Indian Institute of Technology Kharagpur |

Journal

Thermophysical and electrical properties of spark plasma sintered ZrB2-SiC-LaB6ultra-high temperature ceramic composites by Kashyap S.K., Mitra R. Ceramics International 52 4808-4819 (2026)
Effect of microstructural instability on the tensile properties of Inconel 617 alloy at advanced ultra-supercritical temperatures by Bagui S., Mahato B., Tarafder S., Mitra R. Journal of Materials Science 61 6421-6439 (2026)
Microstructure, Flow and Work Hardening Behavior of Ni-Based Superalloy BZL12Y by Behera S., Palit M., Chatterjee D., Singh A.K., Mitra R., Nandy T.K. Journal of Materials Engineering and Performance 35 11126-11140 (2026)
Pressureless sintering and characterization of gel-cast ZrB2-SiC based composites processed from optimized slurries by Kashyap S. K., N V. S., Mishra A. R., Bhanuprasad V. V., Patel M. , Dhara S. , Mitra R. Journal of the American Ceramic Society 108 1-19 (2025)
Effect of Tempering Temperature on the Strength-Impact Toughness Combination of Naval Grade Steels with Varied Al and Si Contents by Bhattacharyya A., Barik R. K., Sk. M. B., Sen M. , Rarhi N. , Balamuralikrishnan R. , Mitra R. , Chakrabarti D. Metallurgical and Materials Transactions A 57 734-751 (2025)
Magnetron sputtered Ti-Zr-Mo alloy thin film coatings for surface modification of Ti-6Al-4V by Marupalli B.C.G., Prasad P.S., Ghorui K., Byram P.K., Tudu B., Mitra R., Aich S. Materials Today Communications 49 114120- (2025)
An insight into high temeperature stability of microstructure and mechanical properties of bulk nanocrystalline (AlCoCrCuFeNi)99B1 high entropy alloy processed by mechanical alloying and spark plasma sintering by Sikdar K., Bhattacharya A. , Chattopadhyay C. , Roy D. , Mitra R. Materials Science and Engineering A 936 148408- (2025)
Designing a Modified Metal Organic Framework Bearing Poly(2-methacryloyloxy ethyl acetoacetate) and Its Application in the Detection of Heavy Metal Ions by Maity P., Mitra R., Singha N.K. ACS Applied Polymer Materials 7 6951-6964 (2025)
Structural, mechanical, and tribological properties of Ti68Zr26Mo6 high-temperature shape memory thin films: Effect of SiO2 buffer layer by Marupalli B.C.G., Sai Bhargava Reddy M., Huang W.M., Mitra R., Aich S. Vacuum 240 114468- (2025)
Influence of fibre architecture on the fracture behaviour of Cf-ZrB2-SiC UHTCMCs: A 3D image analysis by Mishra A. R., Kumar D. , Singh V. , Patel M. , Mitra R. Journal of the American Ceramic Society 108 20659- (2025)
Influence of Y (yttrium) doping on thermal stability of nanocrystalline AlCoCrCuFeNi high entropy alloy by Sikdar K., Mahata A., Chattopadhyay C., Roy D., Mitra R. Intermetallics 179 - (2025)
Remarkable grain growth resistance of Zr doped nanocrystalline AlCoCrCuFeNi high entropy alloy by Sikdar K., Mahata A., Chattopadhyay C., Roy D., Mitra R. Philosophical Magazine 105 1314-1336 (2025)
Remarkable grain growth resistance of Zr doped nanocrystalline AlCoCrCuFeNi high entropy alloy by Sikdar K., Mahata A. , Chattopadhyay C. , Roy D. , Mitra R. Philosophical Magazine 105 1314-1336 (2025)
Resistance to cyclic oxidation and evolution of oxide scale in 2.5D and 3D Cf/SiC composites with Si-B-C added matrix by Krishna R., Udayakumar A., Mitra R. Journal of the European Ceramic Society 45 117666- (2025)
Effective retention of nanocrystalline microstructure and superior mechanical properties at high temperature ( 0.75 Tm) via doping of Boron into AlCoCrCuFeNi high entropy alloy by Sikdar K., Mahata A., Chattopadhyay C., Roy D., Mitra R. Materials Characterization 219 - (2025)
Statistical analysis of lamellar and Widmannstätten structures obtained in Nb-rich -TiAl alloy with varied cooling rate and annealing duration by Firoz R., Gudavalli R.S.K., Dutta A., Mondal C., Mitra R. Intermetallics 175 - (2024)
3D microstructure characterization of 2D Cf-ZrB2-SiC ultra-high temperature ceramic matrix composites using X-ray microscopy by Ranjan Mishra A., Singh V., Patel M., Mitra R. Ceramics International 50 4492-4501 (2024)
Effect of CVI-induced porosity on elastic properties and mechanical behaviour of 2.5D and 3D Cf/SiC composites with multilayered interphase by Krishna R., Wilson P., Williams M.A., Srirangam P., Udayakumar A., Mitra R. Journal of the European Ceramic Society 44 4930-4948 (2024)
Oxidation behaviour of Zr added hypereutectic Nb-19Si-5Mo-20Ti alloy by Sala K., Mitra R. Intermetallics 165 108143- (2024)
Relative influence of microsegregation and structural unit size on the strength-impact toughness properties of an armor grade steel by Bhattacharya A., Barick R. K., Ghosh A. , Patra S. , Sen M. , Das A. , Mitra R. , Chakrabarti D. Materials Science and Engineering A 901 146501- (2024)
Effect of increased intra-bundle spacing on mechanical behaviour of Cf- ZrB2 SiC ultra-high temperature ceramic matrix composites produced by slurry infiltration and hot pressing by Mishra A.R., Singh V., Patel M., Mitra R. Open Ceramics 19 - (2024)
Study of distribution of B and N using auger electron spectroscopy (AES) and atom probe tomography (APT) techniques, in modified 9Cr[sbnd]1Mo steels with controlled addition of these elements by Rejeesh R., Sampreeth S., Mitra R., Chakrabarti D., Das C.R., Albert S.K. Materials Characterization 215 - (2024)
Ionic liquid modified PVDF/BCZT nanocomposites for space charge induced mechanical energy harvesting performance by Maiti P., Sasmal A., Arockiarajan A., Mitra R. Nanotechnology 35 245401- (2024)
Morphotropic phase boundary-based BaTi0.89Sn0.11O3 filler induced polarization tuned P(VDF-TrFE) composites as efficient piezo-tribo hybrid nanogenerators by Maiti P., Sasmal A., Arockiarajan A., Mitra R. Sustainable Energy and Fuels 8 729-744 (2024)
Development of a low-temperature novel porous Si3N4 Al2O3 composite with excellent specific mechanical properties by Maharshi S., Siddharth S. , Mitra R. , Roy S. Materials Chemistry and Physics 319 129372- (2024)
3D Printing of Biocompatible Nano-ink Derived from Waste Animal Bones by Das M., Jana A. , Mishra R. , Maity S. , Maiti P. , Panda S. K., Mitra R. , Arora A. , Owuor P. S., Tiwary C. S. ACS Applied Bio Materials 6 1566-1576 (2023)
Recrystallization kinetics, precipitate evolution and grain refinement of Nb stabilized ferritic stainless steel for producing thicker plate/strip industrially by Modak P., Chakrabarti D. , Mitra R. , Patra S. Metallurgical and Materials Transactions A 54 1024-1048 (2023)
Evaluation of elastic constants and high temperature tensile behaviour with damage assessment of the SiC seal-coated 2.5D Cf/SiC composites having multilayered interphase and Si-B-C added matrix by Krishna R., Parimi V.K., Udayakumar A., Mitra R. Journal of the European Ceramic Society 43 2388-2401 (2023)
