterial, mechanical and degradation properties of Cu added Mg-Zn-Zr alloy by Mandal S., Nigamananda Sahoo S., Balla V.K., Das M., Roy M. Materials Letters 339 - (2023)
• Implication of nano-scale grain refinement on the passive film formation and corrosion response of AISI 301L steel with and without pre-existing martensite by Surya Prakash N., Mandal S., Mandal S., Chakrabarti D., Roy M. Materials Letters 336 - (2023)
• Implication of Nano-Scale Grain Refinement on the Passive Film Formation and Corrosion Response of AISI 301L Steel with and without Pre-Existing Martensite by Surya Prakash N., Mandal S. , Mandal S. , Chakrabarti D. , Roy M. Materials Letters 336 1-5 (2023)
• Controlled nano Cu precipitation through age treatment: A method to enhance the biodegradation, mechanical, antimicrobial properties and biocompatibility of Fe-20Mn-3Cu alloys by Mandal S., Vvngsv Kishore A. , Mandal S. , Bhar B. , Mandal B. B., Nandi S. K., Roy M. Acta Biomaterialia 168 650-669 (2023)
• Magnesium Phosphate Bioceramics for Bone Tissue Engineering by Bavya Devi K., Lalzawmliana V., Saidivya M., Kumar V., Roy M., Kumar Nandi S. Chemical Record 22 - (2022)
• In Vitro Degradation and In Vivo Biocompatibility of Strontium-Doped Magnesium Phosphate-Reinforced Magnesium Composites by Dutta S., Khan R., Prakash N.S., Gupta S., Ghosh D., Nandi S.K., Roy M. ACS Biomaterials Science and Engineering 8 4236-4248 (2022)
• In vivo osteogenesis of plasma sprayed ternary-ion doped hydroxyapatite coatings on Ti6Al4V for orthopaedic applications by Ratha I., Datta P., Chand Reger N., Das H., Balla V.K., Devi K.B., Roy M., Nandi S.K., Kundu B. Ceramics International 48 11475-11488 (2022)
• In vitro and in vivo degradability, biocompatibility and antimicrobial characteristics of Cu added iron-manganese alloy by Mandal S., Kishore V., Bose M., Nandi S.K., Roy M. Journal of Materials Science and Technology 84 159-172 (2021)
• Effect of cerium-based conversion coating on corrosion behavior of squeeze cast Mg-4 wt% Y alloy in 0.1 M NaCl solution by Kamde M.A., Mahton Y., Ohodnicki J., Roy M., Saha P. Surface and Coatings Technology 421 - (2021)
• Decellularized xenogenic cartilage extracellular matrix (ECM) scaffolds for the reconstruction of osteochondral defects in rabbits by Das P., Mishra R. , Devi B. K., Rajesh K. , Basak P. , Roy M. , Roy P. , Lahiri D. , Nandi S. K. Journal of Materials Chemistry B - (2021)
• Effects of multiscale porosity and pore interconnectivity on in vitro and in vivo degradation and biocompatibility of Fe Mn Cu scaffolds by Mandal S., Nandi S. K., Roy M. Journal of Materials Chemistry B 9 4340-4354 (2021)
• Microstructure, mechanical, in vitro corrosion and biocompatibility response study of as-cast and as-rolled Mg 5Zn 0.5Zr alloy by Jana A., Dutta S., Roy M., Aravind U., Das M., Balla V.K. MRS Advances - (2021)
• Effects of cerium addition on the corrosion resistance and biocompatibility of Mg-2Sr-1Zr Alloy by Dutta S., Mandal S., Gupta S., Roy M. Journal of Materials Research 35 3124-3135 (2020)
• Effects of Cerium Addition on the Corrosion Resistance and Biocompatibility of Mg-2Sr-1Zr Alloy by Dutta S., Mandal S. , Gupta S. , Roy M. Journal of Materials Research 35 (22) 3124-3135 (2020)
• Degradability and in Vivo Biocompatibility of Doped Magnesium Phosphate Bioceramic Scaffolds by Sarkar K., Rahaman M. , Agarwal S. , Bodhak S. , Haldar S. , Nandi S. K., Roy M. Materials Letters 259 126892- (2020)
• Mesoporous bioactive glasses for bone healing and biomolecules delivery by Lalzawmliana V., Anand A. , Roy M. , Kundu B. , Nandi S. K. Materials Science and Engineering: C 106 110180- (2020)
