Indian Institute of Technology Kharagpur |

Journal

Effect of Y2O3 and Graphite on the Microstructure, Mechanical Properties, and Wear Resistance of Al2O3 B4C Composites by Nazeer M., Bapanapalle C.O., Pillari L.K., Mandal N., Bichler L., Laha T., Roy S. Journal of the American Ceramic Society 109 - (2026)
Insight into the micro-mechanisms of wear in oxide dispersion strengthened Ni-rich high entropy alloy by Sabat M., Faridi M.A., Maharana S., Prasad D.K.V.D., Laha T. Tribology International 214 - (2026)
Deciphering the role of stacking fault energy on TWIP TRIP interplay in Ni-rich high entropy alloy with tailored Ti content by Maharana S., Biswal S., Sabat M., Prasad D.K.V.D., Laha T. International Journal of Plasticity 199 - (2026)
Unravelling the deformation mechanisms in Ni-rich high entropy alloy with tailored Ti content: An experimental and atomistic approach by Maharana S., Biswal S., Sabat M., Prasad D.K.V.D., Laha T. International Journal of Plasticity 189 - (2025)
A comparative study of structural, mechanical, and thermal shock properties in ZrB2-B4C-SiC-LaB6 functionally graded and non-graded composites by Naik A.K., Kallien G., Schell G., Patel M., Laha T., Roy S. Journal of Alloys and Compounds 1036 - (2025)
Influence of B4C content and particle size on the mechanical properties of Al2O3-B4C composites by Nazeer M., Naik A. K., Prasad D. K., Pillari L. K., Bichler L. , Laha T. , Roy S. International Journal of Applied Ceramic Technology 15067- (2025)
Influence of in situ crystallisation on tribological and corrosion properties of Fe-based amorphous coatings synthesised by high velocity oxyfuel spraying by Rout A., Faridi M.A., Nayak S.K., Laha T. Philosophical Magazine Letters 105 - (2025)
Optimization of wetting behavior in plasma-sprayed Fe-based amorphous/crystalline coatings resulting improved corrosion inhibition ability by Halder S., Faridi M.A., Rout A., Nayak S.K., Panda I., Laha T. Surface and Coatings Technology 495 - (2025)
Oxide dispersion strengthened Ni-rich high entropy alloy synthesized via mechanical alloying and spark plasma sintering: Attribution of nano-Y2O3 dispersoid on mechanical properties by Sabat M., Maharana S., Prasad D.K.V.D., Sarkar R., Laha T. Materials Science and Engineering: A 942 - (2025)
Analysis of viscous flow mechanism from the standpoint of consolidation pressure and heating rate during consolidation of an Fe-based metallic glass powder via spark plasma sintering by Prasad D.K.V.D., Maharana S., Laha T. Journal of Alloys and Compounds 1041 - (2025)
Development of macroporous silicone rubber composites by internal emulsion templating for acoustic applications by Kumar A., Seelaboyina R., Jana S., Laha T., Keshri A.K. Journal of Polymer Research 31 1-13 (2024)
Development of single-phase Ni-rich high entropy alloy with excellent strength-ductility synergy from blended elemental powder synthesized via spark plasma sintering by Maharana S., Sabat M., Prasad D.K.V.D., Laha T. Materials Science and Engineering: A 913 - (2024)
Evolution of Wear Mechanism Under Different Sliding Conditions of an Fe-Based Amorphous Coating Synthesized by Plasma Spraying by Faridi M.A., Nayak S.K., Prasad D.K.V.D., Mustafa S.E., Babu D.A., Murthy J.K.N., Laha T. Journal of Thermal Spray Technology 33 2593-2610 (2024)
Exceptional Low Temperature Fabrication of Self-Passivating Tungsten Alloys by Mechanical Alloying and Spark Plasma Sintering by Suman V., Maurya R.S., Laha T., Chaira D. Journal of Materials Engineering and Performance - (2024)
A comparative assessment of thermal conductivity of functionally graded and equivalent non-graded ZrB2 B4C SiC LaB6 ultra-high-temperature ceramic composites by Naik A.K., Pillari L.K., Lessoway K., Bichler L., Laha T., Roy S. Open Ceramics 19 - (2024)