Comparative interplay of C and Mn on austenite stabilization and low temperature impact toughness of low C medium Mn steels by Bhattacharya A., Biswal S. , Barik R. , Mahato B. , Ghosh M. , Mitra R. , Chakrabarti D. Materials Characterization 2024 113658- (2023)
Effect of B and N Content and Austenitization Temperature on the Tensile and Impact Properties of Modified 9Cr-1Mo Steels by Ravindran R., Barik R. K., Mitra R. , Kostryzhev A. , Das C. , Albert S. K., Chakrabarti D. Metals 13 1124- (2023)
Controlled directionality in 3D printing of graphite-reinforced polymer composite with enhanced mechanical properties by Das M., Mishra R., Das P., Kashyap S.K., Panda S.K., Mitra R., Owuor P.S., Arora A., Tiwary C.S. Composites Science and Technology 235 109955- (2023)
Effect of LaB6 addition on compressive creep behavior with simultaneous oxide scale growth of spark plasma sintered ZrB2-SiC composites by Kashyap S.K., Mitra R. Journal of the American Ceramic Society 106 1424-1442 (2023)
Effect of martensite twins on local scale cleavage crack propagation in a medium carbon armor grade steel by Bhattacharya A., Barik R. K., Nandy S. , Sen M. , Prithiv T. , Patra S. , Mitra R. , Chakrabarti D. Materialia 30 101800- (2023)
Effect of Microstructural Evolution on Creep and Rupture Behavior of Inconel 617 Alloy by Bagui S., Sahu B.P., Mahato B., Mandal M., Tarafder S., Mitra R. Journal of Materials Engineering and Performance 32 1292-1309 (2023)
Effect of particle size on additive manufacturing of complex architecture of silicon carbide by Jana A., Das M., Tiwari S., Basha S.S., Gautam A.R.S., Panda S.K., Mitra R., Kumar S., Devasia R., Tiwary C.S. Ceramics International 49 17396-17404 (2023)
The relative effect of boron and nitrogen concentrations on microstructure and creep resistance of weld simulated heat-affected zones of modified 9Cr-1Mo steel by Ravindran R., Biswal S. , Mitra R. , Chakrabarti D. , Das C. , Albert S. K. Materials Science and Engineering A 145417- (2023)
Stable nanocrystalline structure attainment and strength enhancement of Cu base alloy using bi-modal distributed tungsten dispersoids by Roy D., Pal S., Tiwary C.S., Gupta A.K., Babu P.N., Mitra R. Philosophical Magazine 102 189-209 (2022)
Effect of Zr or Ga Addition and Annealing on Microstructural Evolution, Deformation and Fracture Behaviour of Nb-19Si-5Mo-20Ti Based Hypereutectic Alloy by Sala K., Mitra R. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 53 1717-1737 (2022)
Oxidation Resistance and Evolution of Multi-layered Oxide Scale During Isothermal and Cyclic Exposure of ZrB2 SiC LaB6 Composites at 1300 °C to 1500 °C by Kashyap S.K., Sala K., Mitra R. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 53 147-171 (2022)
Grain size dependant high-temperature hot corrosion (HTHC) degradation behavior in Alloy 617 during exposure in Na2SO4 + NaCl + V2O5 salt mixture by Bhuyan P., Sanyal S., Mitra R., Mandal S. Journal of Alloys and Compounds 914 165262- (2022)
Grain size dependant high-temperature hot corrosion (HTHC) degradation behaviour in Alloy 617 during exposure in Na2SO4 + NaCl + V2O5 salt mixture by Bhuyan P., Sanyal S. , Mitra R. , Mandal S. Journal of the alloys and compounds 914 165262.1-165262.14 (2022)
A novel approach combining grain boundary engineering and grain boundary serration to enhance high-temperature hot corrosion resistance in Alloy 617 by Bhuyan P., Sanyal S. , Sarma V. S., Boer B. D., Mitra R. , Mandal S. Materialia 23 101451-101451 (2022)
Phenomenal Effect of Stable (Ti, Mo)C Nano-Sized Precipitates in Retarding the Recrystallization and Grain Growth in High-Strength Ferritic Steel by Modak P., Mandal A., Gupta R., Karmakar A., Sarkar S.K., Ahlawat S., Haldar A., Mitra R., Neogy S., Biswas A., Chakrabarti D. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 53 689-705 (2022)
Challenges and breakthroughs in the development of high temperature materials by Mitra R. IIM Metal News 24 6-28 (2022)
Investigation of non-classical creep behavior of Inconel 617 alloy at 700oC and 800oC through interrupted tests and microstructural characterizations by Bagui S., Mandal M. , Sahoo B. K., Laha K. , Tarafder S. , Mitra R. Materials Science and Engineering A 832 142474.1-142474.14 (2022)
Tailoring the Processing Route to Optimize the Strength Toughness Combination of Pearlitic Steel by Behera S., Barik R.K., Hasan S.M., Mitra R., Chakrabarti D. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 53 3853-3868 (2022)
Combining crystal plasticity and electron microscopy to elucidate texture dependent micro-mechanisms of tensile deformation in lath martensitic steel by Chatterjee A., Basiruddin S. M., Ghosh A. , Mitra R. , Chakrabarti D. International Journal of Plasticity 153 103251.1-103251.26 (2022)
Molten Salt Synthesized MgNiO2 Micro/Nano-Particles for High Energy Density Supercapacitor and Electrocatalyst for Hydrogen Evolution Reaction in Alkaline Medium by Maitra S., Mitra R. , Nath T. K. Journal of Nanoscience and Nanotechnology 21 5556-5568 (2021)
Relative effect of B and N concentrations on the microstructural stability and mechanical properties of modified 9Cr-1Mo steel by Rejeesh R., Bhattacharya A., Haldar C., Mitra R., Chakrabarti D., Das C.R., Albert S.K., Bhaduri A.K. Journal of Alloys and Compounds 867 158971- (2021)
Effect of annealing temperature on microstructure and mechanical response of sputter deposited Ti-Zr-Mo high temperature shape memory alloy thin films by Marupalli B.C.G., Adhikary T., Sahu B.P., Mitra R., Aich S. Applied Surface Science Advances 6 100137.1-100137.9 (2021)
Strain-induced microstructural evolution and its implication on high-temperature hot corrosion (HTHC) phenomena in Alloy 617 by Bhuyan P., Pradhan S. K., Mitra R. , Mandal S. Materials Characterization 178 111272- (2021)
Strain-induced microstructural evolution and its implication on high-temperature hot corrosion (HTHC) phenomena in Alloy 617 by Bhuyan P., Pradhan S.K., Mitra R., Mandal S. Materials Characterization 178 - (2021)
Creep Deformation Behavior of Inconel 617 Alloy in the Temperature Range of 650 °C to 800 °C by Bagui S., Sahu B.P., Laha K., Tarafder S., Mitra R. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 52 94-107 (2021)
Structure and corrosion property of pulse electrodeposited nanocrystalline nickel-tungsten-copper alloy coating by Sarangi C.K., Sahu B.P., Mishra B.K., Mitra R. Journal of Applied Electrochemistry 51 1157-1174 (2021)
Precipitate evolution during aging and its individual role on high-temperature hot corrosion response in Alloy 617 by Bhuyan P., Paliwal M., Sarma V.S., de Boer B., Mitra R., Mandal S. Journal of Alloys and Compounds 871 159499- (2021)