• In vivo performance analysis of silanized and coated nitinol wires in biological environment by Sinha S., Priyadarshani J. , Devi K. B., Kishore A. V., Das P. , Chanda A. , Das S. , Roy M. , Nandi S. K. Journal of Materials Research 35 1262-1270 (2020)
• Recent Developments in Magnesium Metal Matrix Composites for Biomedical Applications: A Review by Dutta S., Gupta S. , Roy M. ACS Biomaterials Science & Engineering - (2020)
• Mechanical and in vitro degradation behavior of magnesium-bioactive glass composites prepared by SPS for biomedical applications by Dutta S., Karuppasamy B. , Gupta S. , Kundu B. , Valla V. , Roy M. Journal of Biomedical Materials Research Part B: Applied Biomaterials 107(2) 352-365 (2019)
• Metallic ion doped tri-calcium phosphate ceramics: Effect of dynamic loading on in vivo bone regeneration by Samanta S. K., Devi B. K., Das P. , Mukherjee P. , Chanda A. , Roy M. , Nandi S. K. Journal of the mechanical behavior of biomedical materials 96 227-235 (2019)
• Quantitative Assessment of Degradation, Cytocompatibility, and in Vivo Bone Regeneration of Silicon-Incorporated Magnesium Phosphate Bioceramics by Kumar V., Sarkar K. , Devi K. B., Ghosh D. , Nandi S. K., Roy M. Journal of Materials Research 34 4024-4036 (2019)
• In Vitro Corrosion and Cytocompatibility Studies of Hot Press Sintered Magnesium-Bioactive Glass Composite by Dutta S., Devi B. K., Mandal S. , Mahato A. , Gupta S. , Kundu B. , Balla V. , Roy M. Materialia 5 100245-100254 (2019)
• Anomalous in Vitro and in Vivo Degradation of Magnesium Phosphate Bioceramics: Role of Zinc Addition by Sarkar K., Kumar V. , Devi B. K., Ghosh D. , Nandi S. K., Roy M. ACS Biomaterials Science and Engineering - (2019)
• Effects of Sr doping on biodegradation and bone regeneration of magnesium phosphate bioceramics by Sarkar K., Kumar V. , Devi B. K., Ghosh D. , Nandi S. K., Roy M. Materialia 5 100211- (2019)
• Potential of growth factor incorporated mesoporous bioactive glass for in vivo bone regeneration by Lalzawmliana V., Anand A. , Kumar V. , Das P. , Devi B. K., Mukherjee J. , Maji A. K., Kundu B. , Roy M. , Nandi S. K. Journal of the mechanical behavior of biomedical materials 91 182-192 (2019)
• Fe-Mn-Cu Alloy as Degradable Bio-Metal with Enhanced Antimicrobial Properties by Mandal S., Ummadi R. , Bose M. , Balla V. K., Roy M. Materials Letters 237 323-327 (2019)
• Magnesium Silicate Bioceramics for Bone Regeneration: A Review by Devi B. K., Nandi S. K., Roy M. Journal of the Indian Institute of Science 1-28 (2019)
• Development and characterization of acellular caprine choncal cartilage matrix for tissue engineering applications by Das P., Rajesh K. , V L. , Devi B. K., Basak P. , Lahiri D. , Kundu B. , Roy M. , Nandi S. K. Cartilage - (2019)
• Preparation and in vivo biocompatibility studies of different mesoporous bioactive glasses by Anand A., Lalzawmliana V. , Kumar V. , Das P. , Devi B. K., Maji A. K., Kundu B. , Roy M. , Nandi S. K. Journal of the mechanical behavior of biomedical materials 89 89-98 (2019)
• Synergistic effects of silicon/zinc doped brushite and silk scaffolding in augmenting the osteogenic and angiogenic potential of composite biomimetic bone grafts by Moses J. C., Dey M. , Devi B. K., Roy M. , Nandi S. K., Mandal B. B. ACS Biomaterials Science & Engineering 5 1462-1475 (2019)
• In Vitro Biodegradation and In Vivo Biocompatibility of Forsterite Bio-Ceramics: Effects of Strontium Substitution by Devi . K., Tripathy B. , Roy A. , Lee B. , Kumta P. N., Nandi S. K., Roy M. ACS Biomaterials Science and Engineering 5 530-543 (2018)