Effect of graded microstructure on the modulus, hardness, and strength of hot-pressed ZrB2-B4C FGM by Naik A.K., Pillari L.K., Patel M., Bichler L., Laha T., Roy S. Journal of Materials Science 59 8682-8705 (2024)
Oxidative wear assisted enhanced wear performance of spark plasma sintered in situ Fe-based bulk metallic glass composites by Prasad D.K.V.D., Faridi M.A., Bysakh S., Laha T. Wear 556-557 - (2024)
Study of the influence of ZrB2 content and thermal shock on the elastic modulus of spark plasma sintered ZrB2-B4C composites using a non-destructive ultrasonic technique by Naik A. K., Maharana S. , Bichler L. , Laha T. , Roy S. Journal of the European ceramic Society 44 679-692 (2024)
Advances in Synthesis and Characterization of Aluminum-Based Amorphous Alloys: A Review by Sahu A., Maurya R.S., Laha T. Advanced Engineering Materials 26 2301150- (2024)
Effect of Microstructure and Phase Evolution on the Wear Behavior of Fe-Based Amorphous/Nanocrystalline Composite Coatings Synthesized by Plasma Spraying by Faridi M., Nayak S. K., Prasad D. , Kumar A. , Laha T. Journal of Thermal Spray Technology 32 2054-2067 (2023)
Effect of sintering parameters on phase evolution, microstructural development and mechanical behavior of Ni46Al12Co18Cr8Fe12Mo4 high entropy alloy synthesized via mechanical alloying and spark plasma sintering by Maharana S., Prasad . , Seetharaman . , Sabat . , Laha T. Materials Science and Engineering: A 886 145695- (2023)
Fe-based metallic glass coatings by thermal spraying: a focused review on corrosion properties and related degradation mechanisms by Nayak S. K., Kumar A. , Laha T. International Materials Reviews 68 404-485 (2023)
Deformation behavior of plasma sprayed Fe-based amorphous/ nanocrystalline coating under multi-scale tribological contact by Kumar A., Nayak S. , Laha T. Journal of Non-Crystalline Solids 609 122281- (2023)
Innovative powder-based wettability evaluation of HfB2-ZrB2-SiC-B4C-CNT composite: Effect of surface roughness and ambient conditions by Bajpai S., Singh . P., Bhadauria A. , Venkateswaran . , Laha T. , Upadhyaya A. , Balani K. Surfaces and Interfaces 42 103345- (2023)
In situ processing of Fe-based bulk metallic glass nanocomposites in supercooled liquid region by spark plasma sintering by Prasad D., Kumar I. , Bysakh S. , Laha T. Journal of Non-Crystalline Solids 607 122231- (2023)
Evaluation of room temperature creep deformation of in situ Fe-based bulk metallic glass nanocomposites by instrumented indentation by Prasad D., Kumar I. , Nayak S. K., Maharana S. , Bysakh S. , Laha T. Intermetallics 161 107972- (2023)
Review on development of functionally graded composite materials by Sai C. M., Ajit N. K., Navya K. , Laha T. , Roy S. International Materials Reviews - (2022)
Review on development of metal/ceramic interpenetrating phase composites and critical analysis of their properties by Kota N., Charan M. S., Laha T. , Roy S. Ceramics International 48 1451-1483 (2022)
Development of functionally graded ZrB2 B4C composites for lightweight ultrahigh-temperature aerospace applications by Naik A. K., Nazeer M. , Prasad D. , Laha T. , Roy S. Ceramics International 48 33332-33339 (2022)
Development of functionally graded ZrB2 B4C composites for lightweight ultrahigh-temperature aerospace applications by Naik A.K., Nazeer M., Prasad D.K.V.D., Laha T., Roy S. Ceramics International 48 33332-33339 (2022)
Comparative Study on Wear and Corrosion Behavior of Plasma Sprayed Fe73Cr2Si11B11C3 and Fe63Cr9P5B16C7 Metallic Glass Composite Coatings by Kumar A., Nayak S.K., Laha T. Journal of Thermal Spray Technology 31 1302-1316 (2022)