Effect of Ti Addition and Microstructural Evolution on Toughening and Strengthening Behavior of as Cast or Annealed Nb Si Mo Based Hypoeutectic and Hypereutectic Alloys by Sala K., Mitra R. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 52A 3436-3459 (2021)
Effect of Ti addition on the kinetics and mechanism of non-isothermal and isothermal oxidation of Nb Si Mo alloys at 900 °C 1200 °C by Sala K., Kashyap S.K., Mitra R. Intermetallics 138 107338.1-107338.16 (2021)
Effect of Ti or Fe Addition and Annealing on Microstructural Evolution and Mechanical Properties of Hypereutectic Nb-Si-Mo Alloys by Sala K., Morankar S., Mitra R. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 52 1185-1211 (2021)
Microstructural evolution and mechanical properties of as-cast and annealed Nb Si Mo based hypoeutectic alloys with quaternary additions of Ti or Fe by Sala K., Mitra R. Materials Science and Engineering A 802 140663- (2021)
Microstructure and composition of multi-layered oxide scale evolved during isothermal exposure of ZrB2 SiC LaB6 composite to air at 1500°C by Kashyap S.K., Mitra R. Philosophical Magazine Letters 201 265-276 (2021)
Microstructure and High-Temperature Tensile Behavior of Ni-Based Superalloy EP741NP for Aerospace Applications by Behera S., Dash M.K., Kumar N.K., Mitra R., Appa Rao G. Journal of Materials Engineering and Performance - (2021)
Aqueous Mg-Ion Based Supercapacitor and Bifunctional Electro-Catalyst of Sol Gel Derived MgTiO3 Nanoparticles by Maitra S., Mitra R. , Nath T. K. Journal of Nanoscience and Nanotechnology 21 6217-6226 (2021)
Investigation of electrochemical performance of sol-gel derived MgFe2O4 nanospheres as aqueous supercapacitor electrode and bi-functional water splitting electrocatalyst in alkaline medium by Maitra S., Mitra R., Nath T.K. Current Applied Physics 27 73-88 (2021)
Sol-gel derived MgCr2O4 nanoparticles for aqueous supercapacitor and alkaline OER and HER bi-functional electrocatalyst applications by Maitra S., Mitra R. , Nath T. K. Journal of Alloys and Compounds 858 157679.1-157679.15 (2021)
Role of copper content on the structure and corrosion properties of pulse electrodeposited Ni-W-Cu alloy by Sarangi C. K., Saha B. P., Mishra B. K., Mitra R. Journal of Metallurgy and Materials Science 62 107-121 (2020)
A combined electron microscopy and atom probe tomography study of the nanocrystalline Ni-Zr thin film by Sahu B., Dutta A. , Mitra R. Journal of Alloys and Compounds 844 156078- (2020)
Densification behavior involving creep during spark plasma sintering of ZrB2-SiC based ultra-high temperature ceramic composites by Kashyap S.K., Mitra R. Ceramics International 46 5028-5036 (2020)
A potential insight into the serration behaviour of 3n (n 3) boundaries in Alloy 617 by Bhuyan P., Reddy K. V., Pradhan S. K., Pal S. , Mitra R. , Mandal S. Materials Chemistry and Physics 248 122919- (2020)
Electrochemical aspects of sol-gel synthesized MgCoO2 for aqueous supercapacitor and alkaline HER electrocatalyst applications by Maitra S., Chakraborty P.K., Mitra R., Nath T.K. Current Applied Physics 20 1404-1415 (2020)
Influence of substrate bias voltage on structure and properties of DC magnetron sputtered Ni-Zr alloy thin films by Sahu B.P., Dutta A., Mitra R. Journal of Materials Research 35 1543-1555 (2020)
Tensile creep and rupture behavior along with evolution of microstructure in a Zr-2.5Nb alloy by Guguloth K., Ghosh M. , Swaminathan J. , Mitra R. Materials Science and Engineering A 791 139681- (2020)
Pulse electrodeposition and characterization of graphene oxide particle reinforced Ni-W alloy matrix nanocomposite coatings by Sarangi C. K., Sahu B. P., Mishra B. K., Mitra R. Journal of Applied Electrochemistry 50 265-279 (2020)
Investigation of electrochemical performance of MgNiO2 prepared by sol-gel synthesis route for aqueous-based supercapacitor application by Maitra S., Mitra R., Nath T.K. Current Applied Physics 20 628-637 (2020)
Investigation of electrochemical performance of MgNiO2 prepared by sol-gel synthesis route for aqueous-based supercapacitor application by Maitra S., Mitra R. , Nath T. K. Current Applied Physics 20 628-637 (2020)
Kinetics and evolution of oxide scale during various stages of isothermal oxidation at 1300°C in spark plasma sintered ZrB2 - SiC - LaB6 composites by Kashyap S. K., Kumar A. , Mitra R. Journal of the European Ceramic Society 40 4997-5011 (2020)
Structure and properties of Ni1-xTixN thin films processed by reactive magnetron co-sputtering by Sahu B. P., Ray M. , Mitra R. Materials Characterization 169 110604- (2020)
Effect of moist air and minor Zr addition on oxidation behavior of arc-melted multiphase Mo-Si-B alloys in the temperature range of 1000oC-1300oC by Kumar N. K., Das J. , Mitra R. Oxidation of Metals 93 483-513 (2020)
Influence of Composition on Nanoindentation Response of Ni-Zr Alloy Thin Films by Sahu B.P., Dutta A., Mitra R. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 50 5656-5669 (2019)
Mechanism of negative strain rate sensitivity in metallic glass film by Sahu B. P., Dutta A. , Mitra R. Journal of Alloys and Compounds 784 488-499 (2019)
In-situ and ex-situ study of crystallization behaviour of magnetron sputtered Ni63Zr37 amorphous thin film by Sahu B. P., Chatterjee A. , Dutta A. , Mitra R. Philosophical Magazine A 99 2545-2561 (2019)
Microstructural stability during creep exposure of 9Cr-1Mo steel treated at different normalization temperatures by Chatterjee A., Modak P. , Barat K. , Chakrabarti D. , Mitra R. Journal of Materials Engineering and Performance 28 3076-3093 (2019)
Microstructural Stability During Creep Exposure of 9Cr-1Mo Steel Treated at Different Normalization Temperatures by Chatterjee A., Modak P., Barat K., Chakrabarti D., Mitra R. Journal of Materials Engineering and Performance 28 3076-3093 (2019)
X-ray tomography study on porosity and particle size distribution in in-situ Al-4.5Cu-5TiB2 semi-solid rolled composites by Morankar S., Mandal M. , Kourra N. , Williams M. A., Mitra R. , Srirangam P. The Journal of The Minerals, Metals & Materials Society 71 4050-4058 (2019)
X-Ray Tomography Study on Porosity and Particle Size Distribution in In Situ Al-4.5Cu-5TiB2 Semisolid Rolled Composites by Morankar S., Mandal M., Kourra N., Williams M.A., Mitra R., Srirangam P. JOM 71 4050-4058 (2019)
Evaluating the efficacy of grain boundary serrations in attenuating high-temperature hot corrosion degradation in Alloy 617 by Bhuyan P., Pradhan S. K., Mitra R. , Mandal S. Corrosion Science 149 164-177 (2019)
Recipe for improving the impact toughness of high-strength pearlitic steel by controlling the cleavage cracking mechanisms by Behera S., Barik R. K., Sk M. B., Mitra R. , Chakrabarti D. Materials Science and Engineering A 764 138256- (2019)