• In Vivo Biocompatibility of Zinc-Doped Magnesium Silicate Bio-Ceramics by Devi B. K., Tripathy B. , Kumta P. N., Nandi S. K., Roy M. ACS Biomaterials Science & Engineering 4 2126-2133 (2018)
• Effect of zinc oxide doping on in vitro degradation of magnesium silicate bioceramics by Devi B. K., Lee B. , Roy A. , Kumta P. N., Roy M. Materials Letters 207 100-103 (2017)
• Processing and degradation behavior of porous magnesium scaffold for biomedical applications by Dutta S., Devi B. K., Roy M. Advanced Powder Technology 28 3204-3212 (2017)
• Phase stability and biological property evaluation of plasma sprayed hydroxyapatite coatings for orthopedic and dental applications by Vahabzadeh S, Roy M, Bandyopadhyay A, Bose S Acta Biomaterialia 17 47-55 (2015)
• Effects of grain refinement on the biocorrosion and in vitro bioactivity of magnesium by P Saha, M Roy, MK Datta, B Lee, PN Kumta Materials Science and Engineering: C 57 294-303 (2015)
• Effects of silicon on osteoclast cell mediated degradation, in vivo osteogenesis and vasculogenesis of brushite cement by Vahabzadeh S, Roy M, Bose S Journal of Materials Chemistry B 3 (46) 8973-8982 (2015)
• Effects of Zinc and Strontium Substitution in Tricalcium Phosphate on Osteoclast Differentiation and Resorption by Roy M, Fielding G, Bandyopadhyay A and Bose S Biomaterials Science 1 74-82 (2013)
• Resorbable Tricalcium Phosphates for Bone Tissue Engineering: Influence of SrO Doping by DeVoe K, Banerjee S, Roy M, Bandyopadhyay A, Bose S Journal of the American Ceramic Society 95 3095-3012 (2012)
• Antibacterial and biological characteristics of plasma sprayed silver and strontium doped hydroxyapatite coatings by Fielding G, Roy M, Bandyopadhyay A, Bose S Acta Biomaterialia 8 144-152 (2012)
• Mechanical and in Vitro Anti-Bacterial and Biological Properties of Plasma Sprayed Silver Doped Hydroxyapatite Coatings by Roy M, Fielding G, Beyenal H, Bandyopadhyay A, Bose S ACS Applied Materials and Interfaces 4 1341-1349 (2012)
• Mechanical and In Vitro Biocompatibility of Brushite Cement Modified by Polyethylene Glycol by Roy M, DeVoe K, Bandyopadhyay A, Bose S Materials Science and Engineering: C 32 2145-2152 (2012)
• MgO Doped Tantalum Coating on Ti: Microstructural Study and Biocompatibility Evaluation by Roy M, Krishna BV, Bandyopadhyay A, Bose S ACS Applied Materials and Interfaces 4 577-580 (2012)
• Osteoclastogenesis and Osteoclastic Resorption of Tricalcium Phosphate: Effect of Strontium and Magnesium Doping by Roy M, and Bose S Journal of Biomedical Materials Research A 100A 2450-2461 (2012)
• Recent Advances in Bone Tissue Engineering by Bose S, Roy M, Bandyopadhyay A Trends in Biotechnology 30 546-554 (2012)
• pH Tunable Fluorescent Calcium Phosphate Nanocomposite for Sensing and Controlled Drug Delivery by Banerjee SS, Roy M, Bose S Advanced Biomaterials (Advanced Engineering Materials) 13[1-2] B10-B17 (2011)
• Compositionally graded hydroxyapatite/tricalcium phosphate coating on Ti by laser and induction plasma by Roy M, Krishna BV, Bandyopadhyay A, Bose S Acta Biomaterialia 7 866-873 (2011)
• Induction Plasma Sprayed Nano Hydroxyapatite Coatings on Titanium for Orthopaedic and Dental Implants by Roy M, Bandyopadhyay A, Bose S Surface and Coatings technology 205 2785-2792 (2011)
• Induction Plasma Sprayed Sr and Mg Doped Nano Hydroxyapatite Coatings by Roy M, Bandyopadhyay A, Bose S Journal of Biomedical Materials Research Part B: Applied Biomaterials 99B 258-265 (2011)
• Laser Surface Modification of Metallic Biomaterials by Bandyopadhyay A, Krishna BV, Roy M, Bose S Journal of the Minerals, Metals & Materials Society (JOM) 63[6] 94-99 (2011)