Fe-based metallic glass composite coatings by HVOF spraying: Influence of Mo on phase evolution, wear and corrosion resistance by Nayak S.K., Faridi M.A., M G., Kumar A., Laha T. Materials Characterization 191 - (2022)
Ultrasonic study of the elastic properties of functionally graded and equivalent monolithic composites by Nazeer M., Jana P., Oza M.J., Schell K.G., Bucharsky E.C., Laha T., Roy S. Materials Letters 323 - (2022)
Study of the elastic properties and thermal shock behavior of Al-SiC-graphite hybrid composites fabricated by spark plasma sintering by Jana P., Oza M. J., Schell K. G., Bucharsky E. C., Laha T. , Roy S. Ceramics International 48 5386-5396 (2022)
Corrosion behaviour of plasma sprayed Fe based metallic glass (Fe73Cr2Si11B11C3 (at%) coatings in 3.5% NaCl solution by Bijlawan P., Singh C. , Kumar A. , Sarkar K. , Rani N. , Laha T. , Banerjee A. , Mondal K. Journal of Non-Crystalline Solids 567 - (2021)
Corrosion behaviour of plasma sprayed Fe based metallic glass (Fe73Cr2Si11B11C3 (at%) coatings in 3.5% NaCl solution by Bijalwan P., Singh C., Kumar A., Sarkar K., Rani N., Laha T., Banerjee A., Mondal K. Journal of Non-Crystalline Solids 567 - (2021)
Analyzing the Effects of Milling and Sintering Parameters on Crystalline Phase Evolution and Mechanical Properties of Al86Ni8Y6 and Al86Ni6Y4.5Co2La1.5 Amorphous Ribbons by Sahu A., Maurya R.S., Singh L.K., Laha T. Acta Metallurgica Sinica (English Letters) - (2021)
Effect of thermomechanical treatment on the microstructure and mechanical properties of Si-containing oxide dispersion strengthened reduced activation ferritic steel synthesized via mechanical alloying and spark plasma sintering by Ilaham W.R., Singh L.K., Kumar A., Laha T. Nuclear Materials and Energy 28 - (2021)
Understanding the effect of bimodal microstructure on the strength ductility synergy of Al CNT nanocomposites by Singh L.K., Bhadauria A., Laha T. Journal of Materials Science 56 1730-1748 (2021)
Developing a hybrid Al-SiC-graphite functionally graded composite material for optimum composition and mechanical properties by Oza M. J., Schell K. G., Bucharsky E. C., Laha T. , Roy S. Materials Science and Engineering A 805 140625- (2021)
Developing an Economical Wear and Corrosion Resistant Fe-Based Metallic Glass Composite Coating by Plasma and HVOF Spraying by Nayak S.K., Kumar A., Laha T. Journal of Thermal Spray Technology - (2021)
Multi-scale indentation creep behavior in Fe-based amorphous/nanocrystalline coating at room temperature by Kumar A., Nayak S.K., Banerjee A., Laha T. Materials Letters 283 - (2021)
Tensile deformation behavior and strengthening mechanism in graphene nanoplatelet reinforced bimodal grained aluminum nanocomposite synthesized by spark plasma sintering and hot rolling by Bhadauria A., Singh L.K., Nayak S.K., Laha T. Materials Characterization 168 - (2020)
Investigation of nano- and micro-scale structural evolution and resulting corrosion resistance in plasma sprayed Fe-based (Fe-Cr-B-C-P) amorphous coatings by Kumar A., Nayak S.K., Sarkar K., Banerjee A., Mondal K., Laha T. Surface and Coatings Technology 397 - (2020)
Investigation of nanomechanical deformation behavior in plasma sprayed Fe-based amorphous/ nanocrystalline composite coating via multi-scale indentation and nanotribology by Kumar A., Nayak S.K., Pathak A., Banerjee A., Laha T. Journal of Non-Crystalline Solids 545 - (2020)
Multi-scale mechanical properties of Fe-based amorphous/nanocrystalline composite coating synthesized by HVOF spraying by Nayak S.K., Kumar A., Pathak A., Banerjee A., Laha T. Journal of Alloys and Compounds 825 - (2020)
Nanoindentation study on Al86Ni8Y6 glassy alloy synthesized via mechanical alloying and spark plasma sintering by Maurya R.S., Sahu A., Laha T. International Journal of Materials Research 111 160-167 (2020)