Recipe for improving the impact toughness of high-strength pearlitic steel by controlling the cleavage cracking mechanisms by Behera S., Barik R.K., Sk M.B., Mitra R., Chakrabarti D. Materials Science and Engineering A 764 - (2019)
Effect of Fe addition and moist environment on the high temperature oxidation behavior of Mo76-xSi14B10Fex (x = 0, 0.5, 1â ¯at.%)composites by Kumar N.K., Mitra R., Das J. Intermetallics 111 - (2019)
Effect of Fe addition and moist environment on the high temperature oxidation behavior of Mo76-xSi14B10Fex (x = 0, 0.5, 1 at.%) composites by Kumar N., Mitra R. , Das J. Intermetallics 111 106498-9 (2019)
Effect of LaB6 additions on densification, microstructure, and creep with oxide scale formation in ZrB2-SiC composites sintered by spark plasma sintering by Kashyap S. K., Mitra R. Journal of the European Ceramic Society 39 2782-2793 (2019)
Effect of LaB6 additions on densification, microstructure, and creep with oxide scale formation in ZrB2-SiC composites sintered by spark plasma sintering by Kashyap S. K., Mitra R. Journal of the European Ceramic Society 39 2782-2793 (2019)
Relative effect of C and Mn on strength-toughness of medium Mn steels by Bhattacharya A., Bokinala P.K., Mitra R., Chakrabarti D. Materials Science and Technology (United Kingdom) 35 55-67 (2019)
Effect of microstructure and microtexture evolution on creep behavior of hot-rolled and mushy-state rolled Al-4.5Cu-5TiB2 in-situ composite by Mandal M., Mitra R. Materials Science and Engineering A 760 88-104 (2019)
Effect of microstructure and microtexture evolution on creep behavior of hot-rolled and mushy-state rolled Al-4.5Cu-5TiB2 in-situ composite by Mandal M., Mitra R. Materials Science and Engineering A 760 88-104 (2019)
Relative effect of C and Mn on strength-toughness of medium Mn steels by Bhattacharyya A., Bokinala P. K., Mitra R. , Chakrabarti D. Materials Scinece and Technology 35 55-67 (2019)
Effect of moist environment on the oxidation behavior of Mo76-xSi14B10Fex (x = 0, 0.5, 1 at.%) ultrafine composites in the range of 700 800 °C by Kumar N., Mitra R. , Das J. Corrosion Science 155 86-96 (2019)
Effect of moist environment on the oxidation behavior of Mo 76- x Si 14 B 10 Fe x (x = 0, 0.5, 1 at.%)ultrafine composites in the range of 700â 800â Â°C by Kumar N.K., Mitra R., Das J. Corrosion Science 155 86-96 (2019)
Study of dry sliding wear behavior of hot-rolled and mushy-state rolled Al-4.5Cu-5TiB2 in-situ composite with analysis of work hardening and subsurface microstructure-microtexture evolution using EBSD by Mandal M., Mitra R. Metallurgical and Materials Transactions A 50A 5356-5372 (2019)
Effect of Zr addition on microstructure, hardness and oxidation behavior of arc-melted and spark plasma sintered multiphase Mo-Si-B alloys by Kumar N., Das J. , Mitra R. Metallurgical and Materials Transactions A 50A 2041-2060 (2019)
Study of Dry Sliding Wear Behavior of Hot-Rolled and Mushy-State Rolled Al-4.5Cu-5TiB2 In-Situ Composite with Analysis of Work Hardening and Subsurface Microstructure-Microtexture Evolution Using EBSD by Mandal M., Mitra R. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 50 5356-5372 (2019)
Effect of Zr addition on microstructure, hardness and oxidation behavior of arc-melted and spark plasma sintered multiphase Mo-Si-B alloys by Kumar N. K., Das J. , Mitra R. Metallurgical and Materials Transactions A 50A 2041-2060 (2019)
Effect of Zr Addition on Microstructure, Hardness and Oxidation Behavior of Arc-Melted and Spark Plasma Sintered Multiphase Mo-Si-B Alloys by Kumar N.K., Das J., Mitra R. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 50 2041-2060 (2019)
Ferrite Grain Refinement, Grain Size Distribution, and Texture After Thermomechanical Processing and Continuous Cooling of Low-C Steel by Patra S., Mandal A. , Mandal M. , Kumar V. , Mitra R. , Chakrabarti D. Metallurgical and Materials Transactions A 50 947-965 (2019)
Ferrite Grain Refinement, Grain Size Distribution, and Texture After Thermomechanical Processing and Continuous Cooling of Low-C Steel by Patra S., Mandal A., Mandal M., Kumar V., Mitra R., Chakrabarti D. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 50 947-965 (2019)
Influence of composition on nanoindentation response of Ni-Zr alloy thin films by Sahu B. P., Dutta A. , Mitra R. Metallurgical and Materials Transactions A 50 5656-5669 (2019)
Effect of pre-cold rolling on the evolution of microstructure, microtexture, and mechanical properties of the mushy state rolled in-situ Al-4.5Cu-5TiB 2 composite by Mandal M., Mitra R. Materials Characterization 146 267-278 (2018)
Effect of Starting As-cast Structure on the Microstructureâ Texture Evolution During Subsequent Processing and Finally Ridging Behavior of Ferritic Stainless Steel by Modak P., Patra S., Mitra R., Chakrabarti D. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 49 2219-2234 (2018)
Effect of starting as-cast structure on the microstructure-texture evolution during subsequent processing and finally ridging behavior of ferritic stainless steel by Modak P., Patra S. , Mitra R. , Chakrabarti D. Metallurgical and Materials Transactions A Published online.To be printed soon. - (2018)
Mechanism of creep deformation with evolution of microstructure and texture of Zr-2.5Nb alloy by Guguloth K., Mitra R. , Chowdhury S. G., Swaminathan J. Materials Science and Engineering A 721 286-302 (2018)
Effect of Zr content on structure property relations of Ni-Zr alloy thin films with mixed nanocrystalline and amorphous structure by Sahu B. P., Sarangi C. , Mitra R. Thin Solid Films 660 31-45 (2018)
Accelerated creep behavior of Nb and Cu added 18Cr-8Ni austenitic stainless steel by Bagui S., Laha K., Mitra R., Tarafder S. Materials Research Express 5 - (2018)
Accelerated creep behavior of Nb and Cu added 18Cr-8Ni austenitic stainless steel by Bagui S., Laha K. , Mitra R. , Tarafder S. Materials Research Express 5 116515- (2018)
Influence of a few important parameters on the rheological behaviour of silicon carbide nanoparticles dispersed aqueous suspension by Barick P., Mitra R. , Saha B. P. Ceramic International 44 351-356 (2018)
Role of hierarchical martensitic microstructure on localized deformation and fracture of 9Cr-1Mo steel under impact loading at different temperatures by Chatterjee A., Ghosh A. , Moitra A. , Bhaduri A. K., Mitra R. , Chakrabarti D. International Journal of Plasticity 104 104-133 (2018)
Comparative evaluations and microstructure mechanical property relations of sintered silicon carbide consolidated by various techniques by Barick P., Chatterjee A. , Majumdar B. , Saha B. P., Mitra R. Metallurgical and Materials Transactions A 49 1182-1201 (2018)
High temperature oxidation response of Al/Ce doped Mo Si B composites by Das J., Roy B. , Kumar N. , Mitra R. Intermetallics 84 101-109 (2017)