• Comparison of Tantalum and Hydroxyapatite Coatings on Titanium for Applications in Load Bearing Implants by Roy M, Krishna BV, Bandyopadhyay A, Bose S Advanced Biomaterials (Advanced Engineering Materials) 12[11] B637-B641 (2010)
• Bulk Processing of Hydroxyapatite Nanopowder Using Radio Frequency Induction Plasma by Roy M, Bandyopadhyay A, Bose S Journal of the American Ceramic Society 93[11] 3720-3725 (2010)
• In vitro antimicrobial and biological properties of laser assisted tricalcium phosphate coating on titanium for load bearing implant by Roy M, Bandyopadhyay A, Bose S Materials Science and Engineering: C 29[6] 1965-1968 (2009)
• Surface Modification of Titanium for Load-Bearing Applications by Bose S, Roy M, Das K, Bandyopadhyay A Journal of Materials Science: Materials in Medicine 20[S1] S19-S24 (2009)
• Laser Processing of Bioactive Tricalcium Phosphate Coating on Titanium for Load-Bearing Implants by Roy M, Krishna BV, Bandyopadhyay A, Bose S Acta Biomaterialia 4[2] 324-333 (2008)
• Laser Surface Modification of Electrophoretically Deposited Hydroxyapatite Coating on Titanium by Roy M, Bandyopadhyay A, Bose S Journal of the American Ceramic Society 91[11] 3517-3521 (2008)
Patent
• REFRACTORY METAL BASED MULTI-COMPONENT ALLOY FOR ARTICULATING SURFACES IN TOTAL JOINT ARTHROPLASTY by A., Roy M. - (2024)
• BIODEGRADABLE IRON BASED ALLOY FOR FRACTURE FIXATION DEVICES WITH IMPROVED ANTIBACTERIAL ACTIVITY by Mandal S., Roy M. - (2024)
Others
• Correction to: Microstructure, mechanical, in vitro corrosion and biocompatibility response study of as-cast and as-rolled Mg 5Zn 0.5Zr alloy (MRS Advances, (2021), 6, 18, (472-476), 10.1557/s43580-021-00056-7) by Jana A., Dutta S., Roy M., Aravind U., Das M., Balla V.K. MRS Advances - (2022)
Book Chapter/Section
• Ceramics in Bone Grafts and Coated Implants by Roy M., Bandyopadhyay A. , Bose S. Materials and Devices for Bone Disorders 265-314 (2016)
• Characterization of Biomaterials by Roy M, Bandyopadhyay A and Bose S Mechanical Properties of Coatings on Medical Implants - (2013)
• Influences of Sr, Zn and Mg Dopants on Osteoclast Differentiation and Resorption by Roy M, Fielding G, Bandyopadhyay A, Bose S Ceramic transactions, Biomaterials Science: Processing, Properties, and Applications 227-237 (2012)
• Nanoscale Hydroxyapatite Coatings on Ti: Simultaneous Enhancement of Mechanical and Biological Properties by Roy M, Bandyopadhyay A, Bose S Ceramic transactions, Biomaterials Science: Processing, Properties, and Applications 147-158 (2011)

Principal Investigator

• Magnesium as degradable biomaterial: processing and bio - degradation mechanism evaluation
• Development of Magnesium Bioceramic for osteoporotic Bone Tissue Engineering
• Development and Commercialization of Degradable Metallic Internal Fracture Fixation Devices
• Development of CNT-reinforced Alumina Composite for Wear Resistant Applications
• Development of Polypyrrole Coated Mg Alloys for Degradable Fracture Fixation Devices

Co-Principal Investigator

• Novel functionally graded alumina-zirconia composites with optimum aging behavior and mechanical properties for biomedical implant applications
• Novel functionally graded alumina-zirconia composites with optimum aging behavior and mechanical properties for biomedical implant applications
• Setting Up High-End Testing Facilities of Materials for Biomaterials, Aerospace and Automotive Applications (SGDRI-2015)
• Technology Development and Demonstration for Stanag Level 3/4 Rated Composite Integral Armour for Infantry Fighting Vehicles (IFVs)