Phase Evolution-Dependent Nanomechanical Properties of Al86Ni8Y6 and Al86Ni6Y4.5Co2La1.5 Spark Plasma-Sintered Bulk Amorphous Composites by Sahu A., Maurya R.S., Dinda S., Laha T. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 51 5110-5119 (2020)
Non-isothermal crystallization behavior of Al86Ni8Y6 and Al86Ni6Y4. 5Co2La1. 5 melt-spun ribbons, milled ribbon particles and bulk samples consolidated by spark plasma sintering by Sahu A., Sajeevan Maurya R., Laha T. Thermochimica Acta 684 - (2020)
Mechanistic insight into the role of amorphicity and porosity on determining the corrosion mitigation behavior of Fe-based amorphous/nanocrystalline coating by Nayak S.K., Kumar A., Sarkar K., Banerjee A., Laha T. Journal of Alloys and Compounds 849 - (2020)
Microstructure and corrosion behavior of Fe-based amorphous composite coatings developed by atmospheric plasma spraying by Bijalwan P., Kumar A., Nayak S.K., Banerjee A., Dutta M., Laha T. Journal of Alloys and Compounds 796 47-54 (2019)
Optimization of mechanical and corrosion properties of plasma sprayed low-chromium containing Fe-based amorphous/nanocrystalline composite coating by Kumar A., Nayak S.K., Bijalwan P., Dutta M., Banerjee A., Laha T. Surface and Coatings Technology 370 255-268 (2019)
The Glassy Structure Formation and Phase Evolution in Mechanically Alloyed and Spark Plasma-Sintered Al-TM-RE Alloys by Maurya R.S., Laha T. Journal of Materials Engineering and Performance 28 7407-7418 (2019)
Spark plasma sintered Al-0.5â ¯wt% MWCNT nanocomposite: Effect of sintering pressure on the densification behavior and multi-scale mechanical properties by Singh L.K., Bhadauria A., Oraon A., Laha T. Diamond and Related Materials 91 144-155 (2019)
Investigation of high-temperature oxidation behavior of silicon added 14Cr nanostructured ferritic alloys synthesized via mechanical alloying and spark plasma sintering by Ilaham W.R., Maurya R.S., Laha T. Materials Research Express 6 - (2019)
3D-Enhanced, High-Performing, Super-hydrophobic and Electromagnetic-Interference Shielding Fabrics Based on Silver Paint and Their Use in Antibacterial Applications by Ghosh S., Das P., Ganguly S., Remanan S., Das T.K., Bhattacharyya S.K., Baral J., Das A.K., Laha T., Das N.C. ChemistrySelect 4 11748-11754 (2019)
Effect of Si addition on the microstructure and mechanical property of nanostructured oxide dispersion strengthened ferritic steel synthesized via mechanical alloying and spark plasma sintering by Ilaham W.R., Singh L.K., Laha T. Fusion Engineering and Design 138 303-312 (2019)
Effect of sintering temperature on phase evolution of Al 86 Ni 6 Y 4.5 Co 2 La 1.5 bulk amorphous composites synthesized via mechanical alloying and spark plasma sintering by Sahu A., Maurya R.S., Laha T. Progress in Natural Science: Materials International 29 32-40 (2019)
Nanoindentation and nanoscratch properties of graphene nanoplatelets reinforced spark plasma sintered aluminium-based nanocomposite by Bhadauria A., Singh L.K., Laha T. Advances in Materials and Processing Technologies 5 295-302 (2019)
Fe-based amorphous/nanocrystalline composite coating by plasma spraying: Effect of heat input on morphology, phase evolution and mechanical properties by Kumar A., Kumar R., Bijalwan P., Dutta M., Banerjee A., Laha T. Journal of Alloys and Compounds 771 827-837 (2019)
Al-MWCNT nanocomposite synthesized via spark plasma sintering: Effect of powder milling and reinforcement addition on sintering kinetics and mechanical properties by Singh L.K., Bhadauria A., Laha T. Journal of Materials Research and Technology 8 503-512 (2019)