Improvement of oxidation resistance of arc-melted Mo76Si14B10 by microstructure control upon minor Fe addition by Kumar N., Roy B. , Mitra R. , Das J. Intermetallics 88 28-30 (2017)
Effect of annealing and process parameters on microstructure and properties of DC Magnetron Sputtered Ni-Zr alloy thin films by Sahu B. P., Mitra R. MRS Advances 1-8 (2017)
Effect of composition and isothermal holding temperature on the precipitation hardening in Vanadium-microalloyed steels by Karmakar A., Mukherjee S. , Kundu S. , Srivastava D. , Mitra R. , Chakrabarti D. Materials Characterization 132 31-40 (2017)
Effect of Cooling Rate and Chemical Composition on Microstructure and Properties of Naturally Cooled Vanadium-Microalloyed Steels by Karmakar A., Sahu P. , Neogy S. , Chakrabarti D. , Mitra R. , Mukherjee S. , Kundu S. Metallurgical and Materials Transactions A 48 1581-1595 (2017)
Effect of Cr on the evolution of microstructures in as-cast ternary niobium-silicide-based composites by Maji P., Mitra R. , Ray K. K. Intermetallics 85 34-47 (2017)
Effect of Microalloy Precipitates on the Microstructure and Texture of Hot-Deformed Modified 9Cr-1Mo Steel by Chatterjee A., Dutta A. , Sk M. B., Mitra R. , Bhaduri A. K., Chakrabarti D. Metallurgical and Materials Transactions A 48 2410-2424 (2017)
Effect of Si3N4 Addition on Oxidation Resistance of ZrB2-SiC Composites by Mallik M., Ray K. K., Mitra R. Coatings 7 92-100 (2017)
Effect of SiC content on electrical, thermal, and ablative properties of pressureless sintered ZrB2-based ultrahigh temperature ceramic composites by Mallik M., Kailath A. J., Ray K. K., Mitra R. Journal of the European Ceramic Society 37 3863-3877 (2017)
Effect of substrate temperature and annealing on structure, stress and properties of reactively co-sputtered Ni-TiN nanocomposite thin films by Kumar M., Mitra R. Thin Solid Films 624 70-82 (2017)
Spray-freeze-dried nanosized silicon carbide containing granules: Properties, compaction behaviour and sintering by Prasenjit Barick, Bhaskar Prasad Saha, Shrikant V. Joshi, Rahul Mitra Journal of the European Ceramic Society 36 3863-77 (2016)
Effect of mushy state rolling on the microstructure, microhardness and microtexture in Al-4.5 wt%. Cu-5 wt%TiB2 in-situ composite by Mandal M., Mitra R. JOM 68(7) 1902-08 (2016)
Effect of pressure and temperature on densification, microstructure and mechanical properties of spark plasma sintered silicon carbide processed with β-silicon carbide nanopowder and sintering additives by Prasenjit Barick, Dibyendu Chakravarty, Bhaskar Prasad Saha, Rahul Mitra, Shrikant V. Joshi Ceramic International 42 3836-3848 (2016)
Dynamic Fracture Behaviour of Thermo-Mechanically Processed Modified 9Cr-1Mo Steel by Arya Chatterjee, A. Moitra, A. K. Bhaduri, R. Mitra and D. Chakrabarti Engineering Fracture Mechanics 149 74-88 (2015)
Effect of concentration and molecular weight of polyethylenimine on zeta potential, isoelectric point of nanocrystalline silicon carbide in aqueous and ethanol medium by Prasenjit Barick, Bhaskar Prasad Saha, Rahul Mitra, Shrikant V. Joshi Ceramic International 41 4289-93 (2015)
Effect of Y2O3 addition on oxidation behavior of W-Cr alloys by Suresh Telu, Rahul Mitra, and Shyamal Kumar Pabi Metallurgical and Materials Transactions, A. 46A 5909-19 (2015)
Effect of post-solutionizing cooling rate on microstructure and low cycle fatigue behavior of a cast nickel based superalloy by Kumud K. Mehta, R. Mitra, and Sanjay Chawla Materials Science and Engineering A 611 280-89 (2014)
Effect of Si3N4 addition on compressive creep behavior of hot pressed ZrB2-SiC composites by Manab Mallik, K.K. Ray, and R. Mitra Journal of the American Ceramic Society 97(9) 2957-64 (2014)
Effect of substrate bias on microstructure and properties of Ni-TiN nanocomposite thin films deposited by reactive magnetron co-sputtering by Mukesh Kumar and R. Mitra Surface and Coatings Technology 251 239-246 (2014)
Effect of Ar:N2 ratio on structure and properties of Ni-TiN nanocomposite thin films processed by reactive RF/DC magnetron sputtering by Mukesh Kumar, S. Mishra, and R. Mitra Surface and Coatings Technology 228 100-114 (2013)
Effect of homogeneity of particle distribution on tensile crack propagation in mushy state rolled in-situ Al-4.5Cu-5TiB2 particulate composite by A. Jana, I.G. Siddhalingeshwar, and R. Mitra Materials Science and Engineering A 575 104-110 (2013)
Effect of Oxygen Partial Pressure on the Cyclic Oxidation Behavior of Mo76Si14B10 by B. Roy, Khushboo, J. Das, R. Mitra, and S.K. Roy Metallurgical and Materials Transactions, A. 44A 2910-13 (2013)
Effect of SiC content, additives and process parameters on densification and structure-property relations of pressureless sintered ZrB2-SiC composites by Manab Mallik, Sabyasachi Roy, K.K. Ray and R. Mitra Ceramic International 39(3) 2915-32 (2013)
Transient stage oxidation behavior of Mo76Si14B10 alloy at 1150 °C by Barna Roy, J. Das and R. Mitra Corrosion Science 68 231-237 (2013)
Processing of silica foam using steam heating and its characterization by Jitendra Verma, R. Mitra and M. Vijayakumar Journal of the European Ceramic Society 33 943-51 (2013)
Effect of hot rolling temperature and thermal cycling on creep and damage behavior of powder metallurgy processed Al-SiC particulate composite by Jishnu J. Bhattacharryya and R. Mitra Materials Science and Engineering A 557 92-105 (2012)
Electrical and thermophysical properties of ZrB2 and HfB2 based composites by Manab Mallik, Ansu J. Kailath, K.K. Ray and R. Mitra Journal of the European Ceramic Society 32 2545-2555 (2012)
Influence of superficial CeO2 coating on high temperature oxidation behavior of Ti-6Al-4V by V. Sreedhar, J. Das, R. Mitra and S.K. Roy Journal of alloys and compounds 519 106-111 (2012)
Effect of Age-Hardening on Dry Sliding wear behavior of mushy state rolled In-situ Al-4.5Cu-5TiB2 composites by K. Pavitra and R. Mitra Materials Science and Engineering A 557 84-91 (2012)
Microstructural evolution and mechanical properties of nano-intermetallics (in-situ) dispersed amorphous matrix Al65Cu20Ti15 composite synthesized by mechanical alloying and Hot Isostatic Pressing by D. Roy, R. Mitra, O.A. Ojo, W. Lojkowski, I. Manna Metallurgical and Materials Transactions, A. 42A 2498-2508 (2011)
Effect of Ce addition on the oxidation behaviour of Mo-Si-B-Al ultrafine composites at 1100 oC by J. Das, R. Mitra and S.K. Roy Scripta Materialia 64 486-89 (2011)
Effect of mushy state rolling on age-hardening and tensile behavior of Al-4.5Cu alloy and in-situ Al-4.5Cu-5TiB2 composite by I. G. Siddhalingeswar, M.A. Herbert, M. Chakraborty, and R. Mitra Materials Science and Engineering A 528 1787-98 (2011)
Oxidation behavior of hot-pressed ZrB2-SiC and HfB2-SiC composites by Manab Mallik, K.K. Ray and R. Mitra Journal of the European Ceramic Society 31(1-2) 199-215 (2011)
Oxidation behavior of Mo-Si-B-(Al,Ce) ultrafine-eutectic dendrite composites in the temperature range of 500-700 oC by J. Das, R. Mitra and S.K. Roy Intermetallics 19(1) 1-8 (2011)
Sliding wear behavior of in situ Al-4.5Cu-5TiB2 composite processed by single and multiple roll passes in mushy state by I.G. Siddhalingeswar, D. Deepthi, M. Chakraborty, and R. Mitra Wear 271 748-759 (2011)
Impact abrasive wear response of carbon/carbon composites at elevated temperatures by S. Sarkar, E. Badisch, R. Mitra, Manish Roy Tribology Letters 37(2) 445-451 (2010)
Room temperature mechanical properties and tensile creep behavior of powder metallurgy processed and hot rolled Al and Al-SiCp composites by Sharmilee Pal, K.K. Ray and R. Mitra Materials Science and Engineering A. 527 6831-6837 (2010)
Isopropanol as an air-liquid interface reformer in the processing of cellular silica by Sarika Mishra and R. Mitra Journal of Alloys and Compounds 506 308-312 (2010)
Strength and Fracture Behaviour of Two, Three and Four Dimensionally Reinforced Carbon/Carbon Composites by Sourav Sarkar, Sweety Kumari, V.G. Sekaran and R. Mitra Materials Science and Engineering, A. 527(7-8) 1835-43 (2010)
Structure-property correlation in cellular silica processed through hydrophobized fused silica powder for aerospace application by Sarika Mishra, R. Mitra, and M. Vijayakumar Journal of Alloys and Compounds 504 76-82 (2010)
Microstructure and creep behavior of DMS4-type nickel based superalloy single crystals with orientations near <001> and <011> by D. Chatterjee, N. Hajari, N. Das, and R. Mitra Materials Science and Engineering A 528 604-613 (2010)
Effect of grain size on strain rate sensitivity of cryomilled Al-Mg alloy by Byungmin Ahn, Rahul Mitra, Enrique J. Lavernia and Steve R. Nutt Journal of Materials Science 45 4790-4795 (2010)
Tensile properties of as cast and mushy state rolled Al-4.5Cu alloy and in-situ Al4.5Cu-5TiB2 composite by Mervin A. Herbert, G. Das, R. Maiti, M. Chakraborty and R. Mitra International Journal of Cast Metals Research 23(4) 216-224 (2010)
Structure and properties of short fiber reinforced silica matrix composite foams processed through slurry based route by Sarika Mishra, R. Mitra and M. Vijayakumar Ceramic International 35(8) 119-124 (2009)
Studies on laser sintering of mechanically alloyed Al50Ti40Si10 composite by Singh S. S., Roy D. , Mitra R. , Rao R. S., Dayal R. K., Raj B. , Manna I. Materials Science and Engineering: A 501 242-247 (2009)
Studies on wear behavior of nano-intermetallic reinforced Al-base amorphous/nanocrystalline matrix in situ composite by Roy D., Singh S. S., Basu B. , Lojkowski W. , Mitra R. , Manna I. Wear 266 1113-1118 (2009)
Synthesis and characterization of precipitation hardened amorphous matrix composite by mechanical alloying and pulse plasma sintering of Al65Cu20Ti15 by Roy D., Singh S. S., Mitra R. , Rosinski M. , Michalski A. , Lojkowski W. , Manna I. Philosophical Magazine 89 1051-1061 (2009)
Synthesis and Characterization of Precipitation Hardened Amorphous Matrix Composite by Mechanical Alloying and Pulse Plasma Sintering of Al65Cu20Ti15 by D. Roy, S.S. Singh, R. Mitra, W. Lojkowski and I. Manna Philosophical Magazine A 89(12) 1051-61 (2009)
The effect of thermal cycling on creep behavior of powder metallurgy processed and hot rolled Al and Al-SiC particulate composites by S. Pal, V.V. Bhanuprasad, R. Mitra and K.K. Ray Metallurgical and Materials Transactions A. 40A 3171-85 (2009)
The mechanical properties of nano-TiO2 dispersed Al65Cu20Ti15 amorphous / nanocrystalline matrix bulk composite prepared by mechanical alloying and high pressure sintering by Roy D., Mitra R. , Chudoba . , Witczak Z. , Ojkowski W. , Fecht H. J., Manna I. Solid State Phenomena 140 161-166 (2009)
Non-isothermal and Cyclic Oxidation Behaviour of Mo-Si-B and Mo-Si-B-Al Alloys by Sharma Paswan, R. Mitra and S.K. Roy Metallurgical and Materials Transactions A. 40A 2644-2658 (2009)
Processing and microstructure of particle stabilized silica foams by Sarika Mishra, R. Mitra and M. Vijayakumar Materials Letters 63 2649-2651 (2009)
Light weight silica tiles through foam casting method by Sarika Mishra, R. Mitra, and M. Vijayakumar Journal of the European Ceramic Society 28(9) 1769-76 (2008)
Wear Behaviour of Cast and Mushy State Rolled Al-4.5Cu Alloy and In-situ Al-4.5Cu-5TiB2 Composite by Mervin Herbert, R. Maiti, R. Mitra, and M. Chakraborty Wear 265 1606-18 (2008)
Damage Evaluation in Discontinuously Reinforced Aluminum Matrix Composites Subjected to Thermal Cycling by Sharmilee Pal, V.V. Bhanuprasad, and R. Mitra Materials Science and Engineering A 489 11-20 (2008)
Non-isothermal and Isothermal Oxidation Behaviour of the Nb-Si-Mo Alloys by Chattopadhyay K., Mitra R. , Ray K. K. Metallurgical and Materials Transactions A. 39A 577-92 (2008)
Effect of Sintering on Microstructure and Mechanical Properties of Nano-TiO2 Dispersed Al65Cu20Ti15 Amorphous/Nanocrystalline Matrix Composite by Roy D., Chakravarty D. , Mitra R. , Manna I. Journal of Alloys and Compounds 460 320-325 (2008)
Effect of Sintering on Microstructure and Mechanical Properties of Nano-TiO2 Dispersed Al65Cu20Ti15 Amorphous/Nanocrystalline Matrix Composite by D. Roy, D. Chakravarty, R. Mitra, and I. Manna Journal of alloys and compounds 460 (1-2) 320-325 (2008)
Aging behaviour of Al-Cu-Mg Alloy-SiC Composites by Sharmilee Pal, R. Mitra, and V.V. Bhanuprasad Materials Science and Engineering A 480(1-2) 496-505 (2008)
Structure and mechanical properties of Al65Cu20Ti15-based amorphous/nanocrystalline composite prepared by high pressure sintering by Roy D., Mitra R. , Chudoba T. , Witczak Z. , Lojkowski W. , Fecht H. , Manna I. Materials Science and Engineering: A 497 93-100 (2008)
A novel route for the dispersion of fibers for the preparation of fiber reinforced porous composites by Sarika Mishra, R. Mitra, and M. Vijayakumar Materials Letters 62(12-13) 2025-2028 (2008)
Synthesis and characterization of in situ nanocrystalline intermetallic phase reinforced AlTiSi amorphous matrix composite by Roy D., Mitra R. , Fedyk R. , Witczak Z. , Lojkowski W. , Manna I. Philosophical Magazine 88 3031-3041 (2008)
Synthesis and characterization of in-situ nanocrystalline intermetallic phase reinforced AlTiSi amorphous matrix composite by D. Roy, R. Mitra, R. Fedyk, Z. Witczak, W. Lojkowski, I. Manna Philosophical Magazine A 88 3031-41 (2008)
Microstructural Evolution, Hardness and Alligatoring in the Mushy State Rolled Cast Al-4.5Cu Alloy and In-situ Al4.5Cu-5TiB2 Composite by Mervin A. Herbert, Chandan Sarkar, R. Mitra and M. Chakraborty Metallurgical and Materials Transactions A. 38(9) 2110-2126 (2007)