Combined strengthening effect of nanocrystalline matrix and graphene nanoplatelet reinforcement on the mechanical properties of spark plasma sintered aluminum based nanocomposites by Bhadauria A., Singh L.K., Laha T. Materials Science and Engineering A 749 14-26 (2019)
Mechanical and corrosion properties of plasma-sprayed Fe-based amorphous/nanocrystalline composite coating by Kumar A., Nayak S.K., Bijalwan P., Dutta M., Banerjee A., Laha T. Advances in Materials and Processing Technologies 5 371-377 (2019)
Comparative study on sintering behavior of Al 86 Ni 6 Y 4.5 Co 2 La 1.5 mechanically alloyed amorphous powder and melt-spun ribbon by Sahu A., Maurya R.S., Laha T. Advanced Powder Technology 30 691-699 (2019)
Comparing the strengthening efficiency of multiwalled carbon nanotubes and graphene nanoplatelets in aluminum matrix by Singh L.K., Bhadauria A., Laha T. Powder Technology 356 1059-1076 (2019)
A Study on the Corrosion Inhibition of Fe-Based Amorphous/Nanocrystalline Coating Synthesized by High-Velocity Oxy-Fuel Spraying in an Extreme Environment by Nayak S.K., Kumar A., Sarkar K., Pathak A., Banerjee A., Laha T. Journal of Thermal Spray Technology 28 1433-1447 (2019)
Effect of physio-chemically functionalized graphene nanoplatelet reinforcement on tensile properties of aluminum nanocomposite synthesized via spark plasma sintering by Bhadauria A., Singh L.K., Laha T. Journal of Alloys and Compounds 748 783-793 (2018)
Effect of Sintering Temperature and Heating Rate on Crystallite Size, Densification Behaviour and Mechanical Properties of Al-MWCNT Nanocomposite Consolidated via Spark Plasma Sintering by Singh L., Bhadauria A. , Jana S. , Laha T. Acta Metallurgica Sinica 31 1019-1030 (2018)
Effect of Sintering Temperature and Heating Rate on Crystallite Size, Densification Behaviour and Mechanical Properties of Al-MWCNT Nanocomposite Consolidated via Spark Plasma Sintering by Singh L.K., Bhadauria A., Jana S., Laha T. Acta Metallurgica Sinica (English Letters) 31 1019-1030 (2018)
Synergistic effect of hybrid carbon nanotube and graphene nanoplatelets reinforcement on processing, microstructure, interfacial stress and mechanical properties of Al2O3 nanocomposites by Asiq Rahman O.S., Sribalaji M., Mukherjee B., Laha T., Keshri A.K. Ceramics International 44 2109-2122 (2018)
Multi-scale tribological and nanomechanical behavior of cold sprayed Ti2AlC MAX phase coating by Loganathan A., Sahu A., Rudolf C., Zhang C., Rengifo S., Laha T., Boesl B., Agarwal A. Surface and Coatings Technology 334 384-393 (2018)
Evaluation of thermal, fracture and high temperature behavior of mechanically alloyed and spark plasma sintered nano-Y2O3 dispersed W-Ni-Mo and W-Ni-Ti-Nb alloys by Patra A., Karak S. , Saxena R. , Sahoo R. , Laha T. Materials Performance & Characterization 7 515-531 (2018)
Exhibition of veiled features in diffusion bonding of titanium alloy and stainless steel via copper by Thirunavukarasu G., Kundu S., Laha T., Roy D., Chatterjee S. Metallurgical Research and Technology 115 - (2018)
Effect of graphene reinforcement on the mechanical properties of Ti2AlC ceramic fabricated by spark plasma sintering by Thomas T., Zhang C., Sahu A., Nautiyal P., Loganathan A., Laha T., Boesl B., Agarwal A. Materials Science and Engineering A 728 45-53 (2018)
Microstructural development of prior nickel coated hot dipped galvanised coatings by Chakraborty A., Govardhana P. , Mondal A. , Dutta M. , Singh S. B., Laha T. Journal of Alloys and Compounds 699 648-656 (2017)
Fabrication and characterization of nano-Y2O3 dispersed W-Ni-Mo and W-Ni-Ti-Nb alloys by mechanical alloying and spark plasma sintering by Patra A., Saxena R. , Karak S. K., Laha T. , Sahu S. K. Journal of Alloys and Compounds 707 245-250 (2017)