Microstructure and mechanical properties of mechanically alloyed and spark plasma sintered amorphous-nanocrystalline Al65Cu20Ti15 intermetallic matrix composite reinforced with TiO2 nanoparticles by D. Roy, S. Kumari, R. Mitra, and I. Manna Intermetallics 15(12) 1595-1605 (2007)
Microstructure and Mechanical Properties of Mechanically Alloyed and Spark Plasma Sintered Amorphous /Nanocrystalline Al65Cu20Ti15 Matrix Composite with Nano-TiO2 Dispersion by Roy D., Kumari S. , Mitra R. , Manna I. Intermetallics 15 1595-1605 (2007)
Oxidation Behaviour of the Mo-Si-B and Mo-Si-B-Al Alloys in the Temperature Range of 700-1300oC by Sharma Paswan, R. Mitra and S.K. Roy Intermetallics 15 1217-1227 (2007)
Mechanical Behavior and Oxidation Resistance of Structural Silicides by R. Mitra International Materials Review 51(1) 13-64 (2006)
Microstructure and Mechanical Behaviour of Reaction Hot Pressed Multiphase Mo-Si-B and Mo-Si-B-Al Intermetallic Alloys by R. Mitra, A.K. Srivastava, N. Eswara Prasad, and Sweety Kumari Intermetallics 14(12) 1461-1471 (2006)
Oxidation Behaviour of Mo-Si-B and Mo-Si-B-Al Alloys in the Temperature Range of 400-800oC by Sharma Paswan, R. Mitra, and S.K. Roy Materials Science and Engineering A 424 251-265 (2006)
Effect of Mo on Microstructure and Mechanical Behaviour of Cast Nbss-Nb5Si3 In-Situ Composites by K. Chattopadhyay, G. Balachandran, R. Mitra, and K.K. Ray Intermetallics 14(12) 1452-1460 (2006)
Effect of microstructural parameters and Al alloying on creep behaviour, threshold stress and activation volumes of molybdenum disilicides by R. Mitra, K. Sadananda and C. R. Feng Intermetallics 12 827-836 (2004)
In-Situ Study of Deformation Mechanisms in Sputtered Free-Standing Nanocrystalline Nickel Films by R. Mitra, W. A. Chiou and J. R. Weertman Journal of Materials Research 19(4) 1029-1037 (2004)
Micromechanics model concerning yield behaviour of nanocrystalline metals by T. Morita, R. Mitra and J. R. Weertman Materials Transactions Japan Institute of Metals 45(2) 502-508 (2004)
Microstructure, Mechanical Properties and Oxidation Behaviour of a Multiphase Mo-Cr-Si-Al Alloy-SiC Composite Processed by Reaction Hot Pressing by R. Mitra and Rohit Khanna Materials Science and Engineering A A382 150-161 (2004)
Stability and response to rolling of the interfaces in cast Al-SiCp composites by Mitra R., Chalapathy Rao V. S., Chakraborty M. Materials Science and Engineering A A379 391-400 (2004)
High temperature deformation behaviour of coarse and fine-grained MoSi2 with varying silica content by R. Mitra, N. Eswara Prasad, S. Kumari and A. Venugopal Rao Metallurgical and Materials Transactions A. 34A 1069-88 (2003)
In-situ TEM Tensile Testing of DC Magnetron Sputtered and Pulsed Laser Deposited Ni Thin Films by R.C. Hugo, H. Kung, J.R. Weertman, R. Mitra, J.A. Knapp, and D.M. Follstaedt Acta Materialia 51 1937-1943 (2003)
Structural Variations in Nanocrystalline Nickel Films by P. L. Gai, R. Mitra and J. R. Weertman Pure and Applied Chemistry 74(9) 1519-1526 (2002)
Effect of annealing on microstructure, residual stress and hardness of Al-Ti multilayered films by R. Mitra, A. Madan, R. A. Hoffman, W. -A. Chiou and J. R. Weertman Journal of Materials Research 16(7) 2064-2076 (2001)
Effect of process variables on the structure, residual Stress and hardness of Sputtered Nanocrystalline Nickel Films by R. Mitra, R. A. Hoffman, A. Madan and J. R. Weertman Journal of Materials Research 16(4) 1010-1027 (2001)
Effect of MoSi2 and Nb reinforcements on mechanical properties of Al2O3 matrix composites by A. Chakraborty, S. V. Kamat, R. Mitra and K. K. Ray Journal of Materials Science 35 3827-3835 (2000)
Creep and fatigue properties of high temperature silicides and their composites by K. Sadananda, C. R. Feng, R. Mitra and S. C. Deevi Materials Science and Engineering A 261 223-238 (1999)
Effect of minor alloying with Al on oxidation behaviour of MoSi2 at 1200 C by R. Mitra and V. V. Rama Rao Materials Science and Engineering A 260 146-160 (1999)
Effect of small Al alloying on microstructure and mechanical properties of molybdenum disilicide by R. Mitra, V. V. Rama Rao and A. Venugopal Rao Intermetallics 7(2) 213-232 (1999)
Structure and mechanical behavior of bulk nanocrystalline materials by J. R. Weertman, D. Farkas, K. Hemker, H. Kung, M. Mayo, R. Mitra and H. Van Swygenhoven MRS Bulletin 24(2) 44-50 (1999)
Elevated temperature oxidation behaviour of titanium silicide based materials by R. Mitra and V. V. Rama Rao Metallurgical and Materials Transactions A 29A (6) 1665-1675 (1998)
Microstructure and mechanical behaviour of reaction hot pressed titanium silicide based alloy and composite by R. Mitra Metallurgical and Materials Transactions A 29A 1629-1641 (1998)
Oxidation behaviour of reaction hot pressed MoSi2/SiC composites at 500 C by R. Mitra, V. V. Rama Rao and Y. R. Mahajan Materials Science and Technology 13(5) 415-419 (1997)
Processing-microstructure-property relationship in reaction hot pressed MoSi2 and MoSi2/SiC composites by R. Mitra, Y. R. Mahajan, N. E. Prasad and W.-A. Chiou Materials Science and Engineering A 225 105-117 (1997)
A study of the crack path in flake graphite cast iron using profilometric analysis by K. K. Ray, R. Mitra and A. Bhaduri Cast Metals 8(2) 65-71 (1995)
A Study of the Crack Path in Flake Graphite Cast Iron using Profilometric Analysis by Ray K. K., Mitra R. , Bhaduri A. Cast Metals Volume 8, Number 2 65-71 (1995)
Interfaces in discontinuously reinforced metal matrix composites: An overview by R. Mitra and Y. R. Mahajan Bulletin of Materials Science 18(4) 405-434 (1995)
Effect of particle size on the thermal expansion of TiC/Al XDTM composites by Z. R. Xu, K. K. Chawla, R. Mitra and M. E. Fine Scripta Metallurgica et Materialia 31 (11) 1525-1530 (1994)
Chemical Reaction Strengthening of Al/TiC metal matrix composites by isothermal heat treatment at 913 K by R. Mitra, M. E. Fine and J. R. Weertman Journal of Materials Research 8 (9) 2370-2379 (1993)
Interfaces in Al/TiC composites prepared by in-situ process by M. E. Fine, R. Mitra and J. R. Weertman Zeischrift Metallkunde 84(4) 282-285 (1993)
Interfaces in as-extruded XD Al/TiC and Al/TiB2 metal matrix composites by R. Mitra, W.-A. Chiou, M. E. Fine and J. R. Weertman Journal of Materials Research 8 (9) 2380-2392 (1993)
Internal stress and work of adhesion by M. E. Fine, R. Mitra and K. K. Chawla Scripta Metallurgica et Materialia 29 221-223 (1993)
Relaxation mechanisms at interfaces in XDTM Al/TiC metal matrix composites by R. Mitra, W.-A. Chiou, J. R. Weertman, M. E. Fine and R. M. Aikin, Jr. Scripta Metallurgica et Materialia 25 2689-2694 (1991)

Book Chapter/Section

Structure and mechanical properties of nanocrystalline thin films processed by multi-target magnetron sputtering by Sahu B.P., Mitra R. Low-Dimensional Materials, Systems and Applications, Volume 1: Principles, Methods, and Approaches in Electronics and Photonics 1 239-266 (2025)
Thermal Stability of Nanocrystalline High Entropy Alloys (HEAs) Synthesized by Mechanical Alloying (MA) by Sikdar K., Roy D., Mitra R. Handbook of High Entropy Alloys: Fundamentals to Applications 199-225 (2025)
Advanced techniques for characterization of structure, composition and mechanical behaviour by Mitra R. Future Landscape of Structural Materials in India 309-353 (2022)
Chapter 9 - Metal Organic Framework based nanomaterials as suitable electrocatalysts for evolution of Hydrogen by Maitra S., Mitra R. , Nath T. K. Metal Organic Framework-based Nanomaterials for Energy Conversion and Storage: Micro and Nano Technologies, ISBN: 9780323911795 185-203 (2022)
High Temperature Environmental Degradation Behavior of Ultra-High Temperature Ceramic Composites: Case examples of Zirconium and Hafnium Diboride by Mitra R., Mallik M. , Kashyap S. K. Handbook of advanced ceramics and composites 1-35 (2019)
Oxidation behavior of silicides by Mitra R. Diffusion Controlled Growth and Oxidation of Metal-Silicides 127-156 (2019)
Silicides and Silicide Matrix Composites for High Temperature Structural Applications by Mitra R. Handbook of advanced ceramics and composites 1-55 (2019)
Molybdenum Silicide-based Composites by Mitra R. Intermetallic Matrix Composites - Properties and Applications 95-146 (2018)
Oxidation and environmental degradation of intermetallic matrix composites by Mitra R. Intermetallic Matrix Composites - Properties and Applications 321-358 (2018)
Structural Intermetallics and Intermetallic Matrix Composites: An Introduction by Mitra R. Intermetallic Matrix Composites - Properties and Applications 1-18 (2018)
Development of composite materials for high temperature and light weight structural applications by Mitra R. Annals of INAE 107-121 (2017)
Structural Intermetallics by Mitra R., Wanhill R. J. Aerospace Materials and Materials Technologies, Part of the Indian Institute of Metals Series, Volume 1: Aerospace Materials 229-245 (2016)

Others

Corrigendum to Resistance to cyclic oxidation and evolution of oxide scale in 2.5D and 3D Cf/SiC composites with Si-B-C added matrix [J. Eur. Ceram. Soc. 45 (2025) 117666] (Journal of the European Ceramic Society (2025) 45(16), (S095522192500487X), (10.1016/j.jeurceramsoc.2025.117666)) by Krishna R., Udayakumar A., Mitra R. Journal of the European Ceramic Society 46 117666- (2025)

Conferences

Polymer Containing MOF(PcMOF) in Smart Coating Application by Maity P., Mitra R. , Singha N. K. 16th International Conference on Advancements in Polymeric Materials (APM-2025) Advancement in Petrochemical Sector & Empowering Sustainable Development Leading to "Viksit Bharat" - (2025)
Grain boundary serrations: An effective approach to mitigate high-temperature hot corrosion in Inconel 617 by Bhuyan P., Pradhan S. K., Mitra R. , Mandal S. European congress and exhibition on advanced materials and processes (EUROMAT 2019) - (2019)
Structural evolution, mechanical and corrosion behavior of NixZr1-x alloy thin films processed by dc magnetron co-sputtering by Mitra R. Third International Conference on Nanomaterials: Synthesis, Characterization and Applications (ICN 2018) - (2018)
Structural evolution of dc magnetron sputtered NixZr1-x alloy thin films by Mitra R. International Conference on Microscopy - (2018)
Structural Integrity of ZrB2-SiC based ultrahigh temperature ceramic composites at high temperatures and extreme environments by Mitra R. Structural Integrity Conference & Exhibition - (2018)
Structure and Chemistry of Interfaces in Sintered SiC and ZrB2-SiC Based Composites by Mitra R. International Conference and XXXVIII Annual Meeting, Electron Microscope Society of India - (2017)
Molybdenum and niobium silicide based multiphase alloys: structure-property relations and high temperature oxidation behavior by Mitra R. International Conference in Materials Engineering - (2017)
Effect of Fe addition on the oxidation behaviour of multiphase Mo76Si14B10 alloy at 1300 °C in dry and moist air by Kumar N., Roy B. , Das J. , Mitra R. CORCON 2016 - (2016)
Effect of Zr Addition on oxidation behavior of Mo-Si-B alloys in dry and moist environments by Mitra R., Kumar N. K., Das J. Materials Science & Technology - (2016)

Symposium

Advancing Water Safety: Detection of Heavy Metals in Water Using Functionalized Metal Organic Framework by Maity P., Mitra R. , Singha N. K. ACS-CRSI Early Career Researchers' Symposium 2024 - (2024)
Polymer containing Metal-Organic Framework (PcMOF) for Removal of Lead Ion (Pb ²) in Water Purification by Maity P., Mitra R. , Singha N. K. CompFlu 2022 - (2022)

Workshop

Polymer-containing Metal-Organic Framework (PcMOF) For Efficient Removal of Lead from Water: Applications In Water Purification by Maity P., Mitra R. , Singha N. K. Rubber Technology Centre, IIT Kharagpur - (2023)

Book

Intermetallic Matrix Composites - Properties and Applications by Mitra R. Intermetallic Matrix Composites 1-471 (2018)
Structural Intermetallics and Intermetallic Matrix Composites by Rahul Mitra Structural Intermetallics and Intermetallic Matrix Composites - (2015)

Metallurgical and Materials Engineering

Faculty

Rahul Mitra

Responsibilities

Research Areas

Principal Investigator

Co-Principal Investigator

Ph. D. Students

Adarsha Ranjan Mishra

Ghewade Hrishikesh Dinkar

Jyoti Prakash Beura

Koushik Sikdar

Marupalli Bharatcharangoud

Payel Maity

Raashid Firoz

Ramya Krishna

Sadananda Behera

Sanjit Kumar

Sarthak Roy

Soma Hansda

Sudipta Roy

Thinesh Kumar S

Virushni S N