Nanocomposite Reinforced with Physically Functionalized Carbon Nanotubes Synthesized via Spark Plasma Sintering by Sribalaji M., Asiq Rahman O. S., Laha T. , Keshri A. K. Materials Chemistry and Physics 177 220-228 (2016)
Quantitative phase analysis in Al86Ni8Y6 bulk glassy alloy synthesized by consolidating mechanical alloyed amorphous powder via spark plasma sintering by Maurya R. S., Sahu A. , Laha T. Materials & Design 93 96-103 (2016)
Microstructure and phase evolution in spark-plasma-sintered Al86Ni6Y4.5Co2La1.5 glassy alloy by Maurya R. S., Laha T. Philosophical Magazine Letters 453 1-7 (2016)

Book Chapter/Section

Processing Techniques and Applications of Advanced Bulk Functionally Graded Materials (FGMs) by Naik A. K., Laha T. , Roy S. Advanced Smart and Multifunctional Materials Volume 2: Advanced Processing, Polymers, Ceramics, and Related Functional Materials 43-76 (2025)

Conferences

Evaluation of Corrosion Behavior of Plasma Sprayed Low Cr Containing Fe-based (Fe73Cr2Si11B11C3) Amorphous-Crystalline Coating by Nakhate R.K., Rohilla G., Faridi M.A., Agasti A.V., Laha T., Kumar A. Procedia Structural Integrity 71 357-363 (2025)
Development and Characterization of Lightweight ZrB2â B4C Functionally Graded Composites by Naik A.K., Prasad D.K.V.D., Laha T., Roy S. Minerals, Metals and Materials Series 522-529 (2024)
Development and Characterization of Lightweight ZrB2 B4C Functionally Graded Composites by Naik A. K., Prasad D. K., Laha T. , Roy S. TMS 2024 522-529 (2024)
Corrosion behavior of Fe-based amorphous/nanocrystalline composite coating: correlating the influence of porosity and amorphicity by Nayak S., Kumar A. , Sarkar K. , Banerjee A. , Laha T. 1st Corrosion and Materials Degradation Web Conference - (2021)
Nanoscratch and electrochemical behavior of plasma sprayed Fe-based amorphous / nanocrystalline coating by Kumar A., Nayak S. K., Bijalwan P. , Banerjee A. , Laha T. Materials Science and Technology (MS&T) 2019 341-347 (2019)
Nanoscratch and electrochemical behavior of plasma sprayed Fe-based amorphous/nanocrystalline coating by Kumar A., Nayak S.K., Bijalwan P., Banerjee A., Laha T. MS and T 2019 - Materials Science and Technology 2019 341-347 (2019)
Electrochemical corrosion behavior of Fe based amorphous / nanocrystalline composite coating prepared by high velocity oxy-fuel thermal spraying by Nayak S.K., Kumar A., Sarkar K., Pathak A., Banerjee A., Laha T. MS and T 2019 - Materials Science and Technology 2019 348-355 (2019)
Electrochemical corrosion behavior of Fe based amorphous / nanocrystalline composite coating prepared by high velocity oxy-fuel thermal spraying by Nayak S. K., Kumar A. , Sarkar K. , Pathak A. , Banerjee A. , Laha T. Materials Science and Technology (MS&T) 2019 348-355 (2019)
Study of distribution of Carbon nanotube in Al-CNT nanocomposite synthesized via Spark-Plasma sintering by Maiti A., Laha T. IOP Conference Series: Materials Science and Engineering 338 - (2018)
Fe-based metallic glass composite coatings by atmospheric plasma spraying: Nano-tribological and corrosion property assessment by Kumar A., Bijalwan P. , Kumar R. , Dutta M. , Banerjee A. , Laha T. Asia Steel 2018 - (2018)
Effect of physio-chemically functionalized graphene nanoplatelet addition on tensile properties of microcrystalline aluminum synthesized via spark plasma sintering by Bhadauria A., Singh L. , Laha T. International Conference on Recent Advances in Materials & Manufacturing Technologies (IMMT 2017) - (2017)
Study of distribution of Al-CNT nanocomposite synthesized via Spark-Plasma sintering by Maiti A., Laha T. 7TH NATIONAL CONFERENCE ON PROCESSING AND CHARACTERIZATION OF MATERIALS (NCPCM 2017) - (2